Buy Diving Fins | Scuba Diving Fins | Dive Right In Scuba | www.diverightinscuba.com

Atomic Aquatics gives you choices to meet your dive needs and personal swimming style. BladeFins are designed to deliver... Power and thrust that only a paddle fin design can provide divers to cruise through the water. Unique structural engineering combines both Power-Loop Monocoque and Frame Rail designs to maximize kicking power. Vertical stabilizers on fin tips keep the fin tracking straight up and down with every kick. Wicked fin and buckle styling for a distinctive look that perfectly complements the Atomic VENOM mask and SV Series snorkel   How BladeFins Work The Four C’s: Capture - Contain - Channel - Control Atomic Aquatics BladeFins Capture water and Contain the flow without spilling it over the edges while Channeling the flow of water down the blade and off the vertical stabilizer edge tips, and Controlling the power with two frame structures (Monocoque and Frame Rail) to fully optimize the paddle fin design and kicking effort.   BladeFin Design By uniquely combining two structural frame designs used in aircraft and Indy race cars, Atomic BladeFins are engineered for power and thrust. Power-Loop Monocoque Structure The engineering term Monocoque means “singleshell” utilizing the external skin to support most of the load area while power is applied through the frame rails. Foot Pocket Power Plate The Power-Loop Monocoque structure is connected to the sole plate (Power Plate) giving divers a solid feeling like the fin is “bolted” to the foot. Power Rail The frame rail design on each side of the fin mimics a backbone or spine connecting to the Monocoque. Vertical Stabilizers Oversized stabilizers at fin tips keep the fin tracking straight up and down.   EZ-LOK Buckle System Easily snap the buckle on and off. And be confident that it will not release accidentally. Buckles rotate 180 degrees and straps adjust with a simple pull.   Warranty & Care Atomic Aquatics BladeFins are warranted against defects for a period of one year. Keep out of direct sunlight when possible to avoid color fading. Store your fins with the foot pocket inserts in place and in a manner that prevents deforming.  

A new high-performance Atomic Aquatics fin. The new X1 Blade Fins are designed with a firmer blade for "ultimate power" general purpose diving, tech diving, extreme applications and alternate kicking styles.  Ultimate power with every kick.  The Atomic X1 BladeFin combines a solid internal frame and firmer, shorter blade design to maximize kicking power and raw thrust. Optimal performance for general diving and alternate kicking styles such as helicopter, scissors, backwards, flutter and flog-kicks. 

We took a classic and made it better!   HOG Tech 2 Fin provides better finning control while still retaining the power that the Hog Classic tech Fin offered. We could go on for hours about the fin and how it magically makes you fly underwater, except of course it doesn't. You need to bring the buoyancy, finning technique and leg power to the table, when you do that this fin will meet your needs and translate your ability to actual diving much better than many fins on the market.  This fin is negatively buoyant in the water.     Comes standard with Spring Straps   Sizes: M (7-8), L (9-10), XL (11-12), 2XL (13-14)  

Sometimes it's best not to mess with a tried-and-true original. The EXP Fin is retro - the original monoprene blend from the 1990's - and the best choice for a high performance blade required of tech divers. Identical in shape to our former fin, the EXP brings us back to the original monoprene blend that was so successful over a decade ago.   The EXP's monoprene blend offers the best balance of power to work ratio, providing efficient finning in high flow or stiff currents. They are stiff, yet with plenty of snap. Plus they are lighterweight than traditional rubber fins meaning legs and feet won't cramp even after miles of swimming.   The blade shape is designed for a wide variety of kicks, including frog kicks, modified flutter and power kicks. The 8 1/2-inch pliable spring-heel strap allows for quick donning/doffing. A comfort heel pad and convenient, removable pull tab adds to the ease of use.   Injection molded Monoprene blade with monoprene center strip gives rigidity and flexibility for maximum performance with minimum effort. Marine grade stainless steel spring heel straps are corrosion resistant Available in sizes Small through X-Large 4lbs (1.8 kg)  NOW COMING WITH A STAINLESS STEEL BUCKLE

So fast and responsive they're scary. Precision blend of hydrodynamics and materials technology for ultimate comfort, efficiency and performance. The VIPER blade's Flexible Power Thrust Channel directs water off the tip of the blade for improved power and efficiency. The engineered channels and side rails direct water flow off the tips of the fin without allowing water to "spill" from the sides of the blade for uncompromising power and efficiency. Ideal for all diving and snorkeling skill levels Flexible Power Thrust Channel directs water off the tip of the blade for improved power and efficiency Power Vents reduce stress while accelerating water over the blade Oversized blade produces increased thrust and propulsion Generous yet streamlined foot pocket fits a wide range of boot styles while significantly reducing drag Extremely lightweight for increased performance and ease of travel Easy adjust quick-release buckles.  

