815 267 8400

ALL SCUBA GEAR

Scuba accessories


From backplates and pads, to clips and snaps, to lights and other accessories built with the needs of technical divers in mind, you’ll find just what you need here. We have the best scuba accessories that will help you experience the finest dive possible. Check out our packages for some great deals on tech equipment.

Set Ascending Direction

Items 1 to 32 of 1963 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  • Now On Sale

    This product has Video Review.

    Argon System w/ Tank

    Was: $269.99

    On Sale: $199.99

    DRIS Dive Gear

    Argon System w/ Tank

    3 Review(s)

    This Complete Argon System comes with: Dive Rite Argon Inlation Regulator DIN cap to protect the first stage threads 6 cu/ft Argon Bottle w/ 200 BAR Convertible Valve and VIP Sticker 22" Miflex QD Hose

  • Now On Sale

    USED - Aga Full Face Mask (Non-positive pressure)

    Was: $865.00

    On Sale: $600.00

    OTS

    USED - Aga Full Face Mask (Non-positive pressure)

    USED - OTS Aga Mask Non-positive pressure - Only One Available!!- Black Skirt ONLY Fully rebuilt in shop with 6 year kits   Non-Positive Pressure Totally eliminates jaw fatigue Advanced air circulation prevents mask fogging Breathe comfortably and naturally through both your nose and mouth Mask flooding is almost eliminated Diver communications option available Integrated high performance 2nd stage Regulator has side exhaust for less bubble interference Works with most 1st stage regulators Requires the AGA Supply Hose (Not included), mask will not work with a standard regulator hose Optional AGA Hose Swivel converts regulator to use a standard regulator hose (Not included)

  • Now On Sale

    Dry Bag w/ Mat

    Was: $153.99

    On Sale: $129.99

    Seasoft

    Dry Bag w/ Mat

    1 Review(s)

    SEASOFT designers and testers are practical people who know a need when they see one. When they finish a dive they have a whole bunch of wet, salty, dripping dive equipment covered with sand and other debris. If they put their gear into one of the bags typically sold in most dive stores (designed for travel, not diving), they can expect it to leak the same wet, salty water all over their back seat or trunk. Introducing the new water-resistant SEASOFT DRYBAG™! A radio frequency welded (RFW) dry bag that holds all your gear: drysuit, BC, fins, mask, reg. set, snorkel, boots, gloves, hood, lights, repair kit, knife, back-up gear and more. When you finish a dive you avoid getting sand, dirt, rocks and other junk on your suit and other gear by unrolling the large mat from the side of the bag (it’s permanently attached) and standing on it as you remove your equipment. Place your gear in the bag, zip it up, roll up the mat and you are on your way. The gear and water stay contained in the SEASOFT DRYBAG™ until you get to where you can clean and dry your gear. The SEASOFT DRYBAG™, your solution to a big, wet mess!

  • Ships FREE in the USA!

    This product has Video Review.

    F1 Tech Fin
    $159.95

    Hollis

    F1 Tech Fin

    55 Review(s)

    Power without compromise. The Hollis fin blends graceful movement, power, and bulletproof construction. Meet the new standard in diving. High grade, heavy duty rubber construction Angled strap mounts for comfort and a better transition of power Spring heel straps w/ easy-grip heel tab Multiple strap mounting positions for a fine tuned fit Vented blade to reduce stress while accelerating water over the blade Generous foot pocket Large: 7-9 XL: 10-12 XXL: 13-15      

  • Ships FREE in the USA!

    Womens Arctic Package
    $339.80

    Fourth Element

    Womens Arctic Package

    3 Review(s)

    This Arctic Package includes the Arctic Top, Bottom,optional  Socks, and bag. EXTREME PERFORMANCE The Arctic is one of the highest performance undersuits in scuba diving. Constructed using a unique combination of low volume, high insulation materials, the Xerotherm Arctic’s two layer structure creates a microclimate next to the skin, maximising the retention of body warmth during a dive. Using high density fleece, the Xerotherm Arctic holds air next to the skin and wicks away moisture from suit leaks or perspiration to maintain a dry zone next to the skin. The outer layer is high stretch, abrasion resistant material, which will not interfere with the operation of auto dump valves, and will not cause air to be trapped. FUNCTION The Arctic will also continue to perform when wet. In situations even when a drysuit has flooded, the Arctic continues to provide thermal protection. The suit is designed to maximise fit and performance, giving snug protection to the body, including the feet. The Arctic is fully machine washable VERSATILITY Suitable for wearing underneath neoprene or membrane drysuits, the Arctic, can be used in conjunction with the Xerotherm base layer to provide extra protection for the most extreme diving conditions. (link to layering system page)   Fourth Element’s drybase and Xerotherm products are designed to be used in concert with each other in a layering system. This enables selection of a thermal protection which is appropriate to a wearer’s drysuit and the environmental conditions.

  • Ships FREE in the USA!

    This product has Video Review.

    1000 Lumen Dive Light
    $75.00

    DRIS Dive Gear

    1000 Lumen Dive Light

    172 Review(s)

      !!!30-DAY UNCONDITIONAL WARRANTY!!! Face it, you need a tough and bright dive light...and plastic just won't do. So, reach for the 1000 Lumen Dive Light! Built on the same powerhouse platform as our popular 500 Lumen Dive Light(8" long with a 1.5" diameter head), this thing boasts an upgraded driver to pump out a beam for up to 5 hours that will cut through even the murkiest of waters!     Featuring a 5mm glass lens, XML T6 aluminum body, a double O-ring twist on/off activation, and the ability to be used above the surface...go ahead, put it through its paces on the toughest of dives. It will surely be up for the job.  Features:  Twist on/off switch Super big laynyar hole for bolt snap mount Alloy aluminum reflector Burn time: 7 hours Beam angle: 11 degrees.  Distance: 320m Drop Resistant:1.5m Waterproof: 150m   Dimensions: Head diameter: 46mm Body diameter: 34mm Tail diameter: 35mm Length: 210mm Weight: 285 g   The 1000 Lumen Dive Light comes complete with 3-C Cell batteries, lanyard, and O-rings.       

