815 267 8400

Get the accessories you need for your Primary or backup dive lights

Set Ascending Direction

26 Item(s)

per page
  • Ships FREE in the USA!

    QRM Soft Handmount
    $95.00

    Dive Rite

    QRM Soft Handmount

    1 Review(s)

    The new patent pending Dive Rite Quick Release Mount will change the way you think about carrying your dive lights.  Now with ease, divers are able to switch between different lights without the need to carry additional handmounts.  Better yet, the handmount never has to come off of the diver's hand when changing lights.  With this new QRM system, divers even have the option to switch from a hand mounted light to a helmet mounted light, in just a matter of seconds.   Watch Lamar's video to see how easy this system is to use! The perfect compliment to the QRM is our new soft handmount. This is our most comfortable handmount yet. It is adjustable to fit most hands with or without gloves. Ambidextrous  it can be worn on either hand.  Two Options Available: Dive Rite Standard Striker Plate is compatible with all Dive Rite Lights Dive Rite Universal Strker Plate is compatible with Non-Dive Rite lights

  • Hard Goodman Handle
    $30.00

    Light Monkey

    Hard Goodman Handle

    10 Review(s)

    Hard goodman handle includes baseplate and U.  This is a replacement for your can light or can also be used with a backup with proper modifications depending on your light.

  • QRM - Quick Release Mount System
    $49.00

    Dive Rite

    QRM - Quick Release Mount System

    Dive Rite's patent pending Quick Release Mount system changes the world of dive lights and how they are carried.  The Quick Release Mount system is standard on all new Dive Rite lights, and can be retro-fitted to previous models of Dive Rite lights (with the two mounting holes on the bottom of the head).   The QRM uses a system of rollers and bands to easily clip a light head into the mount. The system is made up of two rollers, one fixed and one moving, joined together by a pair of heavy duty EPDM o-rings, all on a receiver plate. When the striker on the light is pushed against the front, moving roller or the receiver plate, the EPDM rings allow the front roller to move forward. Placing the striker into the channel of the receiver plate, pressing forward against the front roller and releasing, the EPDM rings will retract, securely holding both sides of thestriker under the rollers. To release the light head, simply push forward on the light head. The EPDM rings will stretch, the front roller moves forward, and lift up on the back of the light head. The strikers on the light head will be free from the rollers.   Want more options to mount a light? The QRM system receiver and striker are available for your unique application. Additional QRM receivers give the option to move the light from the handmount to a helmet or DPV mount with ease. Additional QRM strikers can be used on alternate or backup lights for the option of using different lights on the same handmount or receiver.   **Goodman Glove NOT included**

  •  Impact Goodman Handle
    $25.00

    DRIS Dive Gear

    Impact Goodman Handle

    2 Review(s)

    This goodman handle is made of a durable ABS plastic and is custom fitted for the DRIS Impact Light.  Comes with a Soft elastic hand strap, 2- 1" tri-glides, and new, improved attachment point for the light.   Comes with a 5 year no break warranty from DRIS as well!!  

  • Ships FREE Worldwide!

    Guardian Rail System with Sola 800 Dive Light
    $759.00

    OTS

    Guardian Rail System with Sola 800 Dive Light

    GFFM Accessory Rail Light System w/ SOLA 800 SOLA 800We asked divers what they wanted in a dive light. They told us: spot & flood beams, small, lightweight, easy to use, easy to recharge. Introducing the Sola 800; its the lightest, brightest and smallest dive light you have ever seen.Lumens (Flood/Spot):High- 800/500Med- 400/250Low- 200/125Run Time (Flood/Spot): High- 60/70 MinMed- 120/140Low- 240/280Charge Time:150 MinutesSize & Weight: 57mm x 101mm & 305 gr. w/ Wrist StrapReady To GoSola dive lights have a factory sealed body so you never need to worry about flooding. Control is accomplished through a magnetic coupled slider on the top of the body. Slide forward or back to turn on. Hold forward or back to turn off. Three indicator lights behind the bezel report the power (high=3 lights, medium=2 lights, low = 1 light). Indexing back changes mode between spot and flood. Indexing forward increments the power levels.

  • This product has Video Review.

