4.5" Stainless Steel Double Ended Clip

This 3" Stainless Steel Bolt Snap is #304 stainless from the spring to the body!  No need to worry about rusting in any water conditions as these clips are also passivated.  Passivation is a process that involves dissolving the iron that gets imbedded into the clips surface when it is being made.  This process is done by immersing the stainless steel parts into an acid solution that rids the stainless of the rust producing iron and takes the clip back to it's Rust Proof form. RUST FREE

Shock Cord, or bungee cord as is commonly known, is a popular accessory item for lots of scuba divers.  Bungee cord is considered to be a more durable solution to surgical tubing for most scuba applications.  Bungee cord is suitable for all marine applications because it is rot-proof, waterproof, and resistant to mold, mildew and UV rays.  Bungee cord is continuous rubber bands in a durable nylon jacket.  Bungee Cord is perfect for securing SMB's or Lift Bags to diving rigs, OR for making regulator necklaces so popular with technical divers. Available in Black only. Sold by the foot.*  

Traditionally, SCUBA divers have relied on whistles as their only audible surface signaling device. But, if a diver is disabled and can't blow into the whistle, the whistle makes no sound at all. Equally frustrating and dangerous, if a diver needs to attract the attention of someone who is too far away to hear the whistle, the whistle is of no help.  Or, what would you do if you wanted the attention of your dive buddy underwater, for whatever reason, and he was simply distracted and not paying attention to you at that very moment? Traditionally, you would be forced to swim up to him or her until you got their attention.  Instead, using the DiveAlert PLUS a diver on the surface can sound a horn blast that can be heard up to a mile away! Or, DiveAlert PLUS can signal a dive buddy underwater!    DiveAlert PLUS is a small and lightweight pneumatic signaling device that harnesses the power of compressed air in your scuba tank to produce a distinctive sound both above and below the surface. Using quick-connect/disconnect couplings, DiveAlert PLUS becomes an integrated part of the power inflator on your BCD.    DiveAlert PLUS does not require any modification of your other equipment, and it does not interfere in any way with the normal operation of your other equipment.    When you need to get someone's attention while on the surface, you simply squeeze DiveAlert PLUS and it diverts a small amount of air from your scuba tank to make a powerful and piercing sound. Or, when you are underwater and want to attract attention, squeeze DiveAlert PLUS and it diverts a small amount of air from your scuba tank to make a buzzing noise to alert your dive buddy.    INSTALLATION - DiveAlert PLUS connects between the power inflator and the low-pressure hose by means of its quick-connect/disconnect hose fittings.    OPERATION - Once the tank is turned on and the DiveAlert PLUS connected, squeeze DiveAlert PLUS a little underwater for a subsurface signal or squeeze it a little harder on the surface for a loud surface signal blast.    Just make sure that before every dive you check that DiveAlert PLUS is installed correctly and functioning properly. Also be careful not to point DiveAlert PLUS toward yourself or toward anyone who is in close proximity to you when you activate the surface signal or loss of hearing could result.    MAINTENANCE - After each use, DiveAlert PLUS should be rinsed with fresh water. This is especially important after use in chlorinated swimming pools and in other water having corrosive substances. Additionally, it is highly recommended that you blow the water out of DiveAlert PLUS before storing. This can be done by pressurizing and activating both the surface and subsurface signaling elements. We recommend that you cup your hand over the surface signaling element to muffle the loud noise.    Specifications  Body and Internal Elements - Injection-molded Thermoplastic  Diaphragms - Stainless Steel  Couplings - Chrome-plated Brass    One-Year Limited Warranty  Ideations design, Inc., warrants DiveAlert PLUS to be free from defects in materials and workmanship for one year from the date of purchase from an authorized DiveAlert PLUS dealer. If any functional defects appear in a DiveAlert PLUS unit within the one-year warranty period, the unit will be either repaired or replaced at the option of Ideations design, Inc.   DV1 DiveAlert PLUS compatible with 85% of all power inflators DV2 DiveAlert PLUS compatible with the SeaQuest AirSource (including AirSource3 QD),Mares Air Control, Oceanic Air XS and Aeris AirLink alternate inflation regulator systems DV3 DiveAlert PLUS compatible with Tusa Duo-Air, ScubaPro A.I.R. 2, Atomic Aquatics SS1, Zeagle OctoZ and Sherwood's Gemini alternate inflation regulator systems.

