815 267 8400

Wetsuit Hoods

Quality Dive Hoods at Affordable Prices - Best Selection Around

Wearing a hood while diving helps your entire body stay warmer so you enjoy your dive a whole lot more. Check out our selection of wetsuit hoods from Seasoft, 4th Element, Lavacore, and more.

Set Ascending Direction

Items 1 to 32 of 36 total

per page
Page:
  1. 1
  2. 2
  • Ships FREE in the USA!

    This product has Video Review.

    H1 5/10mm Polar Evoluted Hood w/HAV System
    $81.95

    Waterproof

    H1 5/10mm Polar Evoluted Hood w/HAV System

    22 Review(s)

    The body reacts to cold and heat by adjusting the blood stream to different parts of the body, like hands, fingers and feet. But the body can not adjust the blood flow to your head. This is to ensure brain function at all times.  The colder it gets, the more heat you lose from the head by radiation, or by conduction in the water. You stay warmer with an effective hood. Waterproof H1 hoods including the unique HAVS (Hood AirVenting System) are constructed with these scientific facts in mind and are proven to keep you warmer when you need it most.   3-D shaped Anatomical 5mm face and neck panels for comfort Glideskin seal HAVS system (double vents) I-Span superstretch nylon Bonded Hi-Quality Nylon thread Reflective logo Click here to see the European size chart

  • 3mm or 5mm Hood
    $49.50

    Fourth Element

    3mm, 5mm, or 7mm Hood

    12 Review(s)

    Both our 3mm hood and 5mm hood have a simple minimalist design with a smooth Glideskin interior and are produced using stretch neoprene to ensure a comfortable fit. The short collar suits both dry and wet suits, and micro holes in hood vent air with minimal water ingress.

  • Merino 7mm Zippered Drysuit Hood
    $59.95

    Pinnacle

    Merino 7mm Zippered Drysuit Hood

    13 Review(s)

    The Merino™ Lined Drysuit Hood is the warmest hood available, and will keep a drysuit diver’s head warm and comfortable in even the most severe water temperatures. NEW ZIPPERED CLOSURE Pinnacle’s patented Merino™ lining throughout the hood Merino™ adds up to 35% more thermal efficiency than neoprene alone Merino™ does not promote the growth of bacteria, which makes the hood more hygienic and reduces odor Merino™ dries faster than traditional neoprene linings 3mm face seal with smoothskin seal Face seal can be trimmed to any desired size Complete double-glued and blind stitched construction Short neck to work in concert with drysuit neck seal Automatic vents allow air to escape as necessary from the top of the hood while restricting water entry Reflective front patch and rear pattern for instant recognition and safety Can be worn with any drysuit For sizing, measure around your eyebrows. 18-20" - XS 19-20" - SM 20-22" - MD 21-23" - ML 22-24" - LG 23-25" - XL 24-26" - 2XL

  • H1 5/7mm Hood-No BIB
    $59.95

    Waterproof

    H1 5/7mm Hood-No BIB

    13 Review(s)

    The body reacts to cold and heat by adjusting the blood stream to different parts of the body, like hands, fingers and feet. But the body can not adjust the blood flow to your head. This is to ensure brain function at all times.  The colder it gets, the more heat you lose from the head by radiation, or by conduction in the water. You stay warmer with an effective hood. Waterproof H1 hoods including the unique HAVS (Hood AirVenting System) are constructed with these scientific facts in mind and are proven to keep you warmer when you need it most.  3-D shaped Anatomical Non-Bib version for drysuits Glideskin seal HAVS system (double vents) I-Span superstretch nylon Bonded Hi-Quality Nylon thread Reflective logo Click here to see the European size chart

  • Now On Sale

    OPEN BOX H1 5/10 High Visibility Hood- Size Large

    Was: $92.95

    On Sale: $79.00

    Waterproof

    OPEN BOX H1 5/10 High Visibility Hood- Size Large

    OPEN BOX 10MM HIGH VISIBILITY HOOD POLAR EVO Return from a large department order. Brand new with tags and in the box. Size Large ONLY! The H1 High Visibility Hood features a High Visible Orange coloured surface with reflective patches for ultimate visibility and detection in choppy sea conditions in addition to the standard 10mm double layered protection in critical heat loss areas and glideskin seals for the neck and face. H1 5/10mm HVH includes the unique HAVS (Hood Air Venting System) which uses one-way valves to vent annoying air build-up in the hood.

