815 267 8400

Hoses

Scuba Hoses - Best Dive Hoses at Discount Prices - Dive Right In Scuba

Inspect Scuba hoses regularly, and replace any that display excess wear. Here, you’ll find a wide array of hoses to suit your needs; keep a few extras on hand, and you’ll always be prepared for the unexpected.

Set Ascending Direction

26 Item(s)

per page
  • Double Braided Kevlar High Pressure Hoses
    $20.99

    DRIS Dive Gear

    Double Braided Kevlar High Pressure Hoses

    41 Review(s)

     This hose is made of an outer polyester braided cover that is overlaid with a woven Kevlar.  The Kevlar makes this hose much more durable than the low pressure variant, but also a little less flexible. Rated and tested to 5000psi with a burst pressure of 22000psi, it is going to hold for you even if you tie it in a knot! The 7/16" chrome plated brass HP fittings screw into either your first stage or pressure gauge with no issues and a perfect mate.  These do NOT come with a High Pressure spool that is required for it to work.  The gauge you buy should come with the appropriate spool to use with this hose.   Tie it in a Knot, and it STILL works!!!

  • This product has Video Review.

    MiFlex Hoses- Low Pressure Regulator hose
    $35.95

    XS Scuba

    MiFlex Hoses- Low Pressure Regulator hose

    56 Review(s)

    Extreme Abrasion Resistance MIFLEX regulator hoses feature an external nylon safety braiding designed to outperform and outlive traditional rubber hoses Patent-pending MIFLEX double braiding design Polyurethane compound liner Polyester inner layer with nylon outer layer braiding Fittings and sleeves of UNI EN12164 CW 614N chrome plated brass MIFLEX braided hoses are tightly bound and fixed to the hose core by brass sleeves Double braiding also resists UV rays out of the water, extending the life span of the hose Oxygen cleaned and tested at the factory Lightweight and Flexible More than 30% lighter in weight when compared to rubber hoses of the same length Kink-resistant design Tie an MIFLEX hose into a tight knot and the flow of air remains continuous through the hose Manufacturing Made in Italy Minimum burst pressure exceeding 250 BAR (over 3600 psi) more than twice that of most rubber hoses Automated assembly and testing lines designed and manufactured exclusively for MIFLEX Each and every MIFLEX hose is subjected to more than 30 individual performance and safety tests Certified and tested to EN250 Standard Fitting have 5.2 mm internal bore Hose diameter – External 12 mm, Internal 6.5mm Premium packaging doubles as a water-resistant document wallet   Color and Length Availability Color Available Lengths in Inches Black: All Lengths Available Blue: 26", 30", 36", 40", 84" Carbon: 30" Pink: 30" Purple: 30" Red: 30" White: 30" Hi-Vis Yellow: 30", 36", 40", 84" Mellow Yellow: 36", 40" Green: 40"

  • Double Braided Low Pressure Hoses
    $16.95

    DRIS Dive Gear

    Double Braided Low Pressure Hoses

    57 Review(s)

    These hoses are tested to 1500PSI and have a minimum burst pressure of 6000psi which is well above the pressure that will go thru it for your regulator.  These work with all breathing gases and have are made with a TPU/ Nylon/Polyester blend.   CE EN250 rated with chrome plated brass fittings for a durable and strong connection.  Available in multiple sizes and colors in the dropdown box below.  

  • Low Pressure Hoses
    $24.00

    XS Scuba

    Low Pressure Hoses

    43 Review(s)

    Pick your Hose length. Custom Hoses available upon request. Dont hesitate to ask

  • High Pressure Hoses
    $24.00

    XS Scuba

    High Pressure Hoses

    32 Review(s)

    Not all rubber hoses are created equal. Go with the quality difference and choose XS Scuba rubber hoses. Our hoses are designated with our logo on the fitting and a date code so you will know the age of the hose. Gauge High Pressure Hose Lengths: 6", 22", 24", 26", 32", 36", 42"(7/16"-20 UNF Male to 7/16"-20 UNF Female)

  • Double Braided QD Low Pressure Hoses
    $19.95

    DRIS Dive Gear

    Double Braided QD Low Pressure Hoses

    1 Review(s)

    These hoses are tested to 1500PSI and have a minimum burst pressure of 6000psi which is well above the pressure that will go thru it for your regulator.  These work with all breathing gases and have are made with a TPU/ Nylon/Polyester blend.   CE EN250 rated with chrome plated brass fittings for a durable and strong connection.  Available in multiple sizes and colors in the dropdown box below.   Durable braided low pressure hose TPU/Nylon/Polyester Working pressure 1,500 psi Burst pressure 6,000 psi Available in most popular sizes  

  • Hose Clip Retainer
    $2.75

    Dive Rite

    Hose Clip Retainer

    32 Review(s)

    If you don’t have the time or patience for tying knots then, the Hose Clip Retainer is the solution. This re-usable bungee with tab can be used to secure a bolt snap to a hose, a gauge or a light. Simply thread the bungee loop through the eyelet of a snap, stretch around the hose, and bring the bungee loop over the tab. Keep a dozen of these in your dive kit; you’ll be surprised how quickly your dive buddies “borrow” them never to return.

