!!!30-DAY UNCONDITIONAL WARRANTY!!! Face it, you need a tough and bright dive light...and plastic just won't do. So, reach for the 1000 Lumen Dive Light! Built on the same powerhouse platform as our popular 500 Lumen Dive Light(8" long with a 1.5" diameter head), this thing boasts an upgraded driver to pump out a beam for up to 5 hours that will cut through even the murkiest of waters!     Featuring a 5mm glass lens, XML T6 aluminum body, a double O-ring twist on/off activation, and the ability to be used above the surface...go ahead, put it through its paces on the toughest of dives. It will surely be up for the job.  Features:  Twist on/off switch Super big laynyar hole for bolt snap mount Alloy aluminum reflector Burn time: 7 hours Beam angle: 11 degrees.  Distance: 320m Drop Resistant:1.5m Waterproof: 150m   Dimensions: Head diameter: 46mm Body diameter: 34mm Tail diameter: 35mm Length: 210mm Weight: 285 g   The 1000 Lumen Dive Light comes complete with 3-C Cell batteries, lanyard, and O-rings.       

Introducing the DRIS 1k Shorty!!  This 1000 lumen light is extremely versatile. Great for any recreational diver diving in cold quarries/lakes or looking under a reef to see a nurse shark!  Pair it with the Soft neoprene goodman glove, and you have a hands free light that even the experience technical diver will cherish as they take this light to 450 feet.  With it's center back attach point, you can even clip this off to a D-Ring or retractor to ensure you don't lose this bright light.  The 1k Shorty is powered by only 3 AA batteries in a triangle battery back that is protected by a triple o-ring design to ensure you don't flood it.  This gives the light a 1 hour burn time at max brightness and a run time of 4 hours of usable light.  With the built in overload circuitry, you can even use this on the surface, and the light will automatically dim to help prevent damage to the LED.  You can see this light is one compact light and fits perfectly on a Compact Disc!  The scale of the main picture makes it look bigger, but it fits tip to tip right on top of a regular CD. -Lamp: CREE XML U2 LED (single) -Lumens:1000 -Burn time: Over 50,000hours on the LED life -Batteries:3x AA(Alkaline) Included -  1.5volts for other batteries used --- Light performs better with higher end batteries (lithium polymer or rechargeable) Burn tests done with Alkaline batteries -Weight: .75lbs with batteries -Size: 2.2"(Head)x1.5"(Body)x1.65"(Tail)x4.9"  -T-6061-T6 Durable Aluminum alloy, anti-corrosive anodized housing -Twisting bezel for on/off function -9 Degree Beam Angle -Waterproof to 450 feet   !!!30-DAY UNCONDITIONAL WARRANTY!!!  

The new patent pending Dive Rite Quick Release Mount will change the way you think about carrying your dive lights.  Now with ease, divers are able to switch between different lights without the need to carry additional handmounts.  Better yet, the handmount never has to come off of the diver's hand when changing lights.  With this new QRM system, divers even have the option to switch from a hand mounted light to a helmet mounted light, in just a matter of seconds.   Watch Lamar's video to see how easy this system is to use! The perfect compliment to the QRM is our new soft handmount. This is our most comfortable handmount yet. It is adjustable to fit most hands with or without gloves. Ambidextrous  it can be worn on either hand.  Two Options Available: Dive Rite Standard Striker Plate is compatible with all Dive Rite Lights Dive Rite Universal Strker Plate is compatible with Non-Dive Rite lights

The Impact Stretch Dive light is extremely versatile with the ability to switch light heads on the surface from spot to video depending on your diving needs, and diving to depths of 450 feet! With 1000 lumen brightness you’re sure to have the best view under the water.  With its center back attach point, you can even clip this off to a D-Ring or retractor to ensure you don't lose this bright light.  The Impact Stretch is powered by 3 C batteries that are protected by a triple o-ring design to ensure you don't flood it.  This gives the light a 4 hour burn time with 10 hours of usable light.  With the built in overload circuitry, you can even use this on the surface, and the light will automatically dim to help prevent damage to the LED.    The Impact Stretch is great for the recreational diver or the experienced technical diver alike.  You’ll never need another light to guide you through the water once this light is part of your gear, especially when combined with our soft neoprene goodman glove for hands free light!   Impact Spot Light Head The Impact Spot Light head is great for precise lighting.  Want to see what’s hidden away in the crevices of the quarry you’re in, or look underneath that reef to catch a glimpse of a nurse shark?  Equipping your Impact Stretch Light with the Impact Spot Light head is what you want!   Impact Video Light head For the seasoned, or aspiring underwater photographer, the Impact Video Light Head is what you’re looking for! With a wide angle beam, this light head will flood the water with light so that you get the best shot available.  The Impact Video Light Head is also great for large area illumination whether you have a camera with you or not. Lamp: CREE XML U2 LED (single) Lumens:1000 Burn time: Over 50,000hours on the LED life Batteries: 3 C Batteries Included Weight: 1.5 lb with batteries Size: 9" (22.86cm) x 1.5" (3.81cm) x 1.65" (3.81cm) T-6061-T6 Durable Aluminum alloy, anti-corrosive anodized housing Twisting bezel for on/off function Waterproof to 450 feet Divers choice of either Spot head (11 degree beam angle) or Video head (140 degree beam angle)      **Light heads only for use with Impact Stretch and Impact Stubby** !!!ONE YEAR UNCONDITIONAL WARRANTY!!!