  • Faber Hot Dip Galvanized HP117 Steel Tank
    $359.95

    Faber

    Faber Hot Dip Galvanized HP117 Steel Tank

    4 Review(s)

      Built in Italy by Faber Cylinders with 40 years of experience Oxygen cleaned for use with up to 40% pre-blended Nitrox DOT Special Permit #13488 and Transport Cnada #SU7694-237 approved Exclusive Phosphatized-cleaned internal surface Hot dip galvanized silver finish Manufactured usin the deep draw process with Chromium Molybdenum steel Includes XS Scuba Pro Valve with safety handwheel High quality, injection-molded custom tank boot with round rim 3442 psi working pressure   Includes XS Scuba PVD PRO Valve Premium valve from XS Scuba Our same PRO valve with an exclusive black Mil-Spec finish Increased resistance to salt water corrosion and scratching Removable Spin-Out DIN insert Included Safety Handwheel Hot-dip Galvanizing offers the highest level of protection against corrosion and unparalleled protection for SCUBA Cylinders. However, they do come with a caveat. Cylinders that have been finished with the Hot-dipped galvanizing process often result in small blemishes and variations in color that is not as smooth as a painted finish. Over time, these blemishes will settle into a semi-uniform, silver, “mottled” appearance.  Please understand and take this into account when making your cylinder selection.   Specifications: In Sea Water with Valve:    HP117 Service Pressure: 3442 psi Buoyancy *Full: - 9.12 lbs Buoyancy * Empty: 0.16 lbs Weight Empty: 37.6 lbs Outside Diameter: 8.00" Length: 24.2"' REE: 100c  

  • This product has Video Review.

    MiFlex Hoses- Low Pressure Regulator hose
    $35.95

    XS Scuba

    MiFlex Hoses- Low Pressure Regulator hose

    56 Review(s)

    Extreme Abrasion Resistance MIFLEX regulator hoses feature an external nylon safety braiding designed to outperform and outlive traditional rubber hoses Patent-pending MIFLEX double braiding design Polyurethane compound liner Polyester inner layer with nylon outer layer braiding Fittings and sleeves of UNI EN12164 CW 614N chrome plated brass MIFLEX braided hoses are tightly bound and fixed to the hose core by brass sleeves Double braiding also resists UV rays out of the water, extending the life span of the hose Oxygen cleaned and tested at the factory Lightweight and Flexible More than 30% lighter in weight when compared to rubber hoses of the same length Kink-resistant design Tie an MIFLEX hose into a tight knot and the flow of air remains continuous through the hose Manufacturing Made in Italy Minimum burst pressure exceeding 250 BAR (over 3600 psi) more than twice that of most rubber hoses Automated assembly and testing lines designed and manufactured exclusively for MIFLEX Each and every MIFLEX hose is subjected to more than 30 individual performance and safety tests Certified and tested to EN250 Standard Fitting have 5.2 mm internal bore Hose diameter – External 12 mm, Internal 6.5mm Premium packaging doubles as a water-resistant document wallet   Color and Length Availability Color Available Lengths in Inches Black: All Lengths Available Blue: 26", 30", 36", 40", 84" Carbon: 30" Pink: 30" Purple: 30" Red: 30" White: 30" Hi-Vis Yellow: 30", 36", 40", 84" Mellow Yellow: 36", 40" Green: 40"

  • Now On Sale

    This product has Video Review.

    Silicone Wrist Seals

    Was: $42.95

    On Sale: $34.36

    Si Tech

    Silicone Wrist Seals

    62 Review(s)

    These one size fit most wrist seals are AMAZING!!!  Black silicon, never needs to be trimmed, and extremely comfortable.  You will need a wrist system, Oval Permanent Wrist System, or Round Permanent Wrist System,  to attach these to your suit.  They WILL NOT hold with any glue.  See the above video for the wrist system we sell.  You can add it yourself or send your suit to us and we can install it for you. See all of our Services HERE!!  The nice thing about having such a system installed is that you will never need to pay for wrist seal installation again.  You can quickly change out your wrist seals yourself.  No more worries about a ruined dive trip due to a blown seal! Sold as a pair   Standard Size Wrist circumference 13.2-17 cm (5.2-6.9")* Small Size Wrist circumference 10.6-15 cm (4.2-5.9") Even though silicone seals are better in many way than regular latex seals they still must be handled with care.   Please handle them with care. Overstretching, sharp objects and poor trimming can cause your seal to tear.   Even if the silicone seals have more stretch than latex seals, do not stretch the seal more than required. Assist yourself with a free hand when pulling the seals over your head or hands - both for the seal and your comfort.   Avoid contact with sharp objects, like finger nails or rings, when handling seals.   Use a product such as talcum, on a regular basis to minimize frictional strain on the seal and for personal comfort.   When trimming seals, use sharp scissors. Cut edges should be as smooth and straight as possible. Do not trim across trim lines. Avoid sharp edges. **We do not warranty this item if you go to extreme lengths to stretch this seal.  You CAN rip this if you try.  Only use this as you would with your normal latex seals.  Do not attempt to stretch this beyond those latex capabilities as it will not be covered if you rip them**

  • Now On Sale

    This product has Video Review.

