Dry Suits Undergarments - Stay Comfortable No Matter How Bad Conditions Are w/

This Arctic Package includes the Arctic Top, Bottom,optional  Socks, and bag. EXTREME PERFORMANCE The Arctic is one of the highest performance undersuits in scuba diving. Constructed using a unique combination of low volume, high insulation materials, the Xerotherm Arctic’s two layer structure creates a microclimate next to the skin, maximising the retention of body warmth during a dive. Using high density fleece, the Xerotherm Arctic holds air next to the skin and wicks away moisture from suit leaks or perspiration to maintain a dry zone next to the skin. The outer layer is high stretch, abrasion resistant material, which will not interfere with the operation of auto dump valves, and will not cause air to be trapped. FUNCTION The Arctic will also continue to perform when wet. In situations even when a drysuit has flooded, the Arctic continues to provide thermal protection. The suit is designed to maximise fit and performance, giving snug protection to the body, including the feet. The Arctic is fully machine washable VERSATILITY Suitable for wearing underneath neoprene or membrane drysuits, the Arctic, can be used in conjunction with the Xerotherm base layer to provide extra protection for the most extreme diving conditions. (link to layering system page)   Fourth Element’s drybase and Xerotherm products are designed to be used in concert with each other in a layering system. This enables selection of a thermal protection which is appropriate to a wearer’s drysuit and the environmental conditions.

This garment is manufactured to the same specifications as the Exotherm 2, but is a two piece farmer john bib pants and zippered jacket. The “layering “ around the torso “core area” provides greater thermal barrier. Recommended for diving in temperate climate with air temperature from 75 degrees F to 30 degrees F and water temperature from 65 degrees F to 40 degrees F.   Features: 2 piece garment. Jacket has 2 outer pockets and one inner pocket. Pants have 2 outer pockets. Colors: Has two colored top and black pants with colored leg panel.   *Upgrade to Thermolux II to receive an additional 4 oz lining of Thermolite.* **Takes approximately 4 weeks to be built from the manufacturer

Premium Set: Heated Vest + Connector + Heated Gloves   Heated Vest   Outstanding heated vest made from breathing materials. Keeps you warm and comfortable while heating even when the batteries are low or completely drained. New generation of heating wire covered with ultra-soft, silicone isolation resistant to breaking. Innovative, synthetic power cable resistant to high temperatures and cuts.   Available sizes:
 XS, S, M, L, XL, XXL, XXXL.     Heated Gloves   The Heated Gloves are designed as a part of the complex heating system consisting of the gloves, thermovalve/connector and an external battery canister. This configuration allows a diver to wear the gloves under the dry gloves without additional valve and dangers associated with internal batteries.   Available sizes:
 XS (7), S (8), M (8,5), L (9), XL (9,5), XXL (10). maximum heating temperature 40°C, heating power: 30 W (pair), made of breathable fabric, keeps you warm even when the heating is off, evenly distributed heating wiring that allows for freedom of movements in palms, easy connection to SANTI heated vest and undersuit, CE certified.     Drysuit Connector   Drysuit inflation valve connector is designed to be used with SANTI heating system products. This adapter takes an external standard E/O connector through a standard suit inflation valve and provides power connection to a heated product under the drysuit.   Features: includes E/O cord to connect with the battery and waterproof plug compatible with SANTI heating system products, works with power supply no higher than 12V, total length of the cables including plugs – about 55 cm, height without thread – 19 mm, „APEKS” and „SI-TECH” screw size, CE certified.

This one piece, bamboo fiber base layer, is ideal under any of our undergarments for excellent moisture wicking performance. The MK0 can also be worn as a stand alone layer in tropical conditions. Features: Bum zipper Ankle stirrups Thumb loops Construction: Environmentally friendly production process. Additional Spandex content results in extreme stretch for a better fit. Materials: Breathable, moisture wicking, Bamboo blended material. Antimicrobial Odor resistant Easy care Stock Sizes only.  No custom cut needed. Click here for the size chart

Probably the world's best selling thermal undergarment is now available in a simple one piece option. Featuring the innovative two layer technology pioneered by fourth element, the One Piece Arctic provides a simple solution to the challenges of thermal protection. (Ice)Field Tested by Divers Backed by years of field testing by the Norwegian Navy, the British Antarctic Survey Dive Team, the French Marines and the Danish Navy, the Arctic was designed using high technology fabrics and has been tested in real diving conditions from the Arctic to the Antarctic. Total Versatility Use the Arctic on its own in moderate waters, and in a layering system with Xerotherm in cold waters. This is the most versatile undergarment on the market.