    1000 Lumen Goodman Handle
    $22.00

    DRIS Dive Gear

    1000 Lumen Goodman Handle

    3 Review(s)

    This goodman handle is made of a durable ABS plastic and is custom fitted for the DRIS 1000 Lumen Light.  Comes with a Soft elastic hand strap, 2- 1" tri-glides, and 2 tie wraps to secure your light.   Comes with a 5 year no break warranty from DRIS as well!!   **DRIS 1000 lumen Light sold separately

  • Ships FREE in the USA!

    Goodman Handle with QRM
    $119.00

    Dive Rite

    Goodman Handle with QRM

    Divers who wish to switch from an elastic handmount to a Goodman handmount can choose between Model LT 6120 Goodman with black finish that fits most light heads, both Dive Rite and other manufacturers.   Dive Rite's patent pending Quick Release Mount system changes the world of dive lights and how they are carried.  The Quick Release Mount system is standard on all new Dive Rite lights, and can be retro-fitted to previous models of Dive Rite lights (with the two mounting holes on the bottom of the head).   The QRM uses a system of rollers and bands to easily clip a light head into the mount. The system is made up of two rollers, one fixed and one moving, joined together by a pair of heavy duty EPDM o-rings, all on a receiver plate. When the striker on the light is pushed against the front, moving roller or the receiver plate, the EPDM rings allow the front roller to move forward. Placing the striker into the channel of the receiver plate, pressing forward against the front roller and releasing, the EPDM rings will retract, securely holding both sides of thestriker under the rollers. To release the light head, simply push forward on the light head. The EPDM rings will stretch, the front roller moves forward, and lift up on the back of the light head. The strikers on the light head will be free from the rollers.   Want more options to mount a light? The QRM system receiver and striker are available for your unique application. Additional QRM receivers give the option to move the light from the handmount to a helmet or DPV mount with ease. Additional QRM strikers can be used on alternate or backup lights for the option of using different lights on the same handmount or receiver.

  • This product has Video Review.

    Impact Light Stubby Battery Charger
    $17.99

    DRIS Dive Gear

    Impact Light Stubby Battery Charger

    Keep your DRIS Impact Stubby Dive light batteries charged with this dual battery charger.  The 2-bay battery charger provides an all-in-one charging solution for your Impact Stubby rechargeable batteries. Weighing in at only a half of a pund, the base automatically detects the needs of each battery inserted and determines the correct charge for it. Additionally, it will set the charging mode from constant voltage, constant current, or trickle-charge. Power and charging status LEDs clearly show the progress of each battery.   **Batteries sold seperately**

  • Ships FREE in the USA!

    This product has Video Review.

    Impact Light Spot Light Head
    $84.99

    DRIS Dive Gear

    Impact Light Spot Light Head

    2 Review(s)

    The Impact Spot Light head is great for precise lighting.  Want to see what’s hidden away in the crevices of the quarry you’re in, or look underneath that reef to catch a glimpse of a nurse shark?  Equipping your Impact Stubby Light with the Impact Spot Light head is what you want!  Use this light head with the DRIS Impact Stretch or DRIS Impact Stubby Dive light for a versitle dive light option.   Waterproof to 450 feet Size: 2.5" (6.35cm)  x 2" (5.08cm)  x 2" (5.08cm) Weight: 4 ounces Lamp: CREE XML U2 LED (single) Lumens:1000 11 degree beam angle   **Only for the Impact Stubby and Impact Stretch**

  • This product has Video Review.

    QRM Receiver Assembly
    $29.00

    Dive Rite

    QRM Receiver Assembly

    The QRM uses a system of rollers and bands to easily clip a light head into the mount. The system is made up of two rollers, one fixed and one moving, joined together by a pair of heavy duty EPDM o-rings, all on a receiver plate.   Additional QRM receivers give the option to move the light from the handmount to a helmet or DPV mount with ease.

  • Ships FREE in the USA!

    Fix Neo Spare Battery
    $109.00

    Nauticam

    Fix Neo Spare Battery

    FIX NEO Replacement Battery   3100L Specifications: Capacity: 3100mAh Charging time: about 2 hours Battery Type: Li-Ion   3400L Specifications: Capacity: 3400mAh Charging time: about 2.5 hours Battery Type: Li-Ion

  • Ships FREE in the USA!

    10 Watt HID Bulb
    $100.00

    Light Monkey

    10 Watt HID Bulb

    10 Watt HID Bulb for Monkey Light  Light.

  • This product has Video Review.