  • Ships FREE in the USA!

    H1 5/10mm Sandwich Hood
    $89.95

    Waterproof

    H1 5/10mm Sandwich Hood

    3 Review(s)

    10MM SANDWICH FACESEAL HOOD POLAR EVO  The H1 10mm Sandwich Face Seal Hood features a 10mm double layered protection in critical heat loss areas and sandwich constructed smoothskin/glideskin seal for the face. Waterproof H1 10mm includes the unique HAVS (Hood Air Venting System) which uses one-way valves to vent annoying air buildup in the hood.Waterproof created a series of accessories we tagged as ” Polar Evoluted”, the H1 5/10mm Sandwich Face Seal HAVS model is one of them.• 3-D shaped • Smoothskin/Glideskin sandwich seal • HAVS system • I-Span superstretch nylon • Bonded Hi-Quality Nylon thread Click here to see the European size chart

  • 7mm Drysuit Hood
    $39.95

    Pinnacle

    7mm Drysuit Hood

    6 Review(s)

    This drysuit hood comes standard with most Pinnacle drysuits and is also available as a stand-alone item.  Features such as 7mm titanium-lined neoprene, 3mm smoothskin face seal, glued and blind stitched construction, reinforced seams, and non-direct ventilation ensure warmth, performance, and durability. 7mm titanium-lined neoprene throughout the head and neck areas 3mm face seal with smoothskin seal Face seal can be trimmed to any desired size Complete double-glued and blind stitched construction Short neck to work in concert with drysuit neck seal Vented to allow air to escape as necessary Reflective front patch and rear pattern for instant recognition and safety Can be worn with any drysuit  

  • Thermocline Hood
    $54.90

    Fourth Element

    Thermocline Hood

    5 Review(s)

     The lightweight Thermocline Hood is perfectly suited for scuba diving in temperate to warm waters. It is remarkably comfortable and warm as well as being very easy to don and remove.

  • This product has Video Review.

    H1 5/7mm Hood W/HAV System
    $64.95

    Waterproof

    H1 5/7mm Hood W/HAV System

    7 Review(s)

    The body reacts to cold and heat by adjusting the blood stream to different parts of the body, like hands, fingers and feet. But the body can not adjust the blood flow to your head. This is to ensure brain function at all times.  The colder it gets, the more heat you lose from the head by radiation, or by conduction in the water. You stay warmer with an effective hood. Waterproof H1 hoods including the unique HAVS (Hood AirVenting System) are constructed with these scientific facts in mind and are proven to keep you warmer when you need it most.   3-D shaped Anatomical Glideskin seal HAVS system (double vents) I-Span superstretch nylon Bonded Hi-Quality Nylon thread Reflective logo

  • Sealtek Wetsuit Hood
    $59.95

    Bare

    Sealtek Wetsuit Hood

    1 Review(s)

    The finest high performance hood we’ve ever made. Recreational and professional divers will appreciate its outstanding comfort and ease of donning and doffing. 3MM ELASTEK/GLIDESKIN-IN trimmable face and neck seal glides nicely over your hair SEAMTEK exterior seam protection reduces water penetration at the seams keeping your head warm and dry Incorporates BARE’s SEALTEK ring seal system for maximum water sealant performance when used with a wetsuit or drysuit Vented to allow trapped air to escape Hood neck seal mates with wetsuit seal/collar Mask strap grip pad on the back of the hood secures your mask strap in place Double glued and blind stitched with SECURE-LOCK construction improves isolation and reduces flushing keeping you warmer and diving longer Material: 5MM or 7MM ELASTEK full-stretch neoprene for ultimate stretch and comfort   Innovation: All exterior seams are sealed with BARE’s SEAMTEK liquid seam tape and incorporate our SEALTEK ring seal system designed to work together to reduce or eliminate water penetration and improve diver comfort and warmth

  • Ships FREE in the USA!