AL1200NP: This light is similar to the Bigblue AL1200WP, but with a narrow beam angle at 10°. The AL1200NP offers great features including the 4 level push-button on/off switch, battery-level indicator, and rechargeable 18650 lithium ion battery.  Light Source:1 XML LEDLight Output:120-1200 LumensCasing Material:Aluminum alloy, anti-corrosive anodizedPower Source:Rechargeable Li-Ion 18650 BatterySafety Designs:Double o-ring sealedAngle Of Light Beam:10 degreeColor Temperature:6500KAvailable Colors:BlackBurn Time:2 hrs (level IV), 5 hrs(level III) 10 hrs(level II) 20 hrs (level I)Maximum Depth:100 Meters TestedSize:Dia. 35 x L. 145.1 mmWeight:178 g (including battery)Bouyancy:-79 g (including battery)Switching System:Push-button with battery indicatorFront Glass:Tempered optical glassLanyard:YesPackage Weight Lbs:2Sku:AL1200NP

LD-35 Primary Light The bad boy of dive lights; the LD-35 packs an awesome 3500 lumens of power! Product Description    3500 Lumen High @ 30W, 1100 Lumen Medium @ 15W, 800 Lumen Low @ 5W 8.2 degree beam angle Up to 5 hours burn-time Side and Top gland options Over heat protection for the LED’s, can be used on low out of the water Over charge, discharge, short circuit, and drain protection on the battery pack All UW Light Dude battery packs are TSA compliant for air travel   What’s in the box? Complete Light System (Head, Cable, Canister) Handle & Clip (inc. optional Hard Goodman Bracket) 2 x 316 Stainless Boltsnaps (for handle and head) Canister rigging for 2″ webbing or sidemount Charger base for Sealed External Charging System 110-240v AC Charger Battery Size(Watt Hours) 54 (Mini), 107 (Short), 160 (Tall) Output(Lumens) 3500 Beam Angle(Degrees) 8.2 Burn Time(Hrs) 1.6 (Mini), 3.3 (Short), 7.5 (Tall) Cable Gland(Routing) Side Gland, Top Gland     Due to TSA policy, UW Light dude can lights cannot be expedited by using standard air freight.  If you like to expedite it by air, extra charges will apply. 

The BX-1 handheld light is small in size and big in brightness with a 220 lumen output on an 8 degree beam angle. The light beam also gives a halo of light surrounding the concentrated beam for greater visibility. This powerful light can run on user choice of 3 AAA alkaline batteries (included), or 1 Lithium 18650 battery with included battery carrier. The double o-ring seal on the anodized aluminum body provides proven protection against flooding. The BX-1 is powered on and off with a simple twist of the head. Nylon line lanyard with barrel lock prevents accidental loss of the light by dropping it. The BX-1 handheld light is an ideal choice for a recreational primary light or technical backup light. 220 Lumens 8 Degree Beam 2.5 Hour Burn Time 10,000 Hour LED Burn Life Depth Rating: 492ft (150m) Weight: 7 oz. (.2 kg) with 3 AAA batteries Dimensions: 5in (12.7cm) length x 1.7in (4.32cm) width   Regularly check the double o-ring seal to insure it is free of debris and that the o-rings are intact. Clean o-rings should be coated with a light sheen of silicone lubricant before reassembling light. When powering the light with an 18650 lithium battery, the light will be brighter longer, but will not extend actual burn time. AAA alkaline batteries will still provide an equivalent burn time, however the light brightness will begin to taper off as the battery voltage drops.  