    Impact Light Stretch Body
    $49.99

    DRIS Dive Gear

    Impact Light Stretch Body

    1 Review(s)

    Have both an Impact Spot and Impact Video Light Head and want to use them at the same time?  Have an Impact Stubby Dive light and want to add an Impact Stretch to your equipment?  Get yourself a spare light body for the Impact Stretch dive light and you'll have a total interchangable lighting system!.  Be prepared with the right light at all times. You'll never know when an extra light will come in handy.   Waterproof to 450 feet Size: 7" (17.78cm) x 1.5" (3.81cm) x 1.5" (3.81cm) T-6061-T6 Durable Aluminum alloy, anti-corrosive anodized housing Requires 3 C Batteries  (not included)   **Light head sold Separately**

  • Ships FREE Worldwide!

    Heat Controller
    $695.00

    UW Light Dude

    Heat Controller

    Heat Controller Technical Data Cave, wreck, explorers, deep, and extended duration divers have long sought a high quality, durable solution to one of the greatest problems – COLD. Main Features: Constant heat output start to finish of battery Heat does not decrease with battery level Very important for optimal decompression 5 heat levels for a comfort range in water of -3c to 20c (23F° — 68°F ) Piezo switch control for both on/off & changing heat levels Eliminates the high failure rate of boot switches Mechanical switch does not have to be toggled to adjust levels LED indicator for power on/off & heat level setting Can be used independently or with lights on the same battery User switchable between 12v & 7v control Small compact light weight design Compatibility: Works on all UWLD Gen 5 battery packs Comes standard with the stack cap for the Gen 5 battery Stack cap feature allows the controller to be added or removed with ease Can be used with either 12v or 7v undergarments (most common) Has standard E/O connection. Do not plug in a light head to the E/O that comes from the controller Do not mix and match 12v and 7v undergarments The Science: Research has shown optimal decompression occurs when warm The body may be cool on descent, but should be warm on ascent Warm is 36C (96°F) | Cool is 27C (81°F) Being warm at the beginning of the dive increases the uptake of inert gas Being cold at decompression confounds decompression Why UWLD The UWLD controller does not decrease heat at the most crucial time The average “other” controller can only do 75% heat at low battery User Programmable The end user can set the voltage depending the garment choice Double O-Ring Seal LED’s remove guessing heat levels Compatibility with UWLD light systems allowing a streamlined approach with more “bang for your buck.” Battery Burn Time The Controller runs slightly above undergarments rated wattage on high To calculate burn times, UWLD suggest that 110% of wattage be used If a diver has a 60W vest, they should calculateburn time for 66W for the high setting. Each level drops the power consumption by 20% Level 4 would be 53W, level 3 would be 40w, level 2 would be 26.5W and level 1 would be 13W for a 60w vest. With a light, add the light and vest wattage then divide by canisterrating 30W (LD-35) + 60W vest(X 110%)= 96W /160Wh (canister rating) Both on high yields 1.66 hours on a tall canister Light on high, vest on low yields 3.7 hours on a tall canister   Heat Controller Technical Details   One of the biggest issues with current heated systems is the diminishing heat output as battery life dwindles. The UW Light Dude heat controller’s innovative design offers functionality for a wide range of diving that requires heated undergarments and addresses the need for warmth when you need it most – longer duration dives. There are 5 power settings and each setting gives the same heat output regardless of the battery voltage. Research has shown that cooling on the ascent/decompression portion of the dive has a negative affect on decompression. Dr. Neal Pollock, from DAN, has summarized a number of studies that make this point, he has 2 YouTube broadcasts covering this information. Optimal for decompression is to be cool on the descent/bottom portion of the dive and warm on the ascent/decompression part of the dive. Other systems cool off when the voltage drops from the battery canister the heat output also drops. Our 5 heat settings are spaced to give heat output from -3c to 20c (23F° — 68°F ) water. The controller comes standard with a UWLD Stack Cap allowing it to be used as a single on a battery, with the included blanking cap, or with a UWLD light canister cap stacked on top of the stack cap. Our other caps are available as well. The controller has a Piezo switch that has an LED built into the switch. The LED indicator shows power on/off as well as the current heat level. When power is first applied to the unit, the LED will light, indicating to the diver that it is functioning, then will shut off. Power is turned on/off by pressing and holding the Piezo switch. When the unit is turned on, it starts on level 5, the highest level, with the LED staying constantly on. A quick press and release moves to the lowest level which is 1, the LED will flash once, have a delay, then flash once again in a cycle. Each press and release moves the heat up one level with more flashes for each level until reaching level 5 which is again constant on. There is a cord coming from the stack cap to the controller which has a bolt snap to attach it to a shoulder D-ring. There is a second cord coming from the controller with a diving style E/O cord to plug into the divers dry suit heating E/O connection. The controller can’t be used with other manufacturer’s lights that have E/O cords. Plugging a light into our controller will damage the light. We don’t provide E/O for our lights eliminating the possibility of plugging our controller into our lights accidentally. The controller works with both 12v & 7v undergarments. Changing between the two voltages is user programmable. To program them simply apply power to the unit while pressing and holding the Piezo switch. The LED will flash multiple times showing that it is in program mode, then will either have a constant lit LED if set at 12v (setting from the factory) or off if set at 7v. Press and release the Piezo to cycle between either 12 or 7v then press and hold to exit program mode. The LED will again flash multiple times to show that it has accepted the new setting and exited program mode. The controller will now function normally at whichever voltage was chosen. Mixing different voltage undergarments, such as having a 12v vest and 7v gloves, will not function properly and could cause damage to the undergarments or the diver. The most common voltage for battery packs from other manufacturers is 11.1v Li-ION. With a 12v vest the best these packs performance will give heat output of 90% at a full charge. The end of their output will only produce 75% heat output. Our controller gives just above the rated wattage of the undergarment on the highest setting regardless of battery charge condition & maintains constant heat  on any of the 5 settings. The controller retails for $695 without a battery pack and can be used on our gen 5 canisters.

