815 267 8400

Set Ascending Direction

10 Item(s)

per page
  • Exposure Suit Hanger 5.0
    $27.99

    Underwater Kinetics

    Exposure Suit Hanger 5.0

    3 Review(s)

    The Exposure Suit Hanger is built to optimally dry and store the heaviest gear. Its 5 inch shoulder width and heavy duty stainless steel hook will support over 100 pounds of outerwear. Its designed to hold open suits, vests and gear for improved air circulation while drying. Its durable, broad shoulder also prevents creases and damage to foam suit material and seams.   This 5 inch shoulder width hanger will support over 100 pounds of outer wear for drying or storage. The hook is made from heavy duty stainless steel and the molded ABS resin shoulder form is highly impact resistant. Wet suits, dry suits, heavy winter gear, tactical vests, turnout gear, etc. are held open for good air circulation while drying. The broad shoulder also prevents creases in that area which can cause damage to foam suit material. Proudly made in the USA Dimensions: 21.50 inches x 7 inches x 14.20 inches ( 4.61 cm x 17.78 cm x 36.07 cm)

  • This product has Video Review.

    HangAir
    $46.99

    Underwater Kinetics

    HangAir

    5 Review(s)

          SPECIFICATIONS SIZE: 22.7 L x 15.1 W x 9 D inches Part Numbers: • 24061 - HangAir Hanger, 100/240VAC (US) • 24062 - HangAir Hanger, 100/240 VAC (Euro)   Accessories •HangAir Power Supply, US •HangAir Power Supply, Euro •HangAir Power Supply, 12 VDC   Due to the odd nature of the size of this product, additional shipping charges may apply that do NOT show up when you checkout.     Dries wetsuits, dry suits, turnout gear, rainsuits and heavy protective clothing in hours instead of days. High power waterproof fan pushes 120 cubic feet of air per minute Quick drying process retards the development of bad odors Safe low voltage power is supplied to the hanger fan through a 15 ft cord from a 100/240 VAC universal wall mounted adapter Wide shoulder construction prevents damaging creases in fabric Super strong nylon body with stainless steel hook supports 100 lbs Limited Lifetime Warranty   The UK HangAir® Drying System uses a high-power waterproof fan to completely dry and ventilate suits of all kinds in mere hours. By maintaining equipment with the HangAir® Drying System you can enjoy the comfort of a freshly dried suit before every excursion, ensure that your suit is blown clean and dry from the inside before storage, eliminate bad odors, and add years to the life of your equipment. The UK HangAir® is molded from incredibly tough plastic resin and sports a steel hook which will comfortably support up to 100 pounds. Safe, low voltage power is supplied to the hanger fan through a tough 15 foot cord attached to a universal power 100/240 VAC wall adapter.

  • Multi Hanger
    $10.95

    Edge Gear

    Multi Hanger

    1 Review(s)

    Multi-Purpose Scuba Gear Hanger allows you to hang all of your gear in one easy place. Holds BCDs, regulators, gloves, gauges, boots, and more!

  • Super Hanger Bundle
    $24.99

    Underwater Kinetics

    Super Hanger Bundle

    6 Review(s)

    Take care of all of your gear with this Super Hanger Bundle. This bundle includes one wetsuit / drysuit hanger, one accessory hanger, and one BC hanger.  You'll be able to hang up your suit, Bc, Regulators, computers, gloves, boots, fins and anything else that you take in the water with you!   Super Hanger When the average hanger just doesn’t cut it, rely on the Super Hanger. We know your gear is often heavy and wet. So, we built the Super Hanger sturdy, with high quality non-corrosive materials. It holds more weight, so your valuable stuff won’t end up on the ground.   One piece I-beam construction for strength. Non-corroding plastic resin will not rust Supports up to 20 pounds Proudly made in the USA 16.6 inches x 1.20 inches x 9 inches (42.16 cm x 3.05 cm x 22.86 cm)   Super Accessory Hanger This unique non-corroding hanger holds gloves, booties, hood and fins for drying and storage. This unique hanger holds dive gloves, hood, booties and fins.   It allows proper drying and keeps them off the floor to prevent damage. One piece I-beam construction for strength. Non-corroding plastic resin will not rust Supports up to 20 pounds Size: 1.2 x 13 x 20 inch **Due to the awkward size of this product, you may incur additional shipping fees that will not show up in your shopping cart** Super BC Hanger   This non-corroding hanger is designed specially for holding a BC and regulator during drying and storage. This unique hanger is built specifically for hanging your expensive BC and regulator.   Raised hooks are added to the tips of the hanger shoulders to prevent the BC from sliding off. A T-hook extends from the bottom of the hanger for draping hoses from your regulator. With this hanger your equipment will dry quickly and safely off of the floor. One piece I-beam construction for strength. Non-corroding plastic resin will not rust Supports up to 20 pounds Size: 1.2 x 16 x 10 inch

  • Super Hanger
    $9.99

    Underwater Kinetics

    Super Hanger

    18 Review(s)

    When the average hanger just doesn’t cut it, rely on the Super Hanger. We know your gear is often heavy and wet. So, we built the Super Hanger sturdy, with high quality non-corrosive materials. It holds more weight, so your valuable stuff won’t end up on the ground.   One piece I-beam construction for strength. Non-corroding plastic resin will not rust Supports up to 20 pounds Proudly made in the USA 16.6 inches x 1.20 inches x 9 inches (42.16 cm x 3.05 cm x 22.86 cm)

  • Super BC Hanger
    $11.99

    Underwater Kinetics

    Super BC Hanger

    21 Review(s)

    Finally, a hanger designed specifically for holding a BC Vest and regulator during drying and stoarge. It is built sturdy with high quality non-corrosive materials for safe drying.The Super BC Hanger is also ideal for use with police vests, body armor and bulletproof vests. Due to its expert design, your gear fits on it easily, for a no-hassle drying and storage solution.   One piece I-beam construction for strength. Non-corroding plastic resin will not rust Supports up to 20 pounds Proudly made in the USA Dimensions: 16 inches x 1.20 inches x 10 inches (40.64 cm x 3.05 cm x 25.40 cm)

  • Super Accessory Hanger
    $16.99

    Underwater Kinetics

    Super Accessory Hanger

    11 Review(s)

    Our uniquely designed hanger holds your dive gloves, hood, fins, and booties. The Super Accessory Hanger is an effective solution for drying your gear after a dive and protecting it from damage on the floor.   One piece I-beam construction for strength. Non-corroding plastic resin will not rust Supports up to 20 pounds Proudly made in the USA Dimensions: 13 inches x 1.20 inches x 20 inches ( 33.02 cm x 3.05 cm x 50.80 cm)   **Due to the awkward size of this product, you may incur additional shipping fees that will not show up in your shopping cart**

  • Dry Suit Hanger
    $15.00

    XS Scuba

    Dry Suit Hanger

    6 Review(s)

    Hang your suit by the boots and let it dry and store properly and naturally. This swivel hanger is a great addition to keep your expensive drysuit in perfect condition

  • Wetsuit Hanger
    $7.95

    Edge Gear

    Wetsuit Hanger

    Grab one of these fantastic heavy duty wetsuit hangers. Available in yellow and black.  

  • XS Hanger
    $12.95

    XS Scuba

    XS Hanger

    11 Review(s)

    Holds your Mask, Snorkel, Fins, Boots, and Gloves Designed for quick drainage and drying One Place storage for your gear Removable center bar for flat storage and travel Tough X-Beam construction **Due to the awkward size of this product, you may incur additional shipping fees that will not show up in your shopping cart**

 
 

Set Ascending Direction

10 Item(s)

per page