    H1 5/10 High Visibility Hood
    $92.95

    Waterproof

    H1 5/10 High Visibility Hood

    2 Review(s)

    10MM HIGH VISIBILITY HOOD POLAR EVO The H1 High Visibility Hood features a High Visible Orange coloured surface with reflective patches for ultimate visibility and detection in choppy sea conditions in addition to the standard 10mm double layered protection in critical heat loss areas and glideskin seals for the neck and face. H1 5/10mm HVH includes the unique HAVS (Hood Air Venting System) which uses one-way valves to vent annoying air build-up in the hood.

  • This product has Video Review.

    Heat Zippered Hood
    $70.00

    Aqua Lung

    Heat Zippered Hood

    26 Review(s)

    Loaded with innovative features, this is the ultimate neoprene dry suit hood.   Center panels are made from double-layered 3mm titanium neoprene with molded vent valves to release trapped air from within the hood. 7mm neoprene side panels, 5mm forehead, and 3mm chin offers optimum warmth, supreme comfort while eliminating jaw fatigue. Seams are glued, blind-stitched, and seam sealed. Zipper with sealing gusset and Velcro tab at zip base allows easy donning and doffing. Grip Strips located at hood side prevent mask strap from slipping. Ergonomically designed collar conforms to your body for maximum coverage and mobility. 

  • Ti PRO 3 mm and 6 mm Drysuit Hood (no zipper)
    $36.99

    Seasoft

    Ti PRO 3 mm and 6 mm Drysuit Hood (no zipper)

    6 Review(s)

    The SEASOFT Ti PRO™ Drysuit Hood with no zipper is the most comfortable and warmest drysuit hood available,  Here's why:   • The 3 back panels are compressed neoprene, your hood should not be getting thinner as you go deeper!   • There are no seams in the middle of the seam to cause jaw fatique.   • SEASOFT uses 4 different types of neoprene to make this hood, others use one or two.   • There are two tiny holes in the top of the hood with a baffle system to allow air to purge.   • There is "skin in" on the neck to bind to your drysuit seal.   • High quality neoprene is used throughout on every hood.   Why should you buy this SEASOFT Ti PRO™ Drysuit Hood? The short answer: this SEASOFT hood is more comfortable and warmer than other hoods and here's why. FACT: The head is responsible for the greatest heat loss while diving, up to 35%. FACT: Other hoods use neoprene that contains lots of air bubbles, the claim being they are comfortable. However, these poor quality neoprene hoods are easily compressed as you descend – good-bye thermal protection! The neoprene is getting thinner just when you need it the most! FACT: Many divers get cold thinking it’s their wetsuit or drysuit making them cold when it’s actually the lack of a warm hood. SOLUTION: SEASOFT uses compressed neoprene in the three back panels for unsurpassed warmth. SEASOFT Hoods do NOT get thinner at depth; they keep you warm and toasty throughout your dive. FACT: Most companies use one type of neoprene and occasionally two to make their hoods, their entire goal for the hood is to control costs.   SOLUTION:  SEASOFT uses 4 or more types of neoprene for every one of its hoods because each part of the hood is performing a specific task.  Most of the people who own and work at SEASOFT are divers, their goal is produce the warmest, most comfortable hood for you AND them to dive. FACT:  TITANIUM FLAKE FOIL™ has been proven to keep warmth inside gloves, boots, hoods and drysuits. SOLUTION:  Even though it is costly SEASOFT has consistently used TITANIUM FLAKE FOIL in virtually all of its neoprene products and has obsorbed the cost of doing so.  Most of SEASOFT's products are no more expensive than others less inferior products. So there are the facts, SEASOFT has invested more than 33 years into its engineering to bring you the warmest and most comfortable hoods you can buy at any price, all you have to do is buy one.