This Arctic Package includes the Arctic Top, Bottom, optional Socks, and bag. EXTREME PERFORMANCE The Xerotherm Arctic is one of the highest performance undersuits in scuba diving. Constructed using a unique combination of low volume, high insulation materials, the Xerotherm Arctic’s two layer structure creates a microclimate next to the skin, maximising the retention of body warmth during a dive. Using high density fleece, the Xerotherm Arctic holds air next to the skin and wicks away moisture from suit leaks or perspiration to maintain a dry zone next to the skin. The outer layer is high stretch, abrasion resistant material, which will not interfere with the operation of auto dump valves, and will not cause air to be trapped. FUNCTION The Arctic will also continue to perform when wet. In situations even when a drysuit has flooded, the Xerotherm Arctic continues to provide thermal protection. The suit is designed to maximise fit and performance, giving snug protection to the body, including the feet. The Xerotherm Arctic is fully machine washable VERSATILITY Suitable for wearing underneath neoprene or membrane drysuits, the Xerotherm Arctic, can be used in conjunction with the Xerotherm base layer to provide extra protection for the most extreme diving conditions. (link to layering system page) Fourth Element’s drybase and Xerotherm products are designed to be used in concert with each other in a layering system. This enables selection of a thermal protection which is appropriate to a wearer’s drysuit and the environmental conditions.        

Heated Gloves   The Heated Gloves are designed as a part of the complex heating system consisting of the gloves, thermovalve/connector and an external battery canister. This configuration allows a diver to wear the gloves under the dry gloves without additional valve and dangers associated with internal batteries.   Available sizes:
 XS (7), S (8), M (8,5), L (9), XL (9,5), XXL (10). maximum heating temperature 40°C, heating power: 30 W (pair), run time:
 ü  SANTI battery 6 Ah / about 2,5h of heating,
 ü  10 Ah battery / about 4 hours of heating,
 ü  20 Ah battery / about 8 hours of heating, made of breathable fabric, keeps you warm even when the heating is off, evenly distributed heating wiring that allows for freedom of movements in palms, easy connection to SANTI heated vest and undersuit, CE certified.  

  When your diving takes you to cold water, a heater vest becomes as essential as the correct mix in your breathing gas.  Light Monkey offers several options for adding a heater undergarment to any existing drysuit.  Heater Base Total Power Draw - 40 Watts  Available in sizes extra-small through triple extra-large.   Machine wash inside-out with warm water and mild detergent, and hang to dry. Do not tumble dry or dry-clean. Do not bleach. Outer shell is 95% Polyester, 5% Rubber, inside is 100% Polyester. Our heated undergarment is designed to be worn as a base layer, allowing additional layers to be added as needed. So, whether ice diving in the arctic or decoing in a Florida spring's cavern, this shirt will add minimal bulk to your current dry suit setup. Collaborated and sewn by DTEK in Italy utilizing a ZeroWind® membrane, makes the outer shell windproof and water resistant. The inside is breathable and wicks away moisture from the skin, guarding against more rapid heat loss while in the water. Two thermal pads, each drawing 20W of power, for a combined 40W of unparalleled efficiency. Unlike traditional heater vests, these thermal pads use a silicone-insulated, carbon fiber heating element instead of wire, so they won't bend and short out over time. The thermal pads plug into your heater bulkhead using an o-ring sealed push-locking connector. When you're ready to wash your undergarment, the thermal pads are completely removable through two zipper panels inside the shirt. Heated base layer tops are sewn by our friends at DTEK in Italy, and final assembly takes place in our Lake City headquarters here in the United States. Shirts are available in sizes extra-small through triple extra-large. Machine wash inside-out with warm water and mild detergent, and hang to dry. Do not tumble dry or dry-clean. Do not bleach. Outer shell is 95% Polyester, 5% Rubber, inside is 100% Polyester.