    Silicone Neck Seals

    Was: $59.99

    On Sale: $48.00

    Si Tech

    Silicone Neck Seals

    39 Review(s)

      These one size fit most neck seals are AMAZING!!!  Black silicon, never needs to be trimmed, and extremely comfortable.  You will need a neck system to attach these to your suit.  They WILL NOT hold with any glue.  See the below video for the neck system we sell.  You can add it yourself or send your suit to us and we can install it for you.  The nice thing about having such a system installed is that you will never need to pay for a neck seal installation again.  You can quickly change out your neck seal yourself.  No more worries about a ruined dive trip due to a blown seal!    Check out our Drysuit Services and Prices HERE!! Even though silicone seals are better in many way than regular latex seals they still must be handled with care.   Please handle them with care. Overstretching, sharp objects and poor trimming can cause your seal to tear.   Even if the silicone seals have more stretch than latex seals, do not stretch the seal more than required. Assist yourself with a free hand when pulling the seals over your head or hands - both for the seal and your comfort.   Avoid contact with sharp objects, like finger nails or rings, when handling seals.   Use a product such as talcum, on a regular basis to minimize frictional strain on the seal and for personal comfort.   When trimming seals, use sharp scissors. Cut edges should be as smooth and straight as possible. Do not trim across trim lines. Avoid sharp edges. **We do not warranty this item if you go to extreme lengths to stretch this seal.  You CAN rip this if you try.  Only use this as you would with your normal latex seals.  Do not attempt to stretch this beyond those latex capabilities as it will not be covered if you rip them**           

  • Double Braided Kevlar High Pressure Hoses
    $20.99

    DRIS Dive Gear

    Double Braided Kevlar High Pressure Hoses

    40 Review(s)

     This hose is made of an outer polyester braided cover that is overlaid with a woven Kevlar.  The Kevlar makes this hose much more durable than the low pressure variant, but also a little less flexible. Rated and tested to 5000psi with a burst pressure of 22000psi, it is going to hold for you even if you tie it in a knot! The 7/16" chrome plated brass HP fittings screw into either your first stage or pressure gauge with no issues and a perfect mate.  These do NOT come with a High Pressure spool that is required for it to work.  The gauge you buy should come with the appropriate spool to use with this hose.   Tie it in a Knot, and it STILL works!!!

  • Double Braided Low Pressure Hoses
    $16.95

    DRIS Dive Gear

    Double Braided Low Pressure Hoses

    56 Review(s)

    These hoses are tested to 1500PSI and have a minimum burst pressure of 6000psi which is well above the pressure that will go thru it for your regulator.  These work with all breathing gases and have are made with a TPU/ Nylon/Polyester blend.   CE EN250 rated with chrome plated brass fittings for a durable and strong connection.  Available in multiple sizes and colors in the dropdown box below.  

  • Ships FREE Worldwide!

    Elite II Backplate and Wing Package
    $649.95

    Hollis

    Elite II Backplate and Wing Package

    6 Review(s)

    This Hollis Backplate and Wing package comes with everything you need to get started! Aluminum backplate for travel, yet durable setup. Upgradeable to Stainless if you need more weight Elite II Adjustable harness that makes this harness simple to get in and out of. Your choice of either the S25 or  S38 2 Stainless Steel Cambands to secure your tanks to your new rig Backplate pad to ease the comfort and finish off the look of your Hollis Backplate and Wing Hollis Mesh Duffel Bag          

  • Quick Drop Weight Pocket
    $34.95

    HOG Gear

    Quick Drop Weight Pocket

    5 Review(s)

      Ditch the antiquated weight belt and carry your weight easily and safely with these pockets from HOG Gear. Featuring a tough nylon construction and quick dump capabilities, these weight pouches will be a welcome addition to your dive harness. Available in two sizes, 5lb and 10lb per pocket and sold in pairs. Grab a pair today and keep the weight belt in your dive bag!   Harness Small Quick Drop Weight Pocket Pair-Up to 5lbs Per Pocket Harness Large Quick Drop Weight Pocket Pair-Up to 10lbs Per Pocket

  • Ships FREE Worldwide!

    MOD-1 Mask with optional Pod
    $699.95

    Hollis

    MOD-1 Mask with optional Pod

    Used by United States Marines Combat Divers around the world, Professional Underwater Videography Teams and Scientific Dive Teams, the Kirby Morgan Modular Full-Face Mask represents a giant step-up in safety, versatility and convenience over conventional Full-Face Masks (FFMs). Known simply as the “MOD-1”, the patented Kirby Morgan two-chamber (Mask & POD) design opens up multiple configuration possibilities with both Open Circuit and Closed Circuit Rebreather systems never before available. Hollis is excited to partner with Kirby Morgan Dive Systems, Inc, the designer of commercial and military diving systems, to bring our divers a product, the MOD-1 with optional Hollis BOV Pod, expanding the possibilities in diving safety, reliability and versatility. (Pictured with the optional Hollis BOV Pod.)   The MOD-1 utilizes two separately sealed cavities in a single FFM design. The Mask which acts exactly like an independently sealed dive mask, and a lower Breathing Pod which contains the mouthpiece; which can be used in Pod recovery and gas sharing emergencies, a dewatering one way valve and a hook and catch, release for sealing and releasing the Pod to the Mask. Wireless or hardwired communications can be installed into the Mask and when communicating with other divers underwater or topside, the diver can simply talk normally as the microphone rests nearby the mouth. At the surface, with the Pod removed from the mask, communication is very clear as there is no need to talk through a mask to your buddy or topside support crew. Switching gasses underwater or bailing out to an off-board system in the case of Rebreather use with the Hollis BOV Pod, is simple and straightforward because of the MOD-1's two chamber. The diver simply detaches the lower Breathing Pod and secures either a secondary Open Circuit Pod, or simply a second stage without a Pod attached. The Mask does not flood during this exchange, or when breathing off a second stage with no Pod attached! This dramatically increases safety and versatility over conventional one-piece designs where a bailout means momentarily losing breathing gas and the ability to see underwater. With the Hollis BOV Pod, bailing out to Open Circuit requires only flipping the CC/OC lever to Open Circuit mode. You do not lose critical time, communications or visibility, and you don’t need to grab a bailout mask. Because the MOD-1 utilizes glass lenses instead of plastic, you can install custom-ground prescription lenses, a critical feature for underwater videographers and photographers to get that perfect shot, in perfect focus. For Hollis Prism 2 and Explorer divers, the MOD-1 with Hollis BOV Pod has several important safety considerations, which cannot be understated. First and foremost, should a diver become unresponsive underwater, their airway is protected while a buddy switches the BOV to Open Circuit mode and starts the flow of a “known” gas. Secondly, if added, voice communications between dive teams means rebreather divers can alert team members to a potential issue, have more than one brain available to discuss solutions, and make the critical go/no-go decisions that will insure a safe return to the surface.