Why SplitFins® deliver more propulsion with less air consumptionAll it took was watching the tail fins of fish – except that we couldn't keep up with them because our traditional fins took too much effort. Using hard kicking paddle fins can result in leg strain, fatigue and cramping. Because of the kick resistance of a paddle fin, divers often “felt” like they were moving fast. But underwater speedometers proved that these divers were actually moving relatively slow. SplitFins® deliver more propulsion with less drag and kick with less effort. Reducing the stress and strain of the kick results in greater sustained speed, power and comfort. Independent testing has also confirmed that the SplitFin® design significantly reduces air consumption. Not all SplitFins® are the same.Splitfins® come in a variety of shapes, sizes and stiffness. These contribute greatly to overall comfort and performance. A fin with short, soft blades will kick easier than a longer, stiffer one, but will require many more kicks to travel the same distance. A blade that is too stiff will require too much effort to kick comfortably. The Atomic SplitFins® were specifically designed to optimize all these variables. They are easy kicking fins that deliver high thrust, speed, and efficiency with a comfortable, low frequency kick cycle. Spring Heel StrapsA Patented Atomic Exclusive Another "rethinking" of something simple, the unique rust-resistant stainless steel springs were designed with variable pitch geometry. Divers get a more comfortable fit and easy one-hand removal, yet the springs are resistant to deformation if overstretched. Included on the "Smoke on the Water" Splitfin® and available for all Atomic SplitFins® or as a universal retrofit for other brands. The Universal Spring Straps share the same features found on Atomic Springs, but are made to fit almost any other brand of open heel fins. Available in medium and long. SplitFin® Wings “Slice” Through the WaterTraditional paddle fins work by pushing water rearward. As a paddle fin is pushed through the water, much of the water spills over the top surface of the blade and sticks to it, creating drag. Extra kicking effort is required to overcome that drag. The Atomic SplitFin® slices through the water with two wing-shaped surfaces, creating lift and forward propulsion more like a propeller. Any water traveling over the top of the blade is funneled into and out of the opening (split) between the wings. Drag is reduced, effort is reduced, and efficiency is increased.Propeller-Fin™ Technology Moves You FasterAtomic Aquatics SplitFins® use Propeller-Fin Technology to deliver ultra-high speeds with a small-range rapid flutter kick. This works in the same manner that increasing the RPM on a boat propeller accelerates a boat to high speeds. Multi-Composite Plastics And Other Uniquely Atomic FeaturesThe Atomic signature is our use of exotic materials specifically designed to improve performance. We developed multi-composite plastics for the SplitFins® to maximize the efficiency of the kick with less fatigue. Flexible side rails and a stiff foot pocket are combined with stiff battens in the blade to control the flex pattern for optimum performance. Our patented EZ-LOK Buckle System is one of those distinct Atomic features that make divers love us even more.  

Increase your power to weight ratio with our new F2 fins. If you are a traveling diver, looking to reduce weight or just favor a lightweight fin, look no further. The patented F2 is designed to add blade surface on both the downstroke and upstroke to increase your efficiency with any type of kick. The F2 is injection molded using monoprene and uses a shorter blade design which packs easy and improves agility in tight areas. Standard with adjustable stainless steel spring straps. High grade, heavy duty monoprene construction Angled strap mounts for comfort and a better transition of power Spring heel straps w/ easy-grip heel tab Multiple strap mounting positions for a fine tuned fit Vented blade to reduce stress while accelerating water over the blade Generous foot pocket with 3 sizes - Small, Regular and XL  

The RK3 HD fin is the latest in the RK3 range. It is made from a higher density material than the standard RK3, which makes the fin stiffer and heavier and is therefore the ideal fin for dry suit diving. The new, heavier compound makes it negatively buoyant and produces a stiffer blade, providing additional power in heavy currents or surf.• Based on one of the first vented rubber fins sold in North America and popular among military and professional divers.• Compact, and ultra-rugged for use in harsh environments.• Improved foot pocket with spring straps for ease of use with cold hands or thick gloves.• The design has been the standard gear issue fin for military, special ops, coast guard and public safety divers for decades.• Short wide blade provides maximum forward thrust while maintaining great maneuverability.• Vented blade design reduces resistance on the upstroke and enhances thrust on the downstroke.• The vents also eliminate vortexes that can occur along the back of the blade much in the same way split fins eliminate the vortex.• The blade material designed to hold up in the toughest environments, temperatures and abuse.• Two large grommet holes designed to fit most carabineers for easy storage of the fins• Spring straps as standard.• Custom designed buckle holds spring straps in optimum position.• 3 sizes available: Medium (7-9), Large (9-11) & Super (12+)• Colors: RK3 HD - black Fin Material Thermoplastic RubberDimensions Medium - 19.15in L x 9in WLarge - 21.5in L x 9.5in WSuper - 22.5 in L x 9.5in WWeight (pair) Medium w/ Spring Straps - 5.25 lbsLarge w/ Spring Straps – 6.25 lbsSuper w/ Spring Straps - 6.75 lbsBuoyancy All Sizes with Spring Strap - Slightly NegativeBuckle Attachment 316 stainless steel nut and boltFoot pocket Open heel designSpring straps YesVents YesColors Black