  • Miflex HIGH Pressure Hoses
    $46.95

    XS Scuba

    Miflex HIGH Pressure Hoses

    24 Review(s)

    Upon request from divers that prefer a stiffer and a more robust HP hoses than the Miflex Xtreme-hi range, but with more flexibility than the traditional rubber hoses, Miflex has developed a new high performance HP hose. - 8mm Thin - 35% thinner than rubber hoses - Lightweight - Half the weight of rubber hoses - New Electroless nickel-plated brass fittings - Factory cleaned and Nitrox ready - Carbon Color Aimed for divers who perform expeditions where contact with rocks and wrecks are more frequent, Miflex offrs the new Carbon HD hose, with a larger outside diameter and electroless nickel plated fittings. Carbon HD high pressure hoses are approved according to the EN250 standard. Standard fitttings: M 7/16" UNF, F 7/16" UNF Working Pressure: 300 Bar Outside Diameter: 7.5mm Test Results Burst Test Pressure: > 2,500 Bar (EN250 requirement >1250 Bar) Pull-out test: > 250kg (EN250 requirement >100Kg)

  • Easy Gripper Hose Hat
    $3.00

    XS Scuba

    Easy Gripper Hose Hat

    17 Review(s)

    Do you find it difficult to Connect/Disconnect your BCD Low Pressure Inflator Hose? Not to worry anymore with XS Scuba's Easy QD Gripper. Easy to install in seconds this Rubber QD Gripper with its wide easy to Grip Collar gives a Positive Grip and makes your QD Coupling Easier to Operate, even when Wearing Gloves! Easy QD Gripper has a flat side to prevent clearance issues and it fits over most standard Quick-Disconnect Hose Ends. XS Scuba Easy QD Gripper Make QD Coupler Easier to Operate Helps when Wearing Thick Gloves Wide, Easy to Grip Collar Material: Rubber Flat Side to Prevent Clearance Issues Fits over Most Standard Quick-Disconnect Hose Ends

  • MiFlex BC Quick Disconnect Hoses
    $41.95

    XS Scuba

    MiFlex BC Quick Disconnect Hoses

    17 Review(s)

    Extreme Abrasion Resistance MIFLEX hoses feature an external nylon safety braiding designed to outperform and outlive traditional rubber hoses Patent-pending MIFLEX double braiding design Polyurethane compound liner Polyester inner layer with nylon outer layer braiding Fittings and sleeves of UNI EN12164 CW 614N chrome plated brass MIFLEX braided hoses are tightly bound and fixed to the hose core by brass sleeves Double braiding also resists UV rays out of the water, extending the life span of the hose Oxygen cleaned and tested at the factory Lightweight and Flexible More than 30% lighter in weight when compared to rubber hoses of the same length Kink-resistant design Tie an MIFLEX hose into a tight knot and the flow of air remains continuous through the hose Manufacturing Made in Italy Minimum burst pressure exceeding 250 BAR (over 3600 psi) more than twice that of most rubber hoses Automated assembly and testing lines designed and manufactured exclusively for MIFLEX Each and every MIFLEX hose is subjected to more than 30 individual performance and safety tests Certified and tested to EN250 Standard Fitting have 5.2 mm internal bore Hose diameter – External 12 mm, Internal 6.5mm Premium packaging doubles as a water-resistant document wallet

  • BC Hoses - Various Lengths
    $24.00

    XS Scuba

    BC Hoses - Various Lengths

    11 Review(s)

    BC Quick Disconnect hoses in various lengths.

  • Miflex DS "Dual Swivel" Regulator Hoses
    $74.95

    XS Scuba

    Miflex DS "Dual Swivel" Regulator Hoses

    3 Review(s)

    Miflex DS Regulator Hoses Are you tired of feeling like your hose is trying to push your regulator out of your mouth? Get the new Miflex DS "Dual Swivel" hose and take comfort and flexibility to a new level. Increase comfort and reduce jaw fatigue Low profile male swivel on the first stage end rotates 360º to prevent hose twisting when taking your scuba rig on and off Swivel ball joint on the second stage end eliminates the push and pull of your mouthpiece Overall length = 28 in / 71 cm Chromed brass construction Nitrox compatible

  • This product has Video Review.

    EZ QD Adapter
    $17.99

    XS Scuba

    EZ QD Adapter

    15 Review(s)

    Converts any low pressure hose into a Quick Disconnect hose.  This EZ QD adapter also never has to have the collar pulled back to put it on.  Just push it on...its that easy!  

  • LP to Inflator Adaptor
    $23.50

    Dive Rite

    LP to Inflator Adaptor

    2 Review(s)

    This Low Pressure to Inflator adaptor will add a low pressure inflator connection to any LP hose.  A must for any dive kit to ensure you have a back up inflator hose for you BC or Drysuit!!

  • Ships FREE in the USA!