  • Faber Stealth HP100 Steel Tank
    $319.95

    Faber

    Faber Stealth HP100 Steel Tank

    10 Review(s)

    Built in Italy by Faber Cylinders with 40 years of experience Oxygen cleaned for use with up to 40% pre-blended Nitrox DOT Special Permit #13488 and Transport Cnada #SU7694-237 approved Exclusive Phosphatized-cleaned internal surface Triple-protected zinc spray plus epoxy and polyurethane painted finish for long lasting durability Manufactured usin the deep draw process with Chromium Molybdenum steel Includes XS Scuba Pro Valve with safety handwheel High quality, injection-molded custom tank boot with round rim 3442 psi working pressure   Includes XS Scuba PVD PRO Valve Premium valve from XS Scuba Our same PRO valve with an exclusive black Mil-Spec finish Increased resistance to salt water corrosion and scratching Removable Spin-Out DIN insert Included Safety Handwheel   Specifications: In Sea Water with Valve:    HP100 Service Pressure: 3442 psi Buoyancy *Full: - 8.41 lbs Buoyancy * Empty: - 0.59 lbs Weight Empty: 34.0 lbs Outside Diameter: 7.25" Length: 25.3'' REE: 86cc

  • Ships FREE in the USA!

    Full Face Snorkeling Package
    $99.99

    DRIS Dive Gear

    Full Face Snorkeling Package

    See the rest of the planet with our full face mask snorkeling set. Glide easily over the beautiful blue reef with a panoramic view provided by the wide angle and easy breathing ability of the full face mask. Navigate the waters efficiently with the wide blade light fins. This set comes in three colors to suit your personal style...be the envy of the water with this snorkeling set up! TIPS: How to choose the right mask size?Step 1. Measure the distance between Nose bridge to bottom of the chin. Step 2. If the distance is less than 12 cms or 4.7 inches, Choose Small/Medium Step 3. If the distance is more than 12 cms or 4.7 inches, Choose Large/XL. **This mask is not designed for Free Diving or Spear Fishing. **GoPro camera or the water proof housing is not included with the purchase** Treck Fin: Compact fin, great for travel Quad Flex Rail system channels water and provides excellent snap Soft, flexible foot pocket for great comfort Adjustable foot strap to fine tune fit 

  • Now On Sale

    This product has Video Review.

    Closeout Fusion Fit Drysuit

    Was: $1,999.00

    On Sale: $1,000.00

    Aqualung

    Closeout Fusion Fit Drysuit

     Fusion FIT is the first Fusion to use a skin specifically designed to fit women properly. Anatomically correct panels constructed out of super stretch neoprene ensure maximum streamlining and mobility. Gator tech armour on the knees and reinforced seams ensure maximum durability. FEATURES: - Anatomically correct construction. - Super stretch neoprene provides excellent mobility and streamlining. - Gator Tech neoprene provides excellent protection to the knees. - Seams are mauser taped and 6 thread sewn for maximum stretch and durability.    

  • Ships FREE in the USA!

    SLT - Replaceable Wrist and Neck system
    $250.00

    Aqua Lung

    SLT - Replaceable Wrist and Neck system

    1 Review(s)

    Replaceable Wrist and Neck system: Oval Wrist System: Like a more compact system, but still want to have the option to change out your seals?  This Oval Permanent Wrist System by Si Tech solves your problems!  It keeps the wrist area compact for reaching your valves or other items.  You can also use drygloves with it.  This rings dimensions are: Major axis 3 3/4", minor axis 2 1/8".  We recommend cutting a template out of paper or cardboard to see if your hand fits.  Those with bigger hands, might not be able to use this system.  Please check before purchasing if you think you have big hands.   **This wrist system works by itself or with the Antares Dryglove System. You can install this item yourself with our Dry Adhesive tape, or Drysuit Glue or see our labor prices here Neck Tite System: The Neck ring is a flexible polyurethane material. Neck tite tool has a small notch molded in to the wheel to make removal of the inner yellow seal ring a little easier.   Features: Ables the diver to change seals at the dive site Ables the use of either silicone or latex seals Prevents costly and time consuming repairs Make drysuits versatile in terms of user/sizes

  • Ships FREE in the USA!