  • HOG 90 Degree Umbilical Adapter
    $34.95

    HOG Gear

    HOG 90 Degree Umbilical Adapter

    Used within the HOG Morph Core System - Spot and Morph Core System - Video, the HOG 90 Degree Umbilical Adapter allows for alternative hose routing and canister placement for specialty applications such as side mount diving.

  • Ships FREE Worldwide!

    Guardian Rail System with Sola 1200 Dive Light
    $729.00

    OTS

    Guardian Rail System with Sola 1200 Dive Light

    GFFM Accessory Rail Light System w/ SOLA 1200 SOLA 1200We asked divers what they wanted in a dive light. They told us: spot & flood beams, small, lightweight, easy to use, easy to recharge. Introducing the Sola 1200; its the lightest, brightest and smallest dive light you have ever seen.Lumens (Flood/Spot):High- 1200/500Med- 600/250Low- 300/125Run Time (Flood/Spot): High- 70 minsMed- 140 minsLow- 280 minsCharge Time:2.5 hoursSize & Weight: 2" x 2.1" x 2.1"254 gr. w/ Wrist StrapReady To GoSola dive lights have a factory sealed body so you never need to worry about flooding. Control is accomplished through a magnetic coupled slider on the top of the body. Slide forward or back to turn on. Hold forward or back to turn off. Three indicator lights behind the bezel report the power (high=3 lights, medium=2 lights, low = 1 light). Indexing back changes mode between spot and flood. Indexing forward increments the power levels.  

  • This product has Video Review.

    Impact Light Stubby Battery
    $17.99

    DRIS Dive Gear

    Impact Light Stubby Battery

    This battery powers the DRIS Stubby Dive light.  Keep an extra battery with you to have the peace of mind knowing you can dive with constant light.  Two DRIS Impact Rechargeable Batteries can charge at the same time in the DRIS Impact Battery Charger!   Model: LC 26650 Voltage: 3.7V Capacity: 6000 mAh Rechargeable Li-ion battery Dimensions: 65mm*26mm 2 hour burn time at max brightness and a run time of 4 hours of usable light with Impact Stubby Light   **Charger sold separately**

  • This product has Video Review.

    1k Shorty Goodman Handle
    $22.00

    DRIS Dive Gear

    1k Shorty Goodman Handle

    11 Review(s)

    This goodman handle is made of a durable ABS plastic and is custom fitted for the DRIS 1k Shorty Light.  Comes with a Soft elastic hand strap, 2- 1" tri-glides, and 2 tie wraps to secure your light.   Comes with a 5 year no break warranty from DRIS as well!!   **DRIS 1k Shorty light sold separately

  • Sola Ball Mount Kit
    $19.99

    Light and Motion

    Sola Ball Mount Kit

    This allows you to mount your dive light on your SLR rig for use with Ultralight ball and clamp arms.

