Very fast shipping.
Shipped very fast. Read More
Ships FREE in the USA!
Pelagic The Pelagic boot is a lightweight comfortable warm boot. The addition of the footbed provides a stable chassis and greater comfort when finning and climbing ladders. It also makes them ideal for occasional shore diving. Features: Heavy Duty Zip and Stopper A common problem with dive boots is having the zip slide down during a dive, letting water in and making your feet cold. The heavy duty zip and in particular zip-stopper on the Amphibian and Pelagic boots reduce the risk of this happening, keeping the top of the boot tight around your ankle. Fin-strap Retainer The Fin-strap Retainer does exactly what is says, keeping the strap up on the back of your heel. This has been carefully researched and tested to work with most diving fins on the market today. The cut-away at the back of the heel minimises stress on the Achilles tendon during finning, ensuring greater comfort during longer dives. Double Layer Reinforcement Both boots have double layer reinforcement, on the top of the boot protects the foot from pressure of the fin's boot pocket and enhances comfort. It is made using recycled materials. Amphibian Hard Wearing Outsoles The Amphibian's hard wearing optimised outsole gives a superior level of grip and maximum stability. This makes it ideal for shore diving, negotiating entry to the water especially over slippery rocks. Ergonomic Footbed The Amphibian and Pelagic Boots are the only boots on the market today designed to include an ergonomic footbed/insole. This provides heel support and impact protection, arch support and cushioning underfoot. The stiff chassis enhances stability and increases comfort when climbing a ladder or shore diving carrying full kit. The midsole provides additional cushioning underfoot from impact and uneven surfaces. This incorporates a heel cup for heel support, arch support and additional protection from sharp objects underfoot. Climbing ladders in full kit is easier and it is more comfortable to stand and walk around wearing these boots due to the rigidity and support of the insole. Additional cushioning directly below the heel provides added impact protection when walking carrying dive equipment. Pelagic Hard Wearing Outsoles The Pelagic's outsole gives great grip and comfort, whilst minimising weight. This makes it ideal for travelling and boat diving, but the addition of the ergonomic insole makes the Pelagic a versatile performer, more than capable of shore diving as well.
Ships FREE in the USA!
This product has Video Review.
We introduced the SEASOFT Stealth™ boot more than 6 years ago and have continued to innovate and refine what has become a classic. Most branches of the US military, fire and law enforcement agencies around the world continue to use the SEASOFT Stealth™ boot as the best boot for military and rescue operations. We use high quality neoprene and 2 layers of TITANIUM FLAKE FOIL ™ to ensure heat retention and toughness. They feature a fin guard, zipper keeper, and a toe cap. Our customers and leading dive magazines describe them as the best diving boots ever made. A typical diver supports significant weight before entering the water. An elevated heel and arch support are crucial to providing adequate support to carry your tank, weights, BCD, and everything else that goes with it. This weight typically exceeds 100 lbs., so good footwear is very important! A flat bottom bootie puts the center of gravity on the heel. SEASOFT™ Boots elevate the heel so that the center of gravity is where it should be – on the balls of your feet and toes. This position maintains balance and control. Better control means a safer diver–the hallmark of SEASOFT™ products. Size: 3XS: 4/5 2XS: 6 XS: 7 Small :8 Medium: 9 Large: 10 XL: 11/12 2XL: 13/14
Ships FREE in the USA!
This product has Video Review.
Used by river professionals, rescue agencies and Navy SEALS, the NRS Workboot Wetshoe is the hardest-working river boot on the market today. Lace-up synthetic leather and 5-mm neoprene upper provides warmth, unmatched ankle support and a secure fit. 7-mm neoprene insole absorbs the shock of every step. Heavy-duty lug sole keeps you on your feet in varied terrain. It is a marking sole. Wear areas are reinforced with synthetic leather and rubber. When you need a water shoe that works as hard as you do, on and off the water, the NRS Workboot is your best choice. Material: 5-mm Terraprene™ neoprene upper Weight: 2.4 lbs Sole: Heavy-duty high traction lugged sole Insole: 7-mm Terraprene neoprene Closure System: Laces and hook-and loop ankle strap Synthetic leather and rubber reinforced wear areas PLEASE NOTE WHEN ORDERING: Whole sizes only Women order one size smaller 1/2 sizes order one size larger
This boot has a classic style and modern comfort. With a zippered entry and features such as the fin stop on the heel, you're sure to love diving this boot! 5mm Classic Medium Sole Zipper Boots Durable traction sole Heel cap for maximum durability Fin stop on the heel cap keeps your fin strap in place Heavy duty zipper Web entry barrier
Ships FREE in the USA!