This 3.5" Stainless Steel Bolt Snap is #304 stainless from the spring to the body! No need to worry about rusting in any water conditions as these clips are also passivated. Passivation is a process that involves dissolving the iron that gets imbedded into the clips surface when it is being made. This process is done by immersing the stainless steel parts into an acid solution that rids the stainless of the rust producing iron and takes the clip back to it's Rust Proof form. RUST FREE

Drysuit zippers.  These YKK replacement zippers are perfect for the DIY repair person.  Save your money and do it yourself!  If not, we can install it here for you.  YKK is the Premier Drysuit zipper on the market.  Zippers are measured from where the teeth start to where the teeth end. Check out Repair Prices Please select your size below.  We try to have these in stock at all times. If you need a custom size, please email us as we can get any length

Along with a c-card, there are some things all divers from beginner to expert need to have. Dive Rite's Divers Essentials Package has the miscellaneous, yet necessary items packaged together with a convenient way to carry everything. Contains a 28-page Dive wRites underwater notebook with pencil, line cutter, see-me tube, and 50ft finger spool, all easily stored in Dive Rite's exclusive XT Thigh Pocket.     This package includes:   XT Thigh Pocket (AC3201-XT) 28 page Dive wRites notebook w/ pencil (AC2062) Line Cutter (AC3208) See-me Tube (AC2756) 50ft Finger Spool (RE4820) 1.65 lb (.75 kg)

Contact cement for neoprene repairs. Waterproofs, seals and protects against abrasion. Quickly repairs and cements wet suits, dry suits, boots, gloves, fishing waders, orthopedic supports, inflatable toys, and hundreds of other rubber articles.

High performance lubricant for water tight and air tight zippers. Protects against rust, corrosion, chlorine and salt in all temperatures. Long lasting, contains no paraffin or silicone.

This Low Pressure to Inflator adaptor will add a low pressure inflator connection to any LP hose.  A must for any dive kit to ensure you have a back up inflator hose for you BC or Drysuit!!

 DiveAlert is a specially designed, small, light weight air horn that uses quick-connect/disconnect hose couplings to become an integrated part of your power inflator, breathable/inflator and buoyancy compensator. Installation is easy and only takes a moment.    Why have DiveAlert? What would you do in a diving emergency if you needed to get the attention of the pick-up boat or someone else on the water's surface? Before DiveAlert SCUBA divers had relied on whistles or a SMB (surface marker buoy) as their only signaling devices in such an emergency. But if the diver is disabled and can't blow into a whistle (or deploy the SMB) the whistle makes no sound at all. Or if the boat operator is not looking in the direction of a diver with a SMB deployed (if the diver was able to even deploy the SMB) the diver goes un-noticed.    Equally frustrating (and dangerous), if a diver needs to attract the attention of someone who is too far away to hear the whistle, the whistle is of no help. In contrast, Dive Alert enables divers, at the mere touch of a button, to generate a blast of sound that can be heard up to a mile away!    There are three different models available; one for approximately 85% of standard power inflator mechanisms model DA1. There are several breathable/inflator mechanisms that require a larger coupling for a higher flow of air so there are two models to accommodate them. The model DA2X and the modelDA3X.    Installation is easy and takes only a moment. Dive Alert does not require any modification of your other equipment, and it does not interfere in any way with its normal operation. When you need to get someone's attention on the water's surface, you simply press a button and Dive Alert uses a small amount of air from your scuba tank to make a piercingly 132db loud sound; even as little as 100 psi (6.9 bars) will give you a full-throated screech. Dive Alert can be heard from 1 mile (1.6 km) away.    DA1  Fits All Standard Inflators    DA2X  SeaQuest AirSource 1&2,  Zeagle OctoPlus,  Oceanic Air XS,  Mares AirControl    DA3X  ScubaPro Air 2,  Tusa Duo-Air,  Atomic SS1,  Sherwood Gemini,  Zeagle Octo-Z   Features: Models Available for Almost All Inflators and Breathable/Inflators Extremely Load (132db) Signal with a Touch of a Button Works with as little as 100psi (6.9 bars) Lightweight Design Increased Dive Safety Up to One Mile (1.61 km) Audible Range Easy to Install Injection Molded Thermoplastic, Chromed Brass and Stainless Steel Construction Owner's Manual 1 Year Limited Warranty