    Sub Frame Mask
    $114.95

    Atomic Aquatics

    Sub Frame Mask

    14 Review(s)

    The Atomic Ultra clear Sub Frame mask is the strongest and most indestructible two window mask ever made. The Atomic Ultra clear Sub Frame mask is a two window design built with an innovative patent pending three piece frame structure. This structure provides unparalleled durability and strength. In fact, the Atomic Sub Frame is so durable that Atomic offers a LIFETIME WARRANTY against frame breakage. To add even more rigidity and strength to the frame structure, Atomic engineers designed into the frame a solid 316 stainless steel Lens retainer support section around the nose bridge. This makes this the Atomic Ultra clear Sub Frame mask incredibly rigid in the normally weak area of a two window mask design. The support is not just a metal accent, but a purposefully designed structural support to keep the lenses flat and parallel to the viewing plane. The Atomic Ultra clear Sub Frame mask offers a new standard feature never seen or seen before on a diving mask. They call them ULTRACLEAR lenses. What makes ULTRACLEAR special? Did you ever notice that normal dive mask lenses have green tint to the glass? To see this tint put you’re existing mask up to a piece of white paper and see for yourself. The green tint you see is the result of iron impurities left over in lower quality glass. That green tint distorts true colors and blocks out some of the light that reaches the eye. The Ultraclear glass in the Atomic Ultra clear Sub Frame mask is a new and exciting optical quality glass with exceptional clarity and high light transmission, with no color distortion. As with most things in life there is some care for your new mask, you will need to clean off the inside of the lens before you can dive it!

  • Ships FREE Worldwide!

    This product has Video Review.

    Neptune Space G.divers Integrated Mask
    $650.00

    Ocean Reef

    Neptune Space G.divers Integrated Mask

    Neptune Space G.divers INTEGRATED DIVING MASK   The Neptune Space G.divers Integrated Diving Mask is available in 2 sizes and 4 color options (emerald,cobalt, white and pink) and includes an integrated balanced 2nd stage regulator and low pressurehose. The patented bellows style face seal, molded from premium grade silicone rubber, uses a "spring profile" and large sealing surface, double the size of conventional masks (30-45mm), to achieve a very comfortable fit and ample support. This "spring" effect is a combination of the double "S" section and the inner support ribs which allows the G.divers Integrated Diving Mask to "float" comfortably on the face. The head strap is directly attached to the face shield, allowing pressure to be distributed equally along the face seal. The six straps of the head harness hold the mask in a firm position due to their low elasticity. The tip of each strap (rubber) is wider, making them easier to grasp while wearing neoprene gloves. The FRB II (fast rotating buckle) allows the mask to be donned and doffed quickly. These unique face seal and strap concepts are OCEAN REEF patents.   Features:   G.DIVERS EXHAUST SYSTEM The Neptune Space air circulation system is one of a kind and is designed to eliminate fogging and reduce the amount of CO and CO2 buildup. The silicone orinasal pocket is built with 2 one-way valves through which air is inhaled. Exhaled air is directed through a valve under the orinasal pocket. This limits the mixing of used air (which contains high amounts of CO2) with the fresh air breathed from the regulator, allowing for a much safer dive and reduces the risk of breathing harmful gas buildups.   MOST EFFICIENT BREATHING The Neptune Space G.divers may be equipped  with a surface air valve (SAV) that allows the diver to breathe ambient air while at the surface. The SAV may be easily assembled on the octopus/SAV port . Each SAV comes with 4 colored silicone rings to match the mask color. The G.divers SAV/octopus port makes installation of either a Surface Air Valve accessory or Octopus Adapter very easy. COMFORT MEETS EASE OF USE Equalization can also be a common issue for some divers. The G.divers Integrated Diving Masks makes clearing a breeze with the patented OCEAN REEF 3-D equalization system. The system consists of a movable plate and 2 eccentric blocks (these blocks move close to the nostrils when the upper part of the visor is pressed). Before donning the mask, the blocks may be moved up or down depending on the length of the diver’s nose. The 3-D equalization system can be adjusted for wide and narrow noses(3, 6, 10 and 14 mm extentions available on request) allowing the distance between the blocks and the nose to be modified to accommodate any diver’s nose structure. The 3-D equalization system makes diving far more comfortable and inhibits any undesired pressure during a dive. SEE CLEARLY Water that may seep into the mask is easily eliminated by exhaling or pushing the “purge” button on the second stage. Mask squeeze, a common problem for conventional masks, will not occur with the G.divers Integrated Diving Mask because the pressure inside the mask is equal to the pressure outside the mask. The dry air flowing over the visor from your regulator keeps the G.divers Integrated Diving Mask free from fogging.

  • Ships FREE Worldwide!

    This product has Video Review.