  Arctic Expedition - Extreme Performance Undersuit     The ARCTIC EXPEDITION brings our knowledge of performance fabrics and biomapped design together to create a new undersuit in our EXPEDITION SERIES. Using strategically placed additional layers of high density fleece and wind and waterproof fabrics to protect critical areas of the body that experience greater exposure during the dive, the biomapping technology maximises thermal protection whilst minimising bulk, allowing greater freedom of movement and comfort throughout the dive.     Arctic Expedition One Piece (unisex) The one piece Arctic Expedition features zipped handwarmer pockets and elesticated waist portion to ensure snug comfortable fit. The suit is pre-drilled for using p-valves.   Features:   Retractable Thumbloops Unique thumbloops prevent the sleeves riding up when donning the drysuit, but retract to prevent them being caught in the wrist seals.   Zipped Hip Pocket A zipped hip pocket is positioned for ease of access whilst wearing a cross zip drysuit, without needing to remove the suit and is ideal for carrying a key.   Unique Fabrics The outer fabric is protected with a ceramic print to minimize any effect of abrasion from the inside of drysuits, and waterproof fabric provides further protection to the knees and seat.   Handwarmer Pockets Handwarmer pockets on the leggings provide added comfort. Pre-drilled for p-valves.  

Diving Socks - Thermal Protection for Your Feet Protect the extremities. That’s what one of the Arctic or Antarctic explorers said, and it's true that if your feet get cold on a dive, concentration can waver and an otherwise fantastic dive can be marred by discomfort.   HOTFOOT PRO: With three layers of insulating fleece protecting the soles of your feet from the cold ground or boat deck, and a water resistant outer layer extending to mid calf, these are the warmest socks in our range.  

Heated Vest   Outstanding heated vest made from breathing materials. Keeps you warm and comfortable while heating even when the batteries are low or completely drained. New generation of heating wire covered with ultra-soft, silicone isolation resistant to breaking. Innovative, synthetic power cable resistant to high temperatures and cuts.   Available sizes:
 XS, S, M, L, XL, XXL, XXXL.   Features: safety switch preventing from overheating and too strong current, maximum heating temperature 45°C, heating power: 55 W, run time:
 6 Ah SANTI battery / 1,2 - 1,5 hours of heating,
 10 Ah battery / 2 – 2,5 hours of heating,
 20 Ah battery / 4-5 hours of heating, made of BZ200 (210g/m2) Thinsulate™, new generation of heating wire covered with ultra-soft, silicone isolation resistant to breaking, innovative, synthetic power cable resistant to high temperatures and cuts, new, more ergonomic nesting and wire layout inside, special vest bag included, CE certified.

This is the core layer of our Glacier Undergarment system. Whites best-selling thermal management system for dry suits can also be worn as stylish dive wear. Features: Breathable, moisture-wicking, high loft, insulating polypropylene Polar Fleece lining StormProof 70 denier micro-ripstop water resistant Taslon nylon facing Zip-off Storm Hood with adjustable ladder locks and shock cord Lycra internal hood flap with cinch-tight adjustable face seal StormShield face guard with fleece liner Fleece-lined stand-up collar Zip-off sleeves; convert Jacket to a vest Removable sleeves fit both Jacket and John 2 zippered vertical chest pockets 2 large fleece-lined handwarming pockets Elasticized waistband with fleece facing Tuck-in thumbloops for easy donning Non-magnetic construction throughout Non-corroding Vislon zippers throughout This is the ultimate dry suit undergarment system, perfect for our shell and hybrid dry suits. Complement this with the MK2 Base John, or layer with the MK1 undergarments for colder conditions.

