Now On Sale
D9 Breathable Drysuit$1,299.95
The new D9 Breathable Drysuit is Waterproof’s answer to the growing demand for a light traveler, tropical diving and snorkeling drysuit. Its extremely light and breathable properties add to the comfort of the user. The light quad layer fabric with the breathable membrane in combination with ultra-sonic welded socks makes the suit easy to fold and transport. It weighs just under 5 lbs - valves included. The suit is equipped with integrated suspenders and together with the crotch strap they form a telescope waist. Thanks to this telescope waist construction, the ergonomics of the suit give a feeling of ordinary cloth. The D9 is perfect for tropical diving or snorkeling in colder waters. Included: Suspenders, low pressure hose and light weight ventilated bag Suggested boot: Waterproof B5 Marine Boot Key Features: 4-Layer Breathable Ultra light shell TIZIP Master Seal Front zipper Fabric socks Quick-dry Cordura Nylon Quad-Lam Flexible Dry Zipper Cover SI Tech Valves Telescope Torso Warm Cuffs Available in both men's and women's sizes.
Now On Sale
Nitrox Tank Decal
On Sale: $4.00
Any time you fill a tank with nitrox, it must be identified as such. This will help to prevent accidents in the event that someone uses a tank filled with nitrox without taking the proper precautions. The industry standard for tanks filled with nitrox is to mark the tank with a tank wrap, as well as identify the mixture with a label or tag. Nitrox Tank Decal Sticker (Large) This item features both the Scuba Diving International and the Technical Diving International agency logos, as well as the message "NITROX". This tank wrap has an adhesive back to provide easy cylinder installation. The dimensions for this item are 24'' x 6'' (61cm x 15.2cm).
Now On Sale
Hog D3 Warm Water First Stage
On Sale: $135.00
Hog D3 First Stage offers better performance than the D1 in a smaller size and utilizes several of the suggestions users made on how to make the D1 even better. the D3 is a true industry innovation! The D3 LP Turret swivel will rotate a full 360 degree with the hoses attached in any LP port, without hanging up on the DIN hand wheel. DIN variant comes with the Delrin Din Cap
Now On Sale
On Sale: $79.99
With over two years in the making, this tough yet timeless mask incorporates design elements of the past with new design technology. The Pioneer features a full metal frame, exclusive easy‐to‐use strap release buckle system, and super‐view peripheral lenses with Saint Gobain Diamant ultra‐clear tempered glass. Inspired by historical heroes of the Diving Industry, Oceanic is proud to introduce the brand new Pioneer Mask line. With over two years in the making, this tough yet timeless mask incorporates design elements of the past with new design technology. The Pioneer features a full metal frame, exclusive easy‐to‐use strap release buckle system, and super‐view peripheral lenses with Saint Gobain Diamant ultra‐clear tempered glass. Ultra‐soft silicone skirt molded directly to a rigid inner frame for extremely low internal volume Full metal aluminum frame provides added strength and durability Low volume, dual lens design with unsurpassed viewing angle Skirt Tube Mounted Buckles reduce pressure on face Exclusive one‐touch buckle adjustment 3D strap design that snugly fits against the head's natural curvature for unprecedented grip and comfort Saint Gobain Glass Diamant ultra‐clear tempered glass provides optimum vision and color quality
Now On Sale
Sea Dragon 1200$299.00