    Miflex Hookah Hose
    $169.95

    XS Scuba

    Miflex Hookah Hose

    MIFLEX hoses feature an external nylon safety braiding designed to outperform and outlive traditional rubber hoses Two styles: Regulator low pressure and BC quick-disconnect hoses Patent-pending MIFLEX double braiding design Polyurethane compound liner Polyester inner layer with nylon outer layer braiding Fittings and sleeves of UNI EN12164 CW 614N chrome plated brass MIFLEX braided hoses are tightly bound and fixed to the hose core by brass sleeves Double braiding also resists UV rays out of the water, extending the life span of the hose Lightweight and Flexible More than 30% lighter in weight when compared to rubber hoses of the same length Kink-resistant design Tie an MIFLEX hose into a tight knot and the flow of air remains continuous through the hose Manufacturing Made in Italy Minimum burst pressure exceeding 250 BAR (over 3600 psi) more than twice that of most rubber hoses Automated assembly and testing lines designed and manufactured exclusively for MIFLEX Each and every MIFLEX hose is subjected to more than 30 individual performance and safety tests Certified and tested to EN250 Standard Fitting have 5.2 mm internal bore Hose diameter – External 12 mm, Internal 6.5mm  

  • 90 Degree Right Angle "Underarm" Adapter
    $26.95

    XS Scuba

    90 Degree Right Angle "Underarm" Adapter

    4 Review(s)

    Make any primary regulator more comfortable while diving Routes the hose under the right arm instead of over the shoulder Often used on octopus to improve hose routing Installs between the second stage and the regulator hose Chromed brass construction Low pressure use only - below 200 psi Factory cleaned - Viton o-rings

  • Hose Mount Retractor
    $28.00

    Akona

    Hose Mount Retractor

    Hose Mount Retractor for compass or dive computer

  • Ships FREE in the USA!

    Doubles Hose Kit
    $120.00

    DRIS Dive Gear

    Doubles Hose Kit

    Kit includes: 7' Primary hose, 22" Secondary hose, 24" SPG hose, 40" Stage bottle primary, 6" Stage bottle SPG,

  • HP Hose QD Adapter
    $62.95

    XS Scuba

    HP Hose QD Adapter

    1 Review(s)

    Add to any pressure gauge, console or air integrated console which uses a standard high pressure hose Remove your gauges for safe storage Bayonet mount style quick-connect (push and turn) Gauge attachment end has 7/16-20 female threads Hose attachment end has 7/16-20 male threads Airspool with Viton o-rings included Brass construction with black chrome finish

  • ScubaPro QD Adapter
    $21.95

    XS Scuba

    ScubaPro QD Adapter

    8 Review(s)

    Convert any standard regulator hose to a "ScubaPro Style" QD hose Installs to the second stage end of a regulator hose Chromed brass construction Oxygen clean with Viton o-rings Compatible with: - Tusa Duo Air - ScubaPro Air 2 - Atomic SS1

  • Inflator Hose
    $47.00

    Genesis

    Inflator Hose

    1" Corrugated Hose

  • 3/8 Male to 7/16 Female Adapter
    $5.99

    Trident

    3/8 Male to 7/16 Female Adapter

    The AA51 3/8 Male to 7/16 female Scuba Hose Adapter allows you to connect a 7/16 hose to a first stage with 3/8 ports.     Marine plated chrome brass makes it durable and built to last     Equipped with O-ring     Great addition to any Save a dive kit

  • Oceanic Style QD Hose Adapter
    $21.95

    XS Scuba

    Oceanic Style QD Hose Adapter

    1 Review(s)

    Convert any standard regulator hose to a "Oceanic Style" QD hose Installs to the second stage end of a regulator hose Chromed brass construction Low pressure use only - below 200 psi Factory cleaned - Viton o-rings Compatible with: Oceanic Air XS, Aeris Air Link, Zeagle Octo Plus, Beauchat Venturi. It also works on Viking drysuits for those that want to use a standard Low Pressure hose, and make it a QD for their Viking Drysuit.

  • Connection hose
    $10.10

    Divesoft

    Connection hose

    2 Review(s)

    Connection hose for use with professional, standard or inflator flow limiters.

  • Seaquest QD Hose Adapter
    $21.95

    XS Scuba

    Seaquest QD Hose Adapter

    1 Review(s)

    Convert any standard regulator hose to a "SeaQuest Style" QD hose Installs to the second stage end of a regulator hose Chromed brass construction Low pressure use only - below 200 psi Factory cleaned - Viton o-rings Compatible with: SeaQuest Air Source, US Divers Air Mic  

  • Pony Gauge Adapter - Straight
    $6.99

    H2Odyssey

    Pony Gauge Adapter - Straight

    1 Review(s)

    The H2Odyssey Straight Pony Gauge Adapter allows for the H2Odyssey 1" PSI and BAR SPG to be attached to a high Pressure Hose. Attaches a pony gauge to an HP hose Straight angle For use with H2Odyssey 1" PSI and BAR SPG

 
 

Set Ascending Direction

26 Item(s)

per page