The new Amphibian diving boots are set to redefine comfort in diving footwear. The first diving boots in the world to feature ergonomic footbed insoles, they are designed for a diver who wants the ultimate in support and protection. A stable footbed and hardwearing moulded outsole make this ideal for regular shore diving. Features 6.5mm Neoprene for Warmth Ergonomic Footbed Fin Strap Retainer Heavy Duty Zip & Stopper Double layer reinforcement Boot Features
Comfortable lining socks for full foot fins and neoprene boots. Constructed using flat lock stitching and fleece lined fabric, Finsocks minimize abrasion from full foot fins and allergy reaction to neoprene boots whilst eliminating the risk of sores or blisters from rubbing. Worn underneath neoprene boots, Finsocks help to keep the feet a little warmer and assist with the donning of a wetsuit by providing a low friction contact between the feet and the inside of the wetsuit. They are also ideal for children and young adults whose feet are still growing as they can help a pair of fins which are a little too large fit better and last longer.
The Stealth Fin Sock is a versatile piece of footwear that can be worn in a full-foot fin, in an open-heel fin, or by itself as foot protection for beach walking or other watersports. Unlike most fin socks, the Stealth has an actual rubber sol, as opposed to the printed soles o neoprene soles common throughout the industry. -3mm neoprene provides warmth and foot protection -Real rubber sole protects the feet and resists punctures -Smoothskin ankle area comfortably resist water entry -Can be worn with full-foot or open heel fins, or as separate footwear -Also great for pool training -Comes with multipurpose mesh carry bag -Available in 14 sizes
2mm nylon II neoprene with glue and blind stitched seams for a superior water seal. Airprene side panels allow for water to drain while providing protection and warmth. Redesigned to provide a better fitting, warmer dive sock.
2mm nylon II neoprene socks utilize glue and blind stitched seams for a superior water seal. Redesigned to provide a better fitting, warmer dive sock.
The Splash ¾-Cut 3mm boot is a perfect boot for warm-water diving and other aquatic activities. The boot rises high enough to protect the feet and ankles from fin straps, yet is low enough to be lightweight, cool, and comfortable. Ankle zippers make donning and doffing a breeze. -3mm neoprene is warm enough for light enough for tropical climates, yet provides adequate insulation for temperate locales -Solid rubber sole protects the feet and resists punctures -Extremely tough toe cap protect the foot from fin foot pocket -Gusseted # 10 YKK zipper keeps cold water away from ankles and makes donning and doffing simple -Comes with multipurpose mesh carry bag -Available in 12 sizes
Tough 6.5mm semi-dry boot with an extra long zipper for easy donning. The heels and toes are strengthened and the boot has an angled design for less stress while finning. Angled footbed for less strain 3-D shaped 6.5mm Neoprene Fin strap ridge Glideskin seal Extra long YKK Vislon zipper Zipper, gusset and waterproofed Rubber caps at heels and toes HexTex Inner lining BootGrip for easy donning Bonded Hi-Q Nylon thread ID-Plate
Ships FREE in the USA!
This product has Video Review.
The SEASOFT Sunrays™ are a warm water version of the Stealth™ and will deliver the same performance but in a 3 mm version with a mid-top fit! And it has the same great arch support. A soft soled bootie makes you use the small muscle groups for the kicking motion. Why? Because inside the foot pocket your foot is flexing up and down against the fin foot pocket. This causes the small muscle groups to do the work that the large muscle groups were designed to do. This causes cramps and costs you energy, speed, air and distance. All SEASOFT Boots have a hard sole that inside the fin foot pocket gives you complete control of your fins. Be more comfortable and faster because you use your thighs, calves and buttocks, the big muscle groups, to provide your power to move you through the water. Sizing: 2XS: 4/5 XS: 6/7 Small: 7/8 Medium: 9 Large: 10 XL: 11 2XL: 12 3XL: 13/14
Avid divers finally have an ergonomic boot that will stand up to their day to day dives. The Superzip Ergo Elite is designed to be ready for continuous use. The 5mm neoprene upper hugs your feet tightly to reduce water transfer and keep them warmer longer. Also, the binding on the cuff is elastic so it won’t feel like your wearing a tourniquet on your calf. The #10 YKK zipper is standard on Aqua Lung boots. We went ahead and sewed that zipper to our strongest Supratex neoprene. This will help prevent the zipper from tearing out. We also added a big size and foot graphic on the gusset behind the zipper. Making sure you have a left and a right boot might be a good idea before you leave on your trip, right? To beef this boot up, we doubled the thickness of the rubber sole, toe cap and heel cap. No longer will you stub your toe on the only rock at the beach, or have to pop blisters with your thumb nails... Gross. Features Ergonomically shaped for left and right feet. 5mm regular neoprene with elastic bound top for maximum resistance to wear and tear #10 YKK zipper with locking hook and loop tab to keep the zipper from sliding while in use 5mm Supratex neoprene zipper panel to prevent the zipper from tearing out under stress 2mm thick rubber toe and heel caps protect your boots when used heavily 10mm thick rubber sole gives your boots an extra rugged base Size and foot indicator is printed large on each boot.