The perfect setup for ultra compact cameras With its included Flex-Connect grip, Micro Tray and adapter for GoPro cameras, the Sea Dragon 1200 Photo/Video/Dive Light is the perfect setup for providing stability and a wide source of light to ultra-compact and full sized cameras. Easily expand with Flex-Connect accessories Quickly and easily expand Sea Dragon lighting with Flex-Connect - add grips, Flex Arms, trays and other accessories with just a "click!" Flex-Connect allows you to transform your camera set from compact to full-featured in just seconds, providing a quick way to adjust to any dive environment. Powerful 1200 lumen LED light using the latest LED technology, featuring 6x CREE XPL LEDs One button control for easy operation - one button to power light on/off and select brightness Three brightness levels: 100%, 50% and 25% 75 minute burn time at full power and constant brightness Depth rated to 200 feet/60 meters - Guaranteed Easy to expand with Flex-Connect™ trays, grip and Flex Arms Quick-release button to detach light and aim in crevices and hard to reach areas Auto Flash Detect Mode turns light off for 2 seconds when external flash is detected 100° wide beam angle evenly illuminates the subject with no hot spots Corrosion-proof metal light head for heat dispersion and durability Removable Li-Ion battery w/ charger and international plug adapters included Waterproof battery compartment Universal mounting screw fits SeaLife and other brands of underwater cameras w/ standard ¼-20 tripod mount Sea Dragon 1200 Photo/Video/Dive Light Specifications Body Material: Anodized aluminum light head with fiber-reinforced polycarbonate bodyLight Source/Bulb Type: 6 x 3w LED LIght (CREE XPG LEDs)Brightness: 1200 lumens (Maintains 1200 lumens through burn time at full power)Effecttive Range: 3 ft/1 m (depends on caera model and visibility)Brightness Control: 100%, 50%, and 25% powerColor Temperature: 5300 ~ 5700KBeam Angel: 100%Battery: Lithium Ion 7.4v, 3100 mAh, 23Wh (included)Battery Charge Time: 170 minutesRun Time: 75 minutes at full power/150 minutes at halfpower/300 minutes at quarter powerDepth: Tested to 200 feet/60 metersLight Modes: Full power (100%), half power (50%), and quarter power (25%)Dimensions: 8.5" x 7.3" x 2.3" (22cm x 19cm x 6cm), fully assembled with light head, battery, grip and tray 4.8" x 2.2" x 3.8" (12.2cm x 5.6cm x 9.7cm), head onlyWeight: 21 ounces (598 grams), light head, battery, grip and trayBulb Life: 35,000 hoursO-ring: Dual NBR o-rings (lube included)Buoyancy: Negative IN THE BOX: Sea Dragon 1200 Underwater Photo/Video/Dive Light head Flex-Connect Micro Tray w/ standard ¼-20 mounting screw Flex-Connect grip Lithium Ion battery for SL983 and SL984 lights AC Power Adapter, charging tray, and international plug adapters Adapter for GoPro cameras Spare O-rings, O-ring lubricant, O-ring removal tool Instruction manual Sea Dragon Case **Camera and GoPro not included
Delrin Nuts (pair)
• Milled from solid block of Delrin thermoplastic • Creates a strong, durable alternative to traditional wing nuts • Knurled gripping surface for easier assembly/disassembly of dive gear • Available in two thread sizes – 3/8” and 5/16” PART NUMBER WHOLE DIAMETER FITS ON HL407 3/8" Delrin Nuts (Pair) 7.25" Bands HL408 5/16" Delrin Nuts (Pair) 8" Bands
G1 Drysuit Glove Liner
The G1 Glove Liners can be used under drygloves or wet mitts. Using hydrofoam provides the confidence that in the case of a dryglove failure, the glove liners will retain some of the thermal protection they offered when dry, and the bamboo derived fabric lining inside provides excellent thermal protection. The glove liners can be used with traditional thinsulate gloves in a layering system under the drygloves for extreme conditions.The G1 Glove Liners can be used under drygloves or wet mitts. Using hydrofoam provides the confidence that in the case of a dryglove failure, the glove liners will retain some of the thermal protection they offered when dry, and the bamboo derived fabric lining inside provides excellent thermal protection. The glove liners can be used with traditional thinsulate gloves in a layering system under the drygloves for extreme conditions. The minimalist design makes donning easy even when hands are cold and wet, and the carbonite finish provides excellent grip. These mitts offer surprising levels of dexterity whilst maintaining outstanding warmth.