  • Standard Hood
    $29.95

    Pinnacle

    Standard Hood

    3 Review(s)

    Now available in 3mm as well as 7mm and 5mm all Pinnacle hoods incorporate the features that have made our wetsuits famous. 3mm, 5mm or 7mm titanium lined Elastiprene neoprene 3mm smoothskin face seals Face seal is fully trimmable for custom fit Offset venting system Reflective rear pattern Double glued and blind stitched

  • H1 2mm Ice Hood
    $39.95

    Waterproof

    H1 2mm Ice Hood

    1 Review(s)

    2MM ONESIZE A One Size Fits All stretchy “over-hood” that covers all exposed skin. Holes for mask and breathing device can be trimmed to perfection by the user. Also provides excellent protection against Jellyfish in infested waters. A smart solution; just pull the H1 Icehood over your regular neoprene hood to get additional protection in really severe cold water diving-conditions. TheH1 Icehood is also easily adaptable for use in tropical and warm water conditions, just cut out the facial parts and you have created your personalized Hood.Hypothermia vs Hoods.The body reacts to cold and heat by adjusting the blood stream to different parts of the body, like hands, fingers and feet. But the body can not adjust the blood stream to your head. This to ensure the brains function during all conditions. That is why the colder it gets, the more heat you loose from the head by radiation, or even worse, by conduction in the water. You keep warmer with an effective hood.

  • Chillproof Hood
    $39.95

    Sharkskin

    Chillproof Hood

    l, odour resistant, itch resistant and machine washable.  More than 25% of body heat is lost through the head and extremities of the body. The hood design provides the best insulation and protection for cold dives and activities. It can even be worn under a conventional neoprene hood for extra warmth, and is flexible enough to slide off if required and still be comfortable.   Sharkskin Chillproof is an aquatic specific, windproof 3-layer composite material that has been developed for water sports athletes. The comfortable ‘micro fleece’ layer is next to the skin and ‘wicks’ moisture and sweat away from the body to help keep you dry. The second middle ‘technical’ layer is 100% windproof yet breathes to regulate body temperature while stopping windchill. The third outer layer is a nylon/lycra blend for abrasion resistance and 4 way stretch. It is also UV resistant for sun protection and has a durable water repellent finish (DWR) to provide a protective shell that ‘sheds’ water. Sharkskin Chillproof is neutrally buoyant, anti-microbia PERFORMANCE GUARANTEE Authentic Sharkskin garments come with a 12 month guarantee on workmanship. Excludes fading and degeneration as a result of excessive exposure to chlorine or sunlight. Sharkskin guarantees their product will perform as advertised.   CARE INSTRUCTIONS: Follow these instructions to get optimum performance out of your Sharkskin product. Machine washable in cold water Line dry Do not bleach Do not iron Do not dry clean Wash after use to remove residual chlorine or salt Keep out of the sun when not in use Neptune Wetsuit Wash is recommended  

  • Merino Zippered Hood
    $54.95

    Pinnacle

    Merino Zippered Hood

    3 Review(s)

    The Merino™ Lined Hood is the warmest wetsuit hood available, and will keep a diver’s head warm and comfortable in even the most severe water temperatures. NOW WITH NEW ZIPPER CLOSURE!   Pinnacle’s patented Merino™ lining throughout the hood Merino™ adds up to 35% more thermal efficiency than neoprene alone Merino™ does not promote the growth of bacteria, which makes the hood more hygienic and reduces odor Merino™ dries faster than traditional neoprene linings 3mm face seal with smoothskin seal Face seal can be trimmed to any desired size Complete double-glued and blind stitched construction Pinnacle’s patented neck sealing system greatly reduces the possibility of water entry between the suit and the hood Automatic vents allow air to escape as necessary from the top of the hood while restricting water entry Reflective rear pattern for instant recognition and safety Can be worn with any brand or style of wetsuit. **Pinnacle Merino-Lined Hood 7mm not available in XS [Only 5mm] For sizing, measure around your eyebrows. 18-20" - XS 19-20" - SM 20-22" - MD 21-23" - ML 22-24" - LG 23-25" - XL 24-26" - 2XL

  • 7mm Cold Water Hood
    $69.50

    Fourth Element

    7mm Cold Water Hood

    7MM Cold Water Hood Stretch neoprene ensures a comfortable fit and the glideskin face seal minimises the flow of water into the hood. Micro holes in the top vent air with minimal water ingress and the collar is designed to work with drysuits fitted with a warmneck.   Comes in XS, S, M, L, XL, 2XL. 