Arctic Expedition - Extreme Performance Undersuit     The ARCTIC EXPEDITION brings our knowledge of performance fabrics and biomapped design together to create a new undersuit in our EXPEDITION SERIES. Using strategically placed additional layers of high density fleece and wind and waterproof fabrics to protect critical areas of the body that experience greater exposure during the dive, the biomapping technology maximises thermal protection whilst minimising bulk, allowing greater freedom of movement and comfort throughout the dive.     Mens Arctic Expedition Top With warm, water resistant chest panel and sleeve panels, the Arctic Expedition top combines biomapped enhanced insulation with practical considerations for the dive. The windproof chest panel eliminates the rush of cold air when pressing the chest inflate valve. The bungee cord thumb loops ensure that the sleeves do not ride up when donning the drysuit, but retract to prevent them becoming trapped in the wrist seals.     Features:   Retractable Thumbloops Unique thumbloops prevent the sleeves riding up when donning the drysuit, but retract to prevent them being caught in the wrist seals.   Zipped Hip Pocket A zipped hip pocket is positioned for ease of access whilst wearing a cross zip drysuit, without needing to remove the suit and is ideal for carrying a key.   Unique Fabrics The outer fabric is protected with a ceramic print to minimize any effect of abrasion from the inside of drysuits, and waterproof fabric provides further protection to the knees and seat.   Handwarmer Pockets Handwarmer pockets on the leggings provide added comfort. Pre-drilled for p-valves.

The Thermocline neutrally buoyant system represents an evolution in thermal protection, using state of the art materials to maximize performance without compromising on comfort. The Thermocline neutrally buoyant wetsuit system comprises the long sleeved top and the "explorer" giving the equivalent protection to a 3mm wetsuit but weighing less than 1kg (2.2 lbs). Thermocline also provides a real solution for people who suffer from neoprene allergies by eliminating contact between the skin and the wetsuit.    Get the thermal performance of a 2mm neoprene suit, without the neoprene. This is the ultimate warm water-wetsuit. Neutrally buoyant, machine washable, breathable, lightweight and hypoallergenic, the Thermocline full suit combines our experience with high technology fabrics and design with our passion for diving to provide a more comfortable and convenient diving experience. The comfort is not limited to the dive however. The breathable fabric ensures that the wearer is more comfortable when fully kitted up and waiting to get into the water. Weighing less than 1kg, the suit is ideal for travelling divers, keen to keep baggage to a minimum. It is fully machine washable so can easily be kept fresh and clean between trips. The suit is neutrally buoyant, allowing less lead to be worn and it dries quickly, even during the surface interval.

Thermal Fusion, a high performance diving undergarment, maximizes warmth, and provides unrivaled flexibility and fit. Designed by divers, the Thermal Fusion was rigorously tested by professionals to ensure the highest level of comfort and warmth. Proven by science, independent laboratory tests by the Sport Innovation Center (SPIN) validate the superior insulation value of the Thermal Fusion. Cold water immersion and controlled cold weather environmental tests determined effectiveness in protecting skin and core temperatures. Comparative testing against our competitor’s top rated undergarment confirms superiority. The science proves that the Thermal Fusion performed best overall in preventing heat loss in extreme environments.

EXTREME PERFORMANCE The Xerotherm Arctic is one of the highest performance undersuits in scuba diving. Constructed using a unique combination of low volume, high insulation materials, the Xerotherm Arctic’s two layer structure creates a microclimate next to the skin, maximising the retention of body warmth during a dive. Using high density fleece, the Xerotherm Arctic holds air next to the skin and wicks away moisture from suit leaks or perspiration to maintain a dry zone next to the skin. The outer layer is high stretch, abrasion resistant material, which will not interfere with the operation of auto dump valves, and will not cause air to be trapped. FUNCTION The Arctic will also continue to perform when wet. In situations even when a drysuit has flooded, the Xerotherm Arctic continues to provide thermal protection. The suit is designed to maximise fit and performance, giving snug protection to the body, including the feet. The Xerotherm Arctic is fully machine washable VERSATILITY Suitable for wearing underneath neoprene or membrane drysuits, the Xerotherm Arctic, can be used in conjunction with the Xerotherm base layer to provide extra protection for the most extreme diving conditions. (link to layering system page) Fourth Element’s drybase and Xerotherm products are designed to be used in concert with each other in a layering system. This enables selection of a thermal protection which is appropriate to a wearer’s drysuit and the environmental conditions.