Keep your accessories clipped with this great Edge Mini Retractor. It comes with a 18" cord that can be locked in any desired position. 

Hose Mount Retractor for compass or dive computer

Mini Retractor with Quick Disconnect

      SPECIFICATIONS SIZE: 22.7 L x 15.1 W x 9 D inches Part Numbers: • 24061 - HangAir Hanger, 100/240VAC (US) • 24062 - HangAir Hanger, 100/240 VAC (Euro)   Accessories •HangAir Power Supply, US •HangAir Power Supply, Euro •HangAir Power Supply, 12 VDC   Due to the odd nature of the size of this product, additional shipping charges may apply that do NOT show up when you checkout.     Dries wetsuits, dry suits, turnout gear, rainsuits and heavy protective clothing in hours instead of days. High power waterproof fan pushes 120 cubic feet of air per minute Quick drying process retards the development of bad odors Safe low voltage power is supplied to the hanger fan through a 15 ft cord from a 100/240 VAC universal wall mounted adapter Wide shoulder construction prevents damaging creases in fabric Super strong nylon body with stainless steel hook supports 100 lbs Limited Lifetime Warranty   The UK HangAir® Drying System uses a high-power waterproof fan to completely dry and ventilate suits of all kinds in mere hours. By maintaining equipment with the HangAir® Drying System you can enjoy the comfort of a freshly dried suit before every excursion, ensure that your suit is blown clean and dry from the inside before storage, eliminate bad odors, and add years to the life of your equipment. The UK HangAir® is molded from incredibly tough plastic resin and sports a steel hook which will comfortably support up to 100 pounds. Safe, low voltage power is supplied to the hanger fan through a tough 15 foot cord attached to a universal power 100/240 VAC wall adapter.

Half the size The all new Nautilus LifeLine is less than half the size of our original radio and is incredibly simple to use   No MMSI & Registration No special or dedicated base units required.  No registration, subscriptions or service fees required.     Positively Buoyant Your Nautilus LifeLine floats! It is waterproof in all sea conditions.   Waterproof LifeLine GPS is waterproof. It is depth rated to 425 feet with cap closed.   5 Year Battery Life Just keep the o-ring clean and forget about it for the next 5 years!   Warranty 1 year manufacturer warranty included.   Accurate positiong Your gps position accurate to 1.5 metres and a man overboard distress message will be broadcast to all AIS equipped ships up to 34 miles away as well as a special DSC message to the marine radio on your own vessel.     Universal All modern commercial ships and most yachts are equipped with AIS and DSC allowing universal worldwide use of the all new Nautilus LifeLine.   AIS/DSC Technology Each LifeLine is programmed at our factory with an MID number allowing automatic AIS functionality as soon as your unit is powered up. Your ship’s MMSI must be loaded with the simple to use built-in optical sensor to activate DSC functionality.   Specifications AIS Transmit Power 1 Watt AIS Frequency 161.975 and 162.025 MHz DSC Transmit Power 0.5 Watt DSC Frequency 156.525 MHz Messages Individual Distress Relay, Distress Alert Environmental Temperature Range -25°C - +55°C Waterproof Depth 425 feet (130 meter) sea water Demensions 2.9 x 3.8 x 1.5 inch (75 x 97 x 39 mm) Weight 4.6 Oz (131g) including batteries