Take care of all of your gear with this Super Hanger Bundle. This bundle includes one wetsuit / drysuit hanger, one accessory hanger, and one BC hanger.  You'll be able to hang up your suit, Bc, Regulators, computers, gloves, boots, fins and anything else that you take in the water with you!   Super Hanger When the average hanger just doesn’t cut it, rely on the Super Hanger. We know your gear is often heavy and wet. So, we built the Super Hanger sturdy, with high quality non-corrosive materials. It holds more weight, so your valuable stuff won’t end up on the ground.   One piece I-beam construction for strength. Non-corroding plastic resin will not rust Supports up to 20 pounds Proudly made in the USA 16.6 inches x 1.20 inches x 9 inches (42.16 cm x 3.05 cm x 22.86 cm)   Super Accessory Hanger This unique non-corroding hanger holds gloves, booties, hood and fins for drying and storage. This unique hanger holds dive gloves, hood, booties and fins.   It allows proper drying and keeps them off the floor to prevent damage. One piece I-beam construction for strength. Non-corroding plastic resin will not rust Supports up to 20 pounds Size: 1.2 x 13 x 20 inch **Due to the awkward size of this product, you may incur additional shipping fees that will not show up in your shopping cart** Super BC Hanger   This non-corroding hanger is designed specially for holding a BC and regulator during drying and storage. This unique hanger is built specifically for hanging your expensive BC and regulator.   Raised hooks are added to the tips of the hanger shoulders to prevent the BC from sliding off. A T-hook extends from the bottom of the hanger for draping hoses from your regulator. With this hanger your equipment will dry quickly and safely off of the floor. One piece I-beam construction for strength. Non-corroding plastic resin will not rust Supports up to 20 pounds Size: 1.2 x 16 x 10 inch

The perfect combination of comfort and power for recreational divers and snorkelers.The mid-sizedblade has three channels for optimal movement of water during the kicking cycle. Ideal for travel and available in XS providing the perfect fin for both women and young divers too.Mares Plana Avanti X3 Open Heel Dive Fins Channel Thrust TechnologyWhen water spills over the sides of the blade, it reduces thrust, and decreases efficiency. Mares design was derived from observing marine mammals such as manatees in their natural environment. When swimming they bend their tail to form a channel, which optimizes thrust. When proper channeling occurs, all of the displaced water contributes to thrust.The "Channel Thrust" technology maximizes the channeling of water and moves a much greater amount of water compared to other fins of the same size. The result is greater thrusting power with the same amount of effort. Mares latest development in "Channel Thrust" technology is the new "Superchannel" design. "Superchannel" further increases the high performance level of Mares fins.

The Mako Fin is a precision blend of ergonomics, hydrodynamics and materials technology created for ultimate comfort, efficiency and performance. Precision Blend of Ergonomics, Hydrodynamics and Materials Technology Flexible Center Channel Accelerates Water Over Blade for Improved Efficiency High Performance Vents Reduce Stress Oversized Blade Produces Increased Thrust and Propulsion Generous, Yet Streamlined Foot Pocket Significantly Reducing Drag Foot Pocket Fits Wide Range of Boot Styles Extremely Lightweight for Increased Performance and Ease of Travel Easy Adjust Quick-Release Buckles 4 Sizes 6 Colors 1 Year Limited Warranty

The perfect fin for perfect power and perfect precision Features     Short, wide blade with soft arc in the center to cup the water     Slightly negative to help balance the diver     Comfortable deep footpocket to allow for use of full feet for power     4 sizes to fit all Divers (M, L, XL, XXL)     Pre Insatalled Spring Straps for easy of donning and doffing     Thick sidewalls for great backward kicking     Durable and long lasting rubber compound   Specifications     Rubber Rigid fin     Open heel with Stainless steel spring straps     4 Sizes to fits all divers     Thick tall side walls     Drain holes in foot pocket     Negatively Bouyant fin