  • This product has Video Review.

    Impact Light Stubby Body
    $49.99

    DRIS Dive Gear

    Impact Light Stubby Body

    1 Review(s)

    Have both an Impact Spot and Impact Video Light Head and want to use them at the same time?  Have an Impact Stretch Dive light and want to add an Impact Stubby to your equipment?  Get yourself a spare light body for the Impact Stubby dive light along with the Impact Stubby battery and charger and you'll have a total interchangable lighting system!.  Be prepared with the right light at all times with this interchangeable lighting system. You'll never know when an extra light will come in handy.   -Waterproof to 450 feet-Size: 4" (10.16cm) x1.5" (3.81cm) x 1.65" (3.81cm)-T-6061-T6 Durable Aluminum alloy, anti-corrosive anodized housing   **Battery and Light Head sold separately**

  • Impact Loc line Mount
    $22.00

    DRIS Dive Gear

    Impact Loc line Mount

    1 Review(s)

    Use this mount with your DRIS Impact Stubby or DRIS Impact Stretch!! Lockline mount attaches into Lockline system to allow you to utilize your Impact dive lights hands free, ensuring you get the right lighting for your photos or video.   Features: Stainless Steel Hardware Lightweight Dimensions: 2 3/4" x 2 1/2" x 1"   **Lockline Not Included**

  • Ships FREE in the USA!

    This product has Video Review.

    Impact Light Video Light Head
    $84.99

    DRIS Dive Gear

    Impact Light Video Light Head

    3 Review(s)

    For the seasoned, or aspiring underwater photographer, the Impact Video Light Head is what you’re looking for! With a wide angle beam, this light head will flood the water with light so that you get the best shot available.  The Impact Video Light Head is also great for large area illumination whether you have a camera with you or not.  Use this light head with the DRIS Impact Stretch or DRIS Impact Stubby Dive light for a versitle dive light option.   Waterproof to 450 feet Size: 2.5" (6.35cm)  x 2" (5.08cm)  x 2" (5.08cm) Weight: 4 ounces Lamp: CREE XML U2 LED (single) Lumens:1000 140 degree beam angle   **Only for the Impact Stubby and Impact Stretch**

  • Soft Neoprene Goodman Handle
    $20.00

    DRIS Dive Gear

    Soft Neoprene Goodman Handle

    12 Review(s)

    Super soft neoprene gives this Soft Goodman Handle a really versatile size range.  Almost every dive light out there works due to the stretchy light compartment.  Velcro helps this to attach around your wrist and your palm, holding your light tight while keeping your hands free to work underwater or still use your fingers for diving tasks.

  • Ships FREE in the USA!

    GoBe Photo Kit
    $179.99

    Light and Motion

    GoBe Photo Kit

    Featuring a 2.2 Ah GoBe handle & the 500 Spot & Red Focus light heads for diverse camera lighting needs. The Focus light head delivers a smooth 60° beam of red light to discreetly focus on subjects without scaring them away. The 500 Spot offers an excellent 20° beam to illuminate subjects. Included imaging mounts make it quick and easy to connect to just about any camera setup with a loc-line or ball mount. GoBe 500 Spot Light Red Focus light head Imaging Mounts GoBe 500 Spot Light Details: Lumens:  High- 500, Med- 255, Low- 70, Ext- 35, SOS- 70 Run Time (Hrs):  High- 1.5, Med- 3, Low- 12, Ext- 24, SOS- 36 Size and Weight:  45mm x 122mm - 160 gr

  • Goodman Handle
    $65.00

    Sartek Industries

    Goodman Handle

    Goodman style handle fit HID10, LED6600, LED1000 lightheads.  Comes with both soft and rigid handles.  Lightheads easily snap and out of the clip for easier use. 

  • Ships FREE in the USA!

    HOG Morph Spot Light Head
    $99.95

    HOG Gear

    HOG Morph Spot Light Head

    1 Review(s)

      Created for the Morph Core System, the HOG Morph Spot Light Head gives an 8 degree beam up to 1000 lumen.  The Morph Spot Light Head can be switched between the Morph Core System and Morph Backup Light. Spot Light Head can be used with the following products: Morph Core System Morph Backup LIght

 
 

Set Ascending Direction

26 Item(s)

per page