The Venturer 5mm boot is a value-conscious boot that many high-level features and premium construction techniques to form a solid boot that spans many types of conditions. -5mm neoprene is warm enough for cooler waters, yet light enough for sub-tropical climates -Solid rubber sole protects the feet and resists punctures -Extremely tough toe cap protect the foot from fin foot pocket -Gusseted zipper keeps cold water away from ankles -Zipper flap seals the top of the boot and keeps the zipper up -Comes with multipurpose mesh carry bag -Available in 12 sizes
6mm nylon II neoprene utilizes glue and blind stitched seams for a superior water seal. New design provides a contoured and snug fit, creating a more comfortable and warmer boot. ZIPPER: YKK #5 self-locking and corrosion resistant zippers. Full-length zipper pocket minimizes water entry. A longer pull-tab on the heel allows you to don the boot with greater ease.
3.5mm nylon II neoprene with glue and blind stitched seams for a superior water seal. Airprene side panels allow for water to drain while providing protection and warmth. Redesigned to provide a better fitting, warmer dive boot.
Low-cut molded sole, 3.5mm nylon II neoprene with glue and blind stitched seams for a superior water seal. Airprene side panels allow for water to drain while providing protection and warmth. Redesigned to provide a better fitting, warmer dive boot.
3.5mm nylon ll neoprene. Newly designed heavier molded sole. Protective toe and heel cap. Glued and blind stitched. All edges finished with black nylon binding. #5 YKK Delrin zipper with dam. SIZES: 5 through 13 Also available in 6mm.
The Apex 6mm boot is a premium boot that features a sturdy sole that has a low profile to enhance comfort and fit into any fin foot pocket on the market. Designed for cold water diving, the Apex is also an excellent selection for non-diving watersports. -6mm neoprene for warmth -Solid rubber sole is strong enough to resist punctures from shells or even broken glass -Light gray foxing strap across the top of the foot adds lateral stability, even when the boot is wet -Extremely tough heel and toe caps protect the foot from fin foot pockets -Heel lug holds fin strap in place -Gusseted zipper keeps cold water away from ankles -Zipper flap seals the top of the boot and keeps the zipper up -Comes with multipurpose mesh carry bag -Available in 14 sizes
6.5mm nylon II neoprene utilizes glue and blind stitched seams for a superior water seal. New design provides a contoured and snug fit, creating a more comfortable and warmer boot. ZIPPER: YKK #5 self-locking and corrosion resistant zippers. Full-length zipper pocket minimizes water entry. A longer pull-tab on the heel allows you to don the boot with greater ease.
3.5mm nylon II neoprene utilizes glue and blind stitched seams for a superior water seal. New design provides a contoured and snug fit, creating a more comfortable and warmer boot. ZIPPER: YKK #5 self-locking and corrosion resistant zippers. Full-length zipper pocket minimizes water entry. A longer pull-tab on the heel allows you to don the boot with greater ease.
Setting the trend in watersports footwear. The Neo Classic boot features a heavy-duty molded sole designed to withstand the rigors of diving on rocky coastlines and provide unparalleled stability on sandy beaches and boat decks as well. Virtually impenetrable molded sole with non-slip tread, superior arch support and stress reducing heel air bubble Reinforced pull tab and rear seam eliminate stress on neoprene when donning 5 mm double-glued and blind stitched neoprene construction for longevity and reduced water flow Velcro zipper flap ensures that the zipper will stay closed securely during the dive
A perfect choice for any diver. The Venture boots are designed to work equally well on boat decks or slippery rocks, and the 5mm neoprene will keep your feet cozy-warm throughout a day of diving. Molded sole with non-slip tread 5mm double-glued and blind stitched neoprene construction for longevity and reduced water flow Corrosion-proof zipper.
Features: The perfect medium-weight liner for EVO3 and Altera Boots. 3mm Titanium neoprene material is stretchy and comfortable. Ribbed sole with molded toe and heel caps adds durability. Polyethylene shank sole offers flexibility and mobility. Insulating internal SoftBoots come standard with all ShellSock-equipped suits except the Nexus II.