    O2ptima Rebreather w/ SW

    MSRP: $0.00

    $8,500.00

    Dive Rite

    O2ptima Rebreather w/ SW

    1 Review(s)

    The O2ptima is a fully closed circuit, constant PO2, electronically-driven rebreather with built-in decompression ability. Unique in the rebreather marketplace, the O2ptima is specifically designed for the rigors of cave diving where immediate surfacing is not possible. The resulting features are also highly desirable for wreck and deep ocean divers. The O2ptima's design includes minimal risk of a caustic cocktail. Two water traps in the loop along with horizontal, behind-the-head positioning of the scrubber canister create a difficult path for water to travel. An even greater advantage is gained by using Micropore Extend Air scrubber cartridges, which do not contain dust. It is the dust that reacts quickly with water to form a caustic cocktail. The O2ptima delivers excellent work-of-breathing that allows divers faced with strong flow or ripping current to breathe comfortably. Over-the-shoulder counterlungs along with the scrubber positioned behind the head means gas has less distance to travel, so the diver does not have to work as hard to "pull" gas through the loop. This also allows the O2ptima to have smaller diameter loop hoses, which minimizes jaw fatigue. A stainless steel frame and Rhinotec 600-denier polyester cover protects the O2ptima from tight cave squeezes and rolling boats. Hoses, regulators and tanks are kept neatly streamlined and away from potential snags inside a wreck or cave.   The O2ptima comes standard with the following features (see tech specs for details):   Over-the-shoulder counterlungs Shearwater Divecan - Petrel controller Shearwater Divecan Heads Up Display (HUD) Dive Surface Valve (DSV) Automatic Diluent Valve (ADV) Water traps XT Regulators and hoses AI R22 Oxygen Sensors Choice of Dive Rite harness CCR XT wing   Tech Specs:   COUNTERLUNGS: Over-the-shoulder 2.5L counterlungs, 5 liter total loop volume provide easier work of breathing in all dive positions. Counterlungs include diluent and oxygen manual addition valves. An over pressurization drain valve is located on the exhalation counterlung. The O2ptima counterlungs are covered in tear-resistant Rhinotec. ( 6 liter set available on request) ELECTRONICS: Powered by Shearwater Research, using the latest in Shearwater technology the DiveCan system. The oxygen injection has an independent control board and long lasting 9 volt battery with a detachable Petrel controller. BACK UP ELECTRONICS: Powered by Shearwater Research, using the DiveCan Heads Up Display (HUD). This unit has its own control board and long lasting 1.5 volt power supply, all contained in its own seperate housing. The HUD has seperate LED's for each oxygen cell, color blind mode and red buddy warning light. OXYGEN SENSOR MONITORING: The system utilizes 4 oxygen sensors, sensors 1 & 2 are shered by the Primary and Backup systems while the third cell on each are independent for maximum redundancy. DSV: Dive surface valve utilizes a friction seal so there are no o-rings to wear out and replace on the barrel. ADV: Automatic diluent valve adds diluent to loop automatically maintaining a breathable volume. Located on the inhalation counterlung, the ADV includes an in-line shutoff in case of free flow. BACK UP ELECTRONICS: Powered by Shearwater Research, using the DiveCan Heads Up Display (HUD). This unit has its own control board and long lasting 1.5 volt power supply, all contained in its own seperate housing. The HUD has seperate LED's for each oxygen cell, color blind mode and red buddy warning light. OXYGEN SENSOR MONITORING: The system utilizes 4 oxygen sensors, sensors 1 & 2 are shered by the Primary and Backup systems while the third cell on each are independent for maximum redundancy. DSV: Dive surface valve utilizes a friction seal so there are no o-rings to wear out and replace on the barrel. ADV: Automatic diluent valve adds diluent to loop automatically maintaining a breathable volume. Located on the inhalation counterlung, the ADV includes an in-line shutoff in case of free flow. WATER TRAPS: Dual water traps, one in the canister and one in the T-piece on the exhalation counter lung minimizes possible water interaction with the scrubber cartridge. REGULATORS & HOSES: Dive Rite XT-1 first stages with over pressurization valves for safety. DIMENSIONS: 13 inches x 7 inches x 25 inches (33 cm x 18 cm x 64 cm) WEIGHT: includes tanks, cartridge, TransPac, wing,Aluminum 13 tanks: 51 lbs (23 kg)  

  • This product has Video Review.

    EEZYCUT Trilobite Line Cutter
    $24.95

    DRIS Dive Gear

    EEZYCUT Trilobite Line Cutter

    25 Review(s)

    The patented cutting mechanism provides the cleanest, sharpest, and the most effortless cutting action available. No-one ever forgets the "wow factor" the first time they use this unique, ergonomically designed cutting tool, as it slices and dices its way through line and webbing. The EEZYCUT® TRILOBITE is rated to cut its way through line with ease, repeatedly, up to 8mm thick, and can easily cut through larger line should the diver need to do so in such extremely rare situations. The EEZYCUT TRILOBITE also makes light work of all types of webbing. With cost effective replacement blades, this tool provides you with the sharpest cut in the water, every time.  Safer cutting toolOpen faced diving knives are notoriously dangerous, especially on rocking boats and in dark caves. Also, their large size means they are located in difficult to reach places, unsuitable for a response to an emergency situation. The small size of the EEZYCUT TRILOBITE means it can be conveniently located on any area of a divers configuration. The EEZYCUT TRILOBITE is available in two types of pouch. A harness pouch fits neatly onto any two inch scuba webbing. The EEZYCUT TRILOBITE is also available in a wrist pouch, which fits most dive computers with a 1 1/4 inch width strap, with ease. The design ensures that this has a snug, movement free fit against the wrist, where it provides the maximum amount of accessibility, and therefore the quickest response. Beyond that, for divers who are working in the water, locating the knife on the wrist means that the diver has to conduct only the minimal amount of movement necessary when using the cutting device. This makes it easier to maintain ideal trim and buoyancy in the water column. This in turn gives the diver the ability to maintain their awareness of the environment around them, making it a practical and safer option for working divers. (The thick width of the Galileo dive computers means that they can be worn on the wrist using the harness pouch). The Cleanest Sharpest cut every time - Incredibly effortless cut The "WOW" factor The ergonomically patented design uses a longer section of the cutting edge, prolonging the integrity of the blade by dispersing the erosion. As the line is pushed onto the blade by the frame of the tool, the cut is much more stable, which not only provides a much cleaner splice, but helps the blade retain it's edge. Other "closed" cutting tools have one pivotal stress point on the cutting surface which quickly corrodes and weakens. Sharper steel Normal "marine grade" stainless steel, in terms of diving knives, is generally the name given to 420 grade stainless steel, also known as, cutlery grade. Whilst it has a good corrosion capacity in water, it does not have such a good capacity to hold a sharp edge. Titanium can not create as sharp an edge as stainless steel. The grade of stainless steel used in the EEZYCUT TRILOBITE (440a) is known for it's capacity to hold an extremely sharp edge, whilst having very good corrosive qualities. When the blade loses its edge or starts to corrode, you can put a new blade in, and yet again have the sharpest, cleanest cut in the water. Washing in fresh water after diving is recommended for all stainless steel knives and blades. All stainless steel which is used in salt water, including open faced dive knives, need to be treated with care. Carefully coating any stainless steel blade in normal divers silicone grease prior to salt water usage significantly prolongs the life of the blade, and is recommended for the EEZYCUT TRILOBITE blades. Replaceable blades The replaceable blades allow the diver to always have the sharpest machined edge, just when they need it most. Nothing is as sharp as a machined edge, which means the sharpness of most dive knives deteriorate in their effectiveness, from the moment of purchase. Replacement blades with a machined edge make sense.Double sided design The double sided design means that it can be used more efficiently in a variety of situations, with less fiddling around. It is also very efficient in dealing with marine growth and kelp. Redundancy The small, convenient size (93 mm x 36 mm x 8 mm / 3.66 inches x 1.42 inches x 0.32 inches) make it ideal to use as part of a divers options for redundancy. Divers should carry back-ups of all life support equipment, including the cutting tool, and the EEZYCUT TRILOBITE can fit easily into that inventory. This means that the diver does not have to ditch their open faced knife should they wish to keep it as part of their diving equipment. User friendly design With no fully open blades in difficult to reach places, the EEZYCUT TRILOBITE is safe on rocking boats and low visibility situations. Tough frame The high strength polycarbonate plastic of the EEZYCUT TRILOBITE is rated to cut line up to 8 mm thick, with ease, every time. The EEZYCUT TRILOBITE also cuts all types of webbing with ease Available with Harness Pouch: Black, Yello/Black, Yellow/Orange, Glow In The Dark, Orange/Black,Pink/Black, Pink/White, Red/Red, Black/WhiteAvailable with Wrist Pouch: Black, Yellow/Black, Glow In The Dark, Black/WhiteAvailable with Flexi Pouch: Black, Yellow/Black, Yellow/Orange, Glow In The Dark, Orange/Black, Pink/Black, 