Technical divers have long recognized the potential problems associated with fin straps that can break free from the diver’s fins or do not properly adjust with changes in depth. In such cases, divers may lose their fins - which can, in certain situations, create a particularly difficult situation to manage. Nobody wants to be left watching their fin drift into the depths of the ocean at the start of a dive, or be left stranded on a demanding and anticipated dive   Halcyon’s Spring Heels provide a more secure attachment point for your Jetfin-style fins than traditional rubber straps. The Halcyon Spring Heels come in three sizes, allowing almost all divers an easy fit.   Sizing your Spring Heels  straps can also be sized quickly and simply. Wear your bootie (dry suit or wetsuit) and place the foot into the fin pocket. Measure the distance from pin to pin behind the heel to select the appropriate size. Typically, if you are between sizes, it’s best to go down a size, unless you are sensitive about a too-snug strap.   Length of Spring Heels: Medium: 8 inch (20cm) spring Large: 10 inch (25.4 cm) spring Extra Large: 12 inch (30.5 cm) spring

The newest Atomic Aquatics SplitFin®, "Smoke on the Water" gives an exciting new look to basic black, combining opaque and semi-transparent materials together for a beautiful rich looking effect. The foot pocket and side rails of the fin are molded from our exclusive high energy polymer used in our Reef Red and Liquid Blue models. Accompanying the new look, "Smoke on the Water" is fitted with our newest innovation, the Atomic Aquatics Spring Strap. Like every product we make, our innovative design re-thinks the old and improves upon the concept. What’s unique is the "variable pitch" of the stainless steel spring (Pat.Pend). Unlike other spring straps that have a constant coil of the same diameter, our new spring straps have a variable pitch and section geometry (they change shape) in specific regions of the strap. These special shaped regions allow the spring to stretch more easily for a more comfortable fit and make them stronger to resist breakage or permanent deformation if they are over-stretched or abused. The spring straps are fitted to our patented quick release buckle system that permits simple, one handed removal or attachment. These new straps will also retrofit any existing Atomic Aquatics open heel Split Fins by simply snapping them on in place of the old straps. A large, rubber heel pad with oversized finger grip adds comfort and makes slipping them on and off quick and easy. Constructed of rust resistant type 316 stainless steel, this may be the last fin strap you ever buy.

The revolutionary design of the Oceanic Manta Ray fin was inspired directly from the shape and bio-mechanics of marine animals. By combining three different materials to simulate bone, tendon and fin, we’ve created a blade design that provides maximum power, speed & efficiency while also remaining extremely lightweight & durable. TECHNO-POLYMER BLADE Advanced materials provides the strength of bone to maximize power, speed & efficiency, while being extremely lightweight & durable. POWER-X SYSTEM This revolutionary material acts as tendon & joint, optimizing propulsion by flexing during the downstroke and releasing stored energy prior to the upstroke. POWER CHANNEL The flexible center channel simulates the elasticity of skin by directing water flow off the back of the blade for increased thrust SOFT-PAD HEEL STRAP Our newly designed heel strap has a comfortable and ergonomic finger-loop which allows the fin to be easily removed & replaced, even with thick neoprene gloves. EASY BUCKLE ADJUSTMENT (EBA) Our unique EBA buckle adjustment system allows for more than 2” (5 cm) of precise adjustments for a custom fit without tools. WINGLETS These have been positioned along the length of the blade to increase efficiency and improve maneuverability.

Sometimes it's best not to mess with a tried-and-true original. The XT Fin uses the original monoprene blend from the 1990's, and is the best choice for divers looking for a high performance blade. Identical in shape to our former fin, the XT brings us back to the original monoprene blend that has been proven and successful for over 20 years. The XT's monoprene blend offers the best balance of power to work ratio, providing efficient finning in high flow or stiff currents. The blade shape is designed for a wide variety of kicks, including frog kicks, modified flutter and power kicks. They are stiff, yet with plenty of snap and are lighter in weight than traditional rubber fins, meaning legs and feet won't cramp even after miles of swimming. The 8 1/2-inch pliable marine grade stainless steel spring-heel strap allows for quick donning/doffing. A comfort heel pad and convenient, removable pull tab adds to the ease of use. a lightweight marine grade stainless steel buckle secures the heel strap to the blade. The stainless steel buckle is a Dive Rite exclusive, and is guaranteed not to crack or break.   Technical details Injection molded Monoprene blade with monoprene center strip gives rigidity and flexibility for maximum performance with minimum effort. Marine grade stainless steel strap buckles Marine grade stainless steel spring heel straps Available in sizes Small through X-Large Small: 4.7 lbs (2.13 kg) Medium: 5.8 lbs (2.63 kg) Large: 6.2 lbs (2.81 kg) Extra Large: 6.3 lbs (2.86 kg)