TIZIP Masterseal Drysuit Zipper
Replace your drysuit zipper with the new TIZIP Masterseal drysuit zipper! Ultra flexible due to it's plastic design, yet rugged enough for even the harshest environments! Urethane wings make installing on any other urethane drysuits (smooth plastic feeling on inside) SIMPLE with our Dry Adhesive Tape. Can also be sewn in to any other suit and aquasealed for a dry install. Please select your size from the drop downs below. You can also send your suit to DRIS for our Professional Service Department to Install your new TI Zipper. Technical The TIZIP MasterSeal 10 is made from high-strength fabric coated with thermoplastic polyurethane. The extra strong plastic teeth are fixed on the top and bottom of the zipper tape. The zipper’s coupling elements keep the sealing edges tightly sealed together when the zipper is closed. The zipper tape can be both welded and glued. The TIZIP MasterSeal 10 slider is made from a metal compound which is non skin irritating and salt water resistant. The slider movement is contact free and does not wear on the zipper tape or the sealing edge. Tightness The TIZIP MasterSeal 10 is easy to operate, and pressure tested to 500 mbar. Heavy bending may cause leakage. Please try to avoid. Dirt or Sand The TIZIP MasterSeal 10 is highly resistant to damage caused by dirt or sand. However if dirt or sand are present, the zipper should be cleaned with soap and water. Dirt particles can affect the sealing function if they get caught between the chain profiles. If the TIZIP MasterSeal 10 closure is used to protect life or sensitive material, the sealing function and cleanliness of the chain area should be thoroughly checked prior to every usage. Stability The TIZIP MasterSeal 10’s performance in terms of strength and durability is very good. However, sharp bending or twisting should be avoided. When closed, the TIZIP MasterSeal 10 has a cross-breaking strength of minimum 125 N/cm. ** Due to the odd bend of a Whites Fusion Drysuit, this zipper does NOT work on them.** *** Please contact us with ANY install questions that you have on your suit or application*** DEALERS WELCOME AS WE ARE THE US DISTRIBUTOR FOR TIZIP
Now On Sale
Aqua Sport Drysuit
Redesigned for 2014!! The USIA Aqua Sport is a highly efficient, affordable dry suit that is the dry suit of choice for many dive store rental departments due to it's durability. The suit is built out of 200 Denier series nylon with 1000 Denier Cordura thigh protectors. It is highly durable and has excellent reviews from customers for its attractive design and very affordable price. The suit comes standard with attached hardboots, suspender tabs, crotch strap, zipper flap cover, and is available in a rear or diagonal front entry design. This light weight nylon bi-lam suit comes standard with Neoprene Vulcanized hard sole boots, Latex neck and wrist seals, LP hose and variable volume Si Tech valves. This is one suit you can't pass on at this price!!! Diagonal Front Entry Design with zipper flap cover* Susupender Tabs* (Does not come with suspenders) Crotch Strap* SiTech Low Profile Exhaust Valve. SiTech Rotating Inflate Valve. Hard Sole Boots. YKK Water/Air Tight Zipper. Custom Sizing Available Comes with Neck Ring, Talc, Zipper Wax, Inflator Hose, and a Drysuit Bag! Suit is built on Demand and takes 2-4 weeks to be completed. Made in the USA - Takes approximately 4 weeks to be built from the manufacturer *New for 2014 Below color choices are for the TOP of the suit, the bottom remains black. **Sizes XXL - Short, XXL, and XXXL are considered semi custom suits For FULL or SEMI CUSTOM suits, please click HERE for the form, or feel free to get in touch and we will email it prior to ordering. If you are unsure on your size, please email us a completed form from the above link, and we will get in touch with the manufacturer to pick your size. Semi custom means you fit into a LG, but need 2 inches off the length. Or you Need a MD in the body and 3"s in the length. These can ONLY be calculated by the manufacturer. Cost is determined depending on the amount of alterations needed for the best fit. Made in the USA. Please note: Suit only available in black, but trim colors can be changed in the dropdowns below. Boot size: Please use your exact street shoe size, or the next biggest size. Boots are already sized for drysuit socks and run big.