  • Ti PRO Drysuit Hood with Zipper
    $54.99

    Seasoft

    Ti PRO Drysuit Hood with Zipper

    2 Review(s)

    Why should you buy the SEASOFT Ti PRO Drysuit Hood with Zipper? As you descend the increasing pressure causes typical neoprene hoods to get thinner just as the deeper water is getting colder.   40% of heat loss is from the head area, it seems like this should be a place we adequately protect to keep us warm and comfortable.  So SEASOFT Ti PRO™ Hoods have compressed neoprene for the back panels of the hood. This means that no matter how deep you go, they are still working to keep you warm! You will not find any seams down the middle of the chin either. This seam, found in almost all hoods today, causes jaw fatigue. The seam is there because it is cheaper to make hoods this way. SEASOFT just doesn't believe that a hood is the place to go cheap. SEASOFT Hoods are available in 3 mm and 6 mm wetsuit with bib, full face mask versions, and drysuit versions with and without a zipper.   The SEASOFT Ti PRO™ 6 mm Drysuit Hood with Zipper is the most comfortable and warmest drysuit hood available,  Here's why: • The 3 back panels are compressed neoprene, your hood should not be getting thinner as you go deeper! • Rugged #10 size zipper for those that desire this feature with a protective gusset behind the zipper. • There are no seams in the middle of the chin to cause jaw fatique. • SEASOFT uses 4 different types of neoprene to make this hood, others use one or two. • There are two tiny holes in the top of the hood with a baffle system to allow air to purge. • There is "skin in" on the neck to bind to your drysuit seal. • High quality neoprene is used throughout on every hood. • There are two layers of TITANIUM FLAKE FOIL™ to retain heat inside the hood.

  • V-Skin Hood
    $34.95

    Pinnacle

    V-Skin Hood

    About V-Skin Pinnacle's new V-skin line takes all the technical features that Pinnacle has developed over the years and incorporates them into a layering system that will add significant thermal protection without buoyancy.  The V-skin line has taken Pinnacle's patented Merino™ lining to another level by incorporating it into a tri-laminate material with a microporous membrane and high stretch outer lycra. This highly technical combination of materials will form perfectly to the body without causing restriction; the form fit creates the perfect water layer held in place by the impermeable membrane. When out of the water the microporous membrane acts as a barrier eliminating wind chill while allowing excess heat and moisture to escape. With strategically placed highly breathable bi-laminate Merino™ panels the new V-skin line is the most comfortable and thermally efficient product on the market today.   Lightweight V-skin hood controls hair, portects from the elements and adds warmth Super stretch Lycra allows snug yet comfortable fit Merino lining is naturally antibacterial provides insulation without casuing overheating Packs ups very small for travel   Available in sizes: Small, Medium, Large, XL

  • Lavacore Hood
    $24.95

    Lavacore

    Lavacore Hood

    5 Review(s)

    The Lava Core Hood has been designed to protect against thermal loss in water as well as protecting against the wind. The Lava Core hood can be worn on its own but also under wetsuit or dry suit for extra warmth. This dive hood has a unisex fit and has a sun protection factor of 30 so you can spend longer in the water. Features Water repellant and anti chill properties on outer layer Quick drying outer layer High stretch mid layer which is wind proof and breathable. Allows perspiration to be wicked away Inner layer fleece has anti pill treatment Anti microbial lining to reduce odour Neutrally buoyant Flatlocked seams overlapped for water integrity Full gusset under arms to provide movement and stretch Sun protection of SPF 30 plus Specification Outer layer: Lycra 180g/m2 knitted nylon wrap knit tricot Mid layer: Impermeable, breathable microporous PU film Inner layer: Fleece 240g/m2 4 way stretch fleece with elastane