Focusable Lighthead   Different design than other HID's with the main ballast in the canister with the ignitor in a small housing at the head   Switch is recessed into the lid for additional protection   Powered by a 20 Amp Li-Po Battery Providing 330 Mins.(5.5 hours) of Burntime   35 Watt HID with 3000 Lumen Output @ 6000 Kelvin   New Dry Lid is completely sealed providing protection from water intrusion due to a cut cord or switch boot   Battery Canister is completely sealed preventing water intrusion due to improperly latched lid or forgotten o-ring   Dry Weight 7 lbs.(3.2kg) 3 lbs(1.36 kg) Negitive   Recharge Time from Complete Discharge 12 hours   Universal Input Charger. US Input Cord Provided, UK and European Input Cord Available   Canister and Head Machined from Solid Rod Delrin   11.5"(291mm) Length, 3.5"(88mm) Diameter   DUAL OUTPUT AVAILABLE IN 20 and 26 AMP MODELS ONLY

  A lightweight 1000 Lumen main light providing 2.5 hrs burntime in full power. Thanks to a cooling radiator on the torch’s housing, the DRIS 1000 Lumen Can Light doesn’t overheat on the surface.  You'll love the low profile battery housing that will keep you streamlined in the water.  With 4 separate power settings and a strobe feature, the DRIS 1000 Lumen Can light will provide the perfect amount of light no matter where you are diving.  Plus, it’s low weight without the batteries makes it perfect for traveling by air!  The DRIS 1000 Lumen Can Light comes standard with a hard goodman handle for easy use in the water.   Optional Battery Kit comes with 3 rechargeable batteries ( 26650  5000mAh ).    Light Source: LED CREE XML T6 LED Lifespan 50,000+ Beam Angle: 10 Degrees Color Temperature: 6000 K - 7000 K Power Supply: 4 x C batteries Cable Length: 46 inches Material: Anodized Aluminum Depth Rating: 150 meters Lumen: High: 1000 Lumens     Medium: 600 Lumens     Low: 400 Lumens     Extra Low: 200 Lumens Runtime: High:  2.5 hours     Medium: 5 hours     Low: 6.5 hours     Extra low: 12 hours Weight:  1.6 lbs Housing Dimensions: 10.5 inches x 1.5 inches Light Head Dimensions: 3 inches x 2 inches Strobe Feature: Yes (3 second hold down) Switch: Magnetically controlled push switch   !!!30 DAY UNCONDITIONAL WARRANTY!!! 

"THIS IS ONE COOL DIVE LIGHT. WEIGHS ONLY 10 OUNCES, INCLUDING THE BATTERY AND HANDS-FREE STRAP, YET IT OFFERS A CHOICE OF A POWERFUL SPOT BEAM OR A MASSIVE FLOOD BEAM, EACH WITH THREE POWER SETTINGS." -SCUBALAB TESTER'S CHOICE Featuring:• 1200 lumen flood and 500 lumen spot output certified to the FL-1 Standard• A powerful LED array using the best CREE LEDs and enhanced firmware.• Colored Status LED for battery and mode indication for easy power management.• Multiple mounts available, including Pistol Grip, T-Handle, and Kirby Morgan helmet mount Included:• Hand Strap, 2 Amp Charger

The LX25 LED Corded Primary Light brings a new level of brightness to the LX family of lights. Utilizing the latest in microprocessor technology along with the CREE XM-L2 Cool White LED chip and a new reflector, the LX25 combines maximum brightness with maximum efficiency. With 30,000 LUX at approximately 6,500 Kelvin, the LX25’s brightness out does most other corded primary lights on the market today. The LX25’s 6-degree concentrated light beam, reflecting off a polished metal reflector, punches through the water lighting the way with a clean center spot. Lighting your way through the darkness has never been so bright. Its compact design and provided quick release soft hand mount make it ideal for any type of diving requiring a good light source as well as traveling where weight matters. Built around the XM-L2 Cool White LED chip that maximizes output and efficiency, the LX25 has three modes; high power, low power, and strobe. Using our NiMH Slimline battery, the LX25 burns for 3.5 hours on high power, eight hours on low power, and 36 hours in strobe mode. Making sure each light meets the high standards it was designed under, every light is individually tested and the average LUX is measured at one meter using a Konica Minolta Chroma Meter. An integrated microprocessor control unit monitors battery voltage to keep the light operating at its peak efficiency. As battery voltage drops, light output steps down eliminating the possibility of suddenly being left in the dark due to a dead battery. The light alerts the diver of this step down in light output by a series of flashes, after which, the light produces another 1.5 hours of usable light. The Slimline nickel metal hydride battery with included Smart Charger does not contain lithium, and is not subjected to TSA travel restrictions. Activated using a rotary switch on the light head, the LX25 allows divers the ability to mount the battery canister anywhere on their equipment configuration, eliminating the need to be able to reach the canister to activate a switch. Available with a standard lid (LT6100) or 70 degree lid (LT6100-70). With a 500-foot (152 m) depth rating and no switch boot on the canister, the LX25 excels under all the rigors of diving providing proven protection against flooding. Providing reliability, durability, and a light output brightness few other lights can boast, the LX25 is the next generation of technology-driven LED lights that will take your diving to new levels whether exploring caves, penetrating wrecks, or night diving on a reef. NOTE: Do NOT plug the battery into the light head while the battery is not in the canister. Even with the light off, plugging the light in backwards with the polarity reversed can damage the light. Always use a fresh, properly charged battery to achieve rated burn times.