  • Ships FREE Worldwide!

    Infinity 30 BC System
    $849.00

    Halcyon

    Infinity 30 BC System

    2 Review(s)

        The Halcyon Infinity is not your typical buoyancy compensator. In fact, it establishes a new standard in single-tank diving, offering the unparalleled performance of a back mounted harness and the easy adjustability of a jacket BC. The heart of the Infinity BC is Halcyon’s Cinch Quick-adjust harness (patent pending). The Cinch harness is also available for double tanks and as an upgrade to existing Halcyon diving systems. The Cinch Quick-adjust provides rapid adjustment of the diving harness, allowing an unprecedented fit and easy equipment removal. The Infinity also features Halcyon’s new deluxe Harness Pads, providing the ultimate in diving comfort and convenience. The Infinity BC features Halcyon’s immensely popular Eclipse wing; the long, narrow profile supports a diver’s tank along his or her entire length, preventing unnecessary drag and minimizing in-water effort. Key Components of the Infinity BC System Cinch Quick-adjust (patent pending); infinitely adjustable with a simple push or pull of the webbing Eclipse Buoyancy Compensator (wing); available in either 30- or 40-lb. (14- or 18-kg) lift capacity Choice of Aluminum or Stainless Steel Backplate; standard or small size Optional ACB10 weight pockets Halcyon Deluxe Harness Pads featuring an integrated storage pocket for convenient stowage of lift devices Stainless steel Single-Tank Adapter with two cam straps; accommodates a weighted insert   System shown with optional weight pouches To select your custom color wing, webbing and logo options, please complete the Custom Wing Order Form and email to sales@diverightinscuba.com     ***Please note that processing custom orders will take approximately 2 weeks longer. 

  • Ships FREE Worldwide!

    This product has Video Review.

    E.Motion PLUS Men / Women Drysuit
    $2,770.00

    Santi

    E.Motion PLUS Men / Women Drysuit

    2 Review(s)

     Ask us about new color options for E.Motion Plus ULTIMATE MIXTURE FOR TOP PERFORMANCE. COMFORTABLE LIKE E.MOTION. DURABLE LIKE E.LITE. We offer 16 mens sizes in standard, 12 ladies sizes in standard, MTM/Custom offer, additional choice of options available. It is possible to customize the standard size with up to 4 size changes within the standard price. The E.Motion PLUS drysuit model comes as optimal and ultimate combination of the flexibility and lightness from E.Motion Ripstop quality and E.Lite exclusive durability and comfort. We have combined both functionalities in one, most sophisticated cut and design to provide the highest performance while diving in many different underwater environments, using recreational or technical gear. E.Motion PLUS will protect you where needed, keeping the flexibility and light wear at the same time. The construction of E.Motion PLUS includes top part and top front of trousers made of flexible and light 260 g/m2 Ripstop trilaminate fabric and exclusive E.Lite trilaminated fabric of 535 g/m2 in back of the trousers, at the belly and lower back area, elbows, crotch pad and lower part of front trousers for maximum protection where needed, at places exposed to possible damage. E.Motion PLUS comes in elegant, exclusive color combination of black, grey and sliver to underline the best choice you take while choosing this special model. E.Motion PLUS is equipped in standard with most innovative and comfortable SANTI Smart Seals® system – soft rings that allow fast and easy seal exchange for any seal you like or have at hand. Special cut of the crotch pad allows for comfortable leg movements. The E.Motion PLUS suit is equipped with a YKK Aquaseal plastic zipper which is very durable but also light and flexible. It is highly resistant to dirt and needs only minimal care of the docking area. SANTI offers 2 years warranty for the plastic zipper.For better and most convenient outlet valve placement on the arm, the zipper is installed in this model from the right shoulder to the left hip. As in any of SANTI drysuits, E.Motion PLUS is equipped in two big and solid cargo pockets with bungee strings to mount the equipment. In this model both pockets have a useful additional zipper fastened pocket for double ender.E.Motion Plus is equipped in standard with SANTI Flexsole boots.We add a collar hood made of 7/9 mm soft neoprene, or any other from SANTI range according to request. Available mens sizes: XS,S,SL,M,ML,MLL,LS,L,LL,LLL,XLS,XL,XLL,XXLS,XXL,XXXL. Available ladies sizes:XS, S, SL, M, ML, MLL, LS, L, LL, XLS, XL, XXL. Features:   innovative and comfortable SANTI Smart Seals® system – soft rings that allow fast and easy seal exchange for any seal you like or have at hand, YKK Aquaseal plastic zipper which is very durable but also light and flexible. It is highly resistant to dirt and needs only minimal care of the docking area. SANTI offers 2 years warranty for the plastic zipper. For better and most convenient outlet valve placement on the arm, the zipper is installed in this model from the right shoulder to the left hip, diverted front entry zipper to assure the best place for outlet valve, new cut of trousers, two big and solid cargo pockets with bungee strings to mount the equipment. In this model both pockets have a useful additional zipper fastened pocket for double ender, special cut of the crotch pad allows for comfortable leg movements, SANTI Flexsole boots in standard, a collar hood made of 7/9 mm soft neoprene, or any other from SANTI range according to request, latex nect seal insulated by 3 mm neoprene collar, high-profile Apeks outlet valve and inlet valve with “inflator” ending, internal suspenders, medium pressure hose 75cm, STAY DRY travel bag – water-repellent, 5 years warranty after registration to STAY DRY CLUB, total weight (including standard options for L size) – 3,9 kg. P-VALVE - FREE with suit purchase.  Download the Custom Measurement Form