  • Wetsuit Hood
    $44.99

    Seasoft

    Wetsuit Hood

    When diving, the deeper a diver goes the colder it generally gets and with increasing pressure, a typical neoprene hood gets thinner. If the temperature is getting colder and your hood is getting thinner, you’re going to get cold. And, when you consider that 40% of heat loss is from the head area, it seems like this would be a place to make sure you are adequately protected to ensure warmth and comfort. All of our SEASOFT Ti PRO™ Hoods have compressed neoprene for the back panels of the hood. This means that no matter how deep you go, they are still their original thickness and working to keep you warm! You will not find any seams down the middle of the chin either. This seam, found in almost all hoods today, can cause jaw fatigue. The seam is there because it is less expensive to make a hood from just two halves. We do not believe that a hood is the place to go cheap. Available in wetsuit with bib, and drysuit versions with and without a zipper.   Available in both 3mm and 6mm thickness

  • Ships FREE in the USA!

    Hood/Neck Combo for Neck Tite
    $99.00

    DRIS Dive Gear

    Hood/Neck Combo for Neck Tite

    Looking to add a Latex hood to your Neck tite?  Well, don't bother trying to jam a neck seal and hood into the system when you can buy it all ready to go!  This combo has the neck seal already glued into the hood, leaving about an inch of the hood to tuck into the neck tite.  This allows you to have a neck seal and hood in the neck tite, without having it be doubled up.  Trying to stick both seals into the neck tite doesn't really fit, unless you have this combo! You can even make it yourself with our Neck Seal and Latex hood.  Just use the dry adhesive tape our drysuit glue.  For the price though, it is easier to buy it already made. Neck seal is 1 size fits all and is trimmable to fit.

  • 6mm Light Standard Hood
    $74.00

    Santi

    6mm Light Standard Hood

    Light Standard Neoprene Hood   Features: composed of two smooth and elastic neoprene qualities ultimate stretch and comfort 6mm neoprene in head area 5mm neoprene in face area vented to allow air to escape finished with 0,5mm nylon jersey from both sides for easier wear sizes: S-XXL

  • This product has Video Review.

    H1 3/5mm Hood W/HAV System
    $59.95

    Waterproof

    H1 3/5mm Hood W/HAV System

    The body reacts to cold and heat by adjusting the blood stream to different parts of the body, like hands, fingers and feet. But the body can not adjust the blood flow to your head. This is to ensure brain function at all times.  The colder it gets, the more heat you lose from the head by radiation, or by conduction in the water. You stay warmer with an effective hood. Waterproof H1 hoods including the unique HAVS (Hood AirVenting System) are constructed with these scientific facts in mind and are proven to keep you warmer when you need it most. 3-D shaped Anatomical Glideskin seal HAVS system (double vents) I-Span superstretch nylon Bonded Hi-Quality Nylon thread Reflective logo   Click here to see the European size chart

  • Latex Hood
    $24.99

    DRIS Dive Gear

    Latex Hood

    4 Review(s)

    These latex hoods are available in two sizes.  These need to be installed using glue or our Dry Adhesive tape.

  • Heat Non-Zip Hood
    $65.00

    Aqua Lung

    Heat Non-Zip Hood

    Loaded with innovative features, the HEAT Series Hoods are the ultimate in neoprene dry suit hoods.   Features 7mm neoprene side panels, 5mm forehead, and 5mm chin offers extra warmth & supreme comfort. Center panels are made from double-layered 3mm titanium neoprene with molded vent valves to release trapped air from within the hood. Seams are glued, blind-stitched, and seam sealed. Grip Strips located at hood side prevent mask strap from slipping. Ergonomically designed collar conforms to your neck for maximum coverage and mobility.   Sizes: S, M, L, XL

  • 3mm Quantum Standard Hood
    $25.00

    Akona

    3mm Quantum Standard Hood

      This flexible Akona hood is a great versatile hood that fits any line of products.    3mm Quantum Stretch neoprene.  Flat lock stitching.  Extended neck to protect diver from sea itch and jellyfish.   

  • Ships FREE in the USA!

    This product has Video Review.