An intensely bright 660 Lumen 8 degree LED assembly (also available 25 and 45 degree for video and photography) with a Sartek 3-C cell Aluminum Housing, brighter than a 10 watt HID, depth rated to 1000', up to a 100,000+ hour lamp life. Burn time on C cells is 3 - 4 hours at full output and over 24 hours at reduced output. This is the toughest light you'll ever own. The Delrin head can be directly connected to the battery canister to make it a self-contained, handheld flashlight (see the EBL6600C). The body is machined from a solid rod of aluminum. Lifetime warranty against material and workmanship defects.

The After two years of development, we are pleased to announce the release of the 26W LED Primary light.light heads for the 26W LED are machined from aluminum and then black hardcoated to allow for optimal heat sinking. The Reflector was designed to provide a 6° center hot spot for effective signaling. You can get it with 3 different Canister options: --Powered by a 10Ah Li-ion battery pack (providing 230 minutes of burn time) --Powered by a 15Ah Li-ion battery pack (providing 345 minutes of burn time) --Powered by a 20Ah Li-ion battery pack (providing 460 minutes of burn time) 1700 Lumen Output @ 6000 Kelvin 9 inch (22.7cm) Length, 3 inch (7.62) Diameter Dry Weight is 4.5lbs(2kg) 1lbs(.45kg) Negative in-water Recharge time from complete discharge:  6 hours 9.0 ELC – 111wh TSA compliant for air travel   DUAL OUTPUT AVAILABLE IN 20 and 26 AMP MODELS ONLY        

The LD-35 has an 8.20 degree beam that produces 3500Lumen of light on setting one at 30 watts. Setting three can be used safely out of the water. The light will turn to setting three if it is used out of the water and it reaches maximum temperature limit. Once it falls below the temperature limit it can be returned to the higher light levels. While in the water the heat sinking will ensure the light remains well below its temperature limit.

    The king of efficiency and value, the LD-26 packs a mean 2600 lumens and with extended burn time. Product Description 2600 Lumen High @ 20W, 1100 Lumen Medium @ 10W, 800 Lumen Low @ 5W 8.2 degree beam angle Up to 7.5 hours burn-time  Side and Topgland options Over heat protection for the LED’s, can be used on low out of the water Over charge, discharge, short circuit, and drain protection on the battery pack All UW Light Dude battery packs are TSA compliant for air travel   What’s in the box? Complete Light System (Head, Cable, Canister) Handle & Clip (inc. optional Hard Goodman Bracket) 2 x 316 Stainless Boltsnaps (for handle and head) Canister rigging for 2″ webbing or sidemount Charger base for Sealed External Charging System 110-240v AC Charger     Technical Details:     Battery Size(Watt Hours) 54 (Mini), 107 (Short), 160 (Tall) Output(Lumens) 2600 Beam Angle(Degrees) 8.2 Burn Time(Hrs) 2.5 (Mini), 5 (Short), 7.5 (Tall) Cable Gland(Routing) Due to TSA policy, UW Light dude can lights cannot be expedited by using standard air freight.  If you like to expedite it by air, extra charges will apply. 

The backup light bracket is machined from Delrin® for added strength. Each kit includes a template sticker and necessary hardware for proper placement and security of the bracket to your helmet. The set screw goes in the channels along the backup light to hold it securely in place so you can turn it on and off. To mount simply place the sticker where you would like on the helmet and drill through the black holes.