815 267 8400

DIN Adapters, Plugs, Caps

Prevent accidental gas escape with DIN adapters, plugs, and caps. Add a DRIS DIN to Yoke Adapter for flexibility when traveling.

Set Ascending Direction

8 Item(s)

per page
  • This product has Video Review.

    DIN to Yoke Adapter
    $40.00

    DRIS Dive Gear

    DIN to Yoke Adapter

    33 Review(s)

    Convert a DIN regulator to standard yoke Quick spin-on adapter Triple chrome plating

  • Delrin Din Cap
    $9.99

    Trident

    Delrin Din Cap

    25 Review(s)

    Machined from Delrin Nylon Lanyard COLOR: Black

  • This product has Video Review.

    Highland SS Din Plug
    $15.99

    Highland

    Highland SS Din Plug

    23 Review(s)

    Precision machined from 316 stainless steel Protects DIN valve threads Seals water out with Viton o-ring Oxygen clean Most divers have experienced the pain of getting to the dive site with their full steel cylinders, only to find that all of the gas had escaped due to an accidental valve opening. You can protect against this problem with these stainless steel DIN plugs. These plugs are precision machined from 316L stainless steel stock and are designed to seal either the 240 BAR or 300 BAR cylinder valves. The o-ring seal prevents leakage of the cylinder gas, even if the valve creeps open due to jarring or temperature change. When this extremely hard stainless steel DIN plug is installed, your fragile brass valve opening is protected against bending and deformation that would prevent you from installing your DIN regulator. High quality stainless steel DIN plugs are available anywhere, but none are found with this quality at this price. Protect your cylinder valves today.

  • Delrin Din Plug
    $9.99

    Trident

    Delrin Din Plug

    23 Review(s)

    Machined from Delrin Nylon Lanyard COLOR: Black

  •  Inflator Hose Plug Set
    $11.49

    XS Scuba

    Inflator Hose Plug Set

    4 Review(s)

    SEAL HOSES CLOSED BEFORE CLEANING Often during the servicing of regulators, the hose ends are submerged into a solution used for cleaning metal regulator parts. This is an effective way to remove corrosion from hose fittings, but at the same time you may be damaging the inner lining of the hose. The interior of scuba hoses should never be exposed to any type of cleaning solution. The damage that can occur is the reduction of pressure holding strength, the break-down of the inner lining resulting in the potential reduced flow of gas and premature failure of the hose. It is the recommendation of XS Scuba that the ends of all scuba hoses be sealed and plugged during servicing to insure that the inner lining are protected from cleaning solutions. Note: If the interior of hoses requires cleaning because of contamination, the recommendation is to flush with only hot water followed by purging with dry, clean compressed air. Inflator Hose Plug Set Male Plug: Standard BC quick-disconnect with o-ring seal Female Plug: 3/8 - 24 threads Never pressurize hose with plugs in place

  • Yoke Regulator Dust Cap
    $2.95

    Trident

    Yoke Regulator Dust Cap

    4 Review(s)

    Every diver needs to protect the regulators.  This Dust Cap from trident is perfect for procting your Yoke 1st stage from debris and moisture.  With its easy loop attachment you'll be able to keep this cap directly on your 1st stage for easy storage and reliability!   Protect First Stage Regulator from Contaminants Keeps Out Moisture, Dust, and Dirt For Yoke Style Regulators Equipped with Nylon Loop for Attachment to Yoke 1st Stage Non-Corrosive Impact Resistant Material

  •  Gauge Hose Plug Set
    $11.49

    XS Scuba

    Gauge Hose Plug Set

    3 Review(s)

    SEAL HOSES CLOSED BEFORE CLEANING Often during the servicing of regulators, the hose ends are submerged into a solution used for cleaning metal regulator parts. This is an effective way to remove corrosion from hose fittings, but at the same time you may be damaging the inner lining of the hose. The interior of scuba hoses should never be exposed to any type of cleaning solution. The damage that can occur is the reduction of pressure holding strength, the break-down of the inner lining resulting in the potential reduced flow of gas and premature failure of the hose. It is the recommendation of XS Scuba that the ends of all scuba hoses be sealed and plugged during servicing to insure that the inner lining are protected from cleaning solutions. Note: If the interior of hoses requires cleaning because of contamination, the recommendation is to flush with only hot water followed by purging with dry, clean compressed air. Gauge Hose Plug Set Machined from Delrin Male Plug: 7/16 - 20 threads with extended o-ring seal past swivel Female Plug: 3/8 - 24 UNF Never pressurize hose with plugs in place  

  •  Regulator Hose Plug Set
    $11.49

    XS Scuba

    Regulator Hose Plug Set

    2 Review(s)

    SEAL HOSES CLOSED BEFORE CLEANING Often during the servicing of regulators, the hose ends are submerged into a solution used for cleaning metal regulator parts. This is an effective way to remove corrosion from hose fittings, but at the same time you may be damaging the inner lining of the hose. The interior of scuba hoses should never be exposed to any type of cleaning solution. The damage that can occur is the reduction of pressure holding strength, the break-down of the inner lining resulting in the potential reduced flow of gas and premature failure of the hose. It is the recommendation of XS Scuba that the ends of all scuba hoses be sealed and plugged during servicing to insure that the inner lining are protected from cleaning solutions. Note: If the interior of hoses requires cleaning because of contamination, the recommendation is to flush with only hot water followed by purging with dry, clean compressed air.   Regulator Hose Plug Set Machined from Delrin Male Plug: 9/16 - 18 threads Female Plug: 3/8 - 24 threads Never pressurize hose with plugs in place

 
 

Set Ascending Direction

8 Item(s)

per page