    Covert Hood
    $79.95

    Sharkskin

    Covert Hood

    Further ‘Covert’ protection by masking the head’s electric signal. Comfortable, warm, flexible and technical. Rated SPF 50+ for sun protection.   The Sharkskin Covert range is made with HECS conductive carbon fibre material. This revolutionary concealment technology reduces the human body’s electric signal making you less detectable to underwater marine life. The Covert range includes a full suit, hood and socks to contain and mask as much of your bodies electric signal as possible.   How HECS works HECS patented technology works by blocking the human electric signal. HECS is based on 3 simple scientific principles. 1: All living things emit a faint electric signal. 2: Many animals can detect electric signals.  3: A conductive screen known as a Faraday cage can block electric signals.  HECS Stealthscreen is made of conductive carbon fibers uniquely woven to reduce the human electric signal. HECS allows, photographers, wildlife researchers and divers to get closer to animals in their natural undisturbed state. HECS is NOT in effect an "invisibility cloak". The wearer must also employ traditional concealment techniques like visual camouflage, scent reduction techniques (staying down-wind) as well as noise and movement minimisation.  The wearer assumes all responsibility and risk when in the habitat of wild animals.   PERFORMANCE GUARANTEE Authentic Sharkskin garments come with a 12 month guarantee on workmanship. Excludes fading and degeneration as a result of excessive exposure to chlorine or sunlight. Sharkskin guarantees their product will perform as advertised.   Follow these instructions to get optimum performance out of your Sharkskin product. Machine washable in cold water Line dry Do not bleach Do not iron Do not dry clean Wash after use to remove residual chlorine or salt Keep out of the sun when not in use Neptune Wetsuit Wash is recommended  

  • Chillproof Beanie
    $29.95

    Sharkskin

    Chillproof Beanie

      Sharkskin Chillproof is an aquatic specific, windproof 3-layer composite material that has been developed for water sports athletes. The comfortable ‘micro fleece’ layer is next to the skin and ‘wicks’ moisture and sweat away from the body to help keep you dry. The second middle ‘technical’ layer is 100% windproof yet breathes to regulate body temperature while stopping windchill. The third outer layer is a nylon/lycra blend for abrasion resistance and 4 way stretch. It is also UV resistant for sun protection and has a durable water repellent finish (DWR) to provide a protective shell that ‘sheds’ water. The three layers of Sharkskin when combined together provide the equivalent warmth of a 2.5 to 3mm wetsuit, but unlike a wetsuit the Sharkskin Chillproof material stops windchill. Sharkskin Chillproof is neutrally buoyant, anti-microbial, odour resistant, itch resistant and machine washable. ONE SIZE

  • H1 3/5mm Hood - No BIB
    $56.95

    Waterproof

    H1 3/5mm Hood - No BIB

    4 Review(s)

    The body reacts to cold and heat by adjusting the blood stream to different parts of the body, like hands, fingers and feet. But the body can not adjust the blood flow to your head. This is to ensure brain function at all times.  The colder it gets, the more heat you lose from the head by radiation, or by conduction in the water. You stay warmer with an effective hood. Waterproof H1 hoods including the unique HAVS (Hood AirVenting System) are constructed with these scientific facts in mind and are proven to keep you warmer when you need it most.   3-D shaped Anatomical Non-Bib version for drysuits Glideskin seal HAVS system (double vents) I-Span superstretch nylon Bonded Hi-Quality Nylon thread Reflective logo   Click here to see the European size chart

  • 3mm Beanie
    $29.95

    Pinnacle

    3mm Beanie

    4 Review(s)

    The 3mm Beanie is great for warm water diving as well as surfing and other watersports. Since the majority of a diver’s heat loss is through his head, this light and comfortable Beanie is enough to really improve a diver’s comfort level. 3mm titanium-lined neoprene Velcro closed chin strap keeps Beanie securely in place Packs into a very small package. Ideal for travel Excellent for tropical diving, particularly for the last few dives of the day or of the week Very stretchy and comfortable Equally suited for water skiers, surfers, and other watersport enthusiasts

 
 

Set Ascending Direction

Items 1 to 32 of 36 total

per page
Page:
  1. 1
  2. 2