Xdeep Black BT Software Upgrades
Upgrade your Xdeep Black BT Computer with these software upgrades! Turn your Black BT into a Nitrox Computer with the Nitrox BT to EANx Software upgrade Turn your Black Nitorx into a full Trimix computer with the Trimix EANx to TMX Software upgrade Instantly upgrade your Black BT to a Black Trimix Computer with the Full Trimix BT to TMX Software upgrade Nitrox Upgrade: - BT to Nitrox Three mixes up to 100% O2 switchable underwater PPO2 Alarms additionally to general alarms Trimix Upgrade: - EANx to TMX 16 mixes with "backup mix" option - user can set the mix as ON, BACKUP and OFF. The mixes in ON state will be selected as the computer during the dive. BACKUP mixes can be selected manually by user (it may be partner's gas).PPO2 Alarms additionally to general alarms PPO2 alarms additionally to general alarms IMPORTANT: **Unit must have installed EANx software before installing TriMix upgrade.** Full Trimix: - BT to TMX 16 mixes with "backup mix" option - user can set the mix as ON, BACKUP and OFF. The mixes in ON state will be selected as the computer during the dive. BACKUP mixes can be selected manually by user (it may be partner's gas).PPO2 Alarms additionally to general alarms PPO2 alarms additionally to general alarms; Your software download activation code along with software updating instructions will be sent to you through your provided email address 24-48 hours after your order is processed.
Aqua Lung Military
Luminox 4200 Series I Watch$895.00
Developed for the finest maritime warriors The new Luminox 4200 Series I watch was developed with cooperation of Aqua Lung, US Navy Special Forces and Luminox? Black PVO Plated Stainless Steel case Anti-reflective Sapphire Crystal Multi Jewel Swiss Quartz Movement Lithium 8+ year battery Water Resistant to 200 meters Luminox self powered illumination US AMU listed
Stealth 2 Frameless Mask$39.95
We would like to introduce the replacement to the popular Edge Stealth. The new Stealth 2 mask comes in black, clear and white and has a fit that almost universally fits all faces. With its sleek styling, great field of view, soft comfortable skirt, and great pricing this mask is a perfect choice for any diver and snorkeler. All masks come in a clear clam shell mask box.
Bracket for LED Light$25.00
The backup light bracket is machined from Delrin® for added strength. Each kit includes a template sticker and necessary hardware for proper placement and security of the bracket to your helmet. The set screw goes in the channels along the backup light to hold it securely in place so you can turn it on and off. To mount simply place the sticker where you would like on the helmet and drill through the black holes.
ProGrip - Floating GoPro Grip$29.99
Floats GoPro and SmartRemote Dry storage(10 feet deep) for up to 2 GoPro batteries (Hero 3/3+/4) Mounts GoPro remote flush with grip Top section ejects for an additional ultra-compact grip Mounts to any backpack, scuba bcd, or strap with StrapMount (sold separately) The ProGrip is more than just a basic GoPro hand grip. Setting the new standard for grips, the ProGrip features dry storage (10ft deep) for 2 batteries (Hero4 and Hero3/3+) or anything else you need to keep safe and dry. The top section allows the GoPro remote to be mounted flush with the grip, enabling comfortable camera control. An ergonomic rubber grip enhances durability while the aggressive tread pattern ensures it does not slip in wet conditions. The top section also ejects from the main grip, providing an additional ultra-compact grip that fits in your pocket. With the PolarPro StrapMount (sold separately) the ProGrip mounts to any backpack, scuba bcd, or strap. ProGrip redefines what a GoPro grip should be and is ready to take on your next adventure.
StrapMount - GoPro BackPack/Scuba Mount$29.99
Securely mounts all GoPro's to any backpack, scuba bcd, life jacket, straps Quickly install/remove GoPro with quick-release system Capture epic POV without being constrained with a head or chest harness Constructed out of rigid glass filled nylon Endless mounting possibilities
DRIS Dive Gear
1000 Lumen Dive Light
This high power xml t6 dive aluminum LED flashlight boasts an upgraded driver which helps it pump out an amazing 1000 lumen and is made to the stringent DRIS standards! Built on the same platform and size as our popular 500 Lumen light, this thing cranks out the power in handheld light. It comes with a high strength 5mm glass lens, aluminum body with double o-ring design to prevent leaks, center point attachment, and is the perfect size for gloved or ungloved hands while hanging perfectly on your BP/W! This light can also safely be used on the surface. The twist head design allows the light to be turned on or off and due to the aluminum design, it doesn't automatically turn on at depth. With an 11.5degree beam angle, and a nice spill, this adds a lot of light for your dives!! 1. CREE LED with lifespan of 100.000hours 2. Made of aircraft-grade aluminum 3. Hard-anodized finish/black 4. Ultra clear 5mm tempered glass 5. Anti-roll, slip-resistant body design 6. Waterproof to 120 meters (360feet) 7. Accessories: Lanyard, o-rings are included 8. 1 Year Warranty Measures 8"s long with the head being 1.5"s wide Voltage: 3-4.2V Power/battery: 3*C - INCLUDED Lumen(max): 1000lumen Runtime(max): 5 Hours!!! !!!30-DAY UNCONDITIONAL WARRANTY!!!