  • 4.5" Double Ended SST
    $9.95

    DRIS Dive Gear

    4.5" Double Ended SST

    25 Review(s)

    4.5" Stainless Steel Double Ended Clip

  • Now On Sale

    This product has Video Review.

    Revolve Reel

    Was: $54.95

    On Sale: $22.00

    HOG Gear

    Revolve Reel

    3 Review(s)

    The HOG Revolve Reel is made of red Delrin and comes with orange line and a stainless steel clip.  This unique reel has a bearing in it so it allows the spool to spin freely without having to have your fingers in it.  The action is EXTREMELY smooth and very comfortable underwater.  It also allows you to easily let go if the line is fouled and the bag wants to take you to the surface.  Available in 2 different lengths,  100ft, and 150ft.    

  • This product has Video Review.

    Drysuit Latex Bottle Wrist Seals (pair)
    $24.99

    DRIS Dive Gear

    Drysuit Latex Bottle Wrist Seals (pair)

    30 Review(s)

    Standard Latex Bottle  Wrist Seal for your dry suit 5.75"-6.5" = SM 6.5"-7.25"= MD 7.25"-8"= LG 8"-8.75"= XL 8.75" + = 2XL Please measure around your wrist and use the above guideline for picking your size.    Check out our Repair Prices     

  • Luxfer Aluminum 80 Tank
    $149.99

    XS Scuba

    Luxfer Aluminum 80 Tank

    10 Review(s)

    The Luxfer Aluminum 80 is great for recreational divers as well as technical divers.  Using it in a variety of configurations, it's probably the most used tank in the world for diving applications.  The tank comes O2 Cleaned and with VIP Sticker**.  Current Hydro on all bottles unless advertised as older hydro. TANK COMES WITHOUT A VALVE **If you do not order a new valve, your VIP sticker will only be marked good for up to 40% O2.  If you are supplying your own valve, we do not know if it is O2 compatible or if it has been O2 cleaned, and therefore can NOT supply a VIP Sticker that says the combination is good for up to 100% O2 use.  If you have any questions on setting up your tank, please call us at the shop for advice.  *Visual Sticker will not be shipped with tanks purchased without a valve

  • Ships FREE in the USA!

    This product has Video Review.

    Highland Neoprene Pocket Shorts
    $90.00

    Highland

    Highland Neoprene Pocket Shorts

    20 Review(s)

    NEWLY UPDATED DESIGN!! New Neoprene shorts with pockets built in!  These are great for going over a wetsuit or drysuit to add those needed pockets. - Nylon Cord Draw String Waist to Prevent Slipping - Hide-Away Nylon Cord Loop for Hanging - Pockets with Double Needle Sewn Construction - Pocket Dimensions: 9” H x 6” W x 3” D - Five 3/4” 316 Stainless Steel Grommets per Pocket - Pocket Held Flat with Velcro Tabs when Empty - Real Velcro Brand Hook & Loop - 1680d Ballistic Nylon Material - Two 4” Webbing Straps for Gear Attachment per Pocket - Three 1” 316 Stainless Steel D-Rings per Pocket - Large Velcro Flap Closure - Interior Mesh Pocket - 2mm Super-Stretch Neoprene - Color Black - Fits Over Wetsuit or Drysuit - Durable Flat-Lock Seams - Advanced “Bike Shorts” Pattern   Waist Size: SM= 25"-29" MD= 29"-33" LG= 33"-37" XL= 37"-41"

  • Low Pressure Hoses
    $24.00

    XS Scuba

    Low Pressure Hoses

    42 Review(s)

    Pick your Hose length. Custom Hoses available upon request. Dont hesitate to ask

  • 3" Stainless Steel Snap
    $4.95

    DRIS Dive Gear

    3" Stainless Steel Snap

    36 Review(s)

    This 3" Stainless Steel Bolt Snap is #304 stainless from the spring to the body!  No need to worry about rusting in any water conditions as these clips are also passivated.  Passivation is a process that involves dissolving the iron that gets imbedded into the clips surface when it is being made.  This process is done by immersing the stainless steel parts into an acid solution that rids the stainless of the rust producing iron and takes the clip back to it's Rust Proof form. RUST FREE

 
 

Set Ascending Direction

Items 1 to 32 of 1963 total

per page
Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
 

Free Care Package with Undergarments over $300

Free Care Package with Undergarments over $300

Free Mask Case with Purchase of Full Face Snorkeling Mask

Free Mask Case with Purchase of Full Face Snorkeling Mask

Free $500 Platinum Warranty

Free $500 Platinum Warranty