Hog D1 Regulator Set
Are you looking out for a two in one first stage regulator, which can work well in cold and warm water as well? We have brought to you Hog D1 Regulator Set, which provides you the option of the HOG D1- cold water environmentally-sealed balanced first stage or warm water First Stage with the diver-adjustable HOG technical second stage. This package is not only highly durable but also gives high performance and protection from freezing. The best part is that you get the regulator with customised length of the hoses. Hog D1 Regulator Set is considered as one of the most impressive regulators in the market because of its highly reliable and adaptable nature. Advanced features of the regulator: Two in one feature Durable / Reliable High Performance Customised length of hoses Protection from freezing (Depending on first stage picked) 5th LP port for the best possible hose routing Comes with a delrin DIN cap to keep the first stage threads safe Upgrade to a Coldwater Firststage DIN CAP INCLUDED We also provide training sessions for those who interested to do annual servicing of their regulators on their own. Our training gives you a real time experience on the functioning of the regulator. We also provide TDI certification for the after the training session. For further information on this, you can visit our website.
DRIS Dive Gear
Double Braided Low Pressure Hoses
These hoses are tested to 1500PSI and have a minimum burst pressure of 6000psi which is well above the pressure that will go thru it for your regulator. These work with all breathing gases and have are made with a TPU/ Nylon/Polyester blend. CE EN250 rated with chrome plated brass fittings for a durable and strong connection. Available in multiple sizes and colors in the dropdown box below.
DRIS Dive Gear
28lb BP/W System
WOW!!! What a package we have put together for you! Get our incredible 28lb Trianta Singles wing, a Light Monkey Harness, Hog Backplate, Highland Stainless Steel Cambands, and a Stainless Steel Single Tank Adapter! Everything you need to get started and have the Ultimate BP/W system. Top of the line equipment..... Incredible DRIS Pricing....this package can't be beat!! This wing comes with a LIFETIME Warranty against manufacturers defects!
DRIS Dive Gear
1k Shorty Dive Light
Introducing the DRIS 1k Shorty!! This 1000 lumen light is extremely versatile. Great for any recreational diver diving in cold quarries/lakes or looking under a reef to see a nurse shark! Pair it with the Soft neoprene goodman glove, and you have a hands free light that even the experience technical diver will cherish as they take this light to 450 feet. With it's center back attach point, you can even clip this off to a D-Ring or retractor to ensure you don't lose this bright light. The 1k Shorty is powered by only 3 AA batteries in a triangle battery back that is protected by a triple o-ring design to ensure you don't flood it. This gives the light a 1 hour burn time at max brightness and a run time of 4 hours of usable light. With the built in overload circuitry, you can even use this on the surface, and the light will automatically dim to help prevent damage to the LED. You can see this light is one compact light and fits perfectly on a Compact Disc! The scale of the main picture makes it look bigger, but it fits tip to tip right on top of a regular CD. -Lamp: CREE XML U2 LED (single) -Lumens:1000 -Burn time: Over 50,000hours on the LED life -Batteries:3x AA(Alkaline) Included - 1.5volts for other batteries used --- Light performs better with higher end batteries (lithium polymer or rechargeable) Burn tests done with Alkaline batteries -Weight: .75lbs with batteries -Size: 2.2"(Head)x1.5"(Body)x1.65"(Tail)x4.9" -T-6061-T6 Durable Aluminum alloy, anti-corrosive anodized housing -Twisting bezel for on/off function -9 Degree Beam Angle -Waterproof to 450 feet !!!30-DAY UNCONDITIONAL WARRANTY!!!