815 267 8400

Diving Equipment

Military Dive Gear | Military Scuba Gear | Diving Equipment | Dive Right In Scuba | www.diverightinscuba.com

Gear for the Public Safety Diver!

Set Ascending Direction

Items 1 to 32 of 60 total

per page
Page:
  1. 1
  2. 2
  • Ships FREE Worldwide!

    SAR BC
    $1,499.95

    Zeagle

    SAR BC

    The SAR BC, along with the 911 BC, was introduced in 1997 in response to many requests from Public Safety divers for systems designed to fit their needs. The SAR BC is identical to the 911, except for the addition of a permanently installed lifting harness for helicopter, cliff, or swiftwater work. It is based on the Tech BC platform, with a twin buckle front closure, but has additional features. These include SOLAS standard symbols on buckles, reflective trim on the bladder, additional D-rings, pockets for long octopus hose storage on each bladder wing, and an included split saddle harness. The SAR has been proven to be a durable and flexible platform by a large number of public safety and military agencies in the US and abroad. Contact your Zeagle dealer for more information. Click here to download a printable PDF Data Sheet Click here to view an instructional video on how to re-thread the ripcord PFS sizing system Single or twin cylinder capability Two double pull waist buckles in front 1050 Denier Ballistic Nylon 65-LB lift Ballistic bladder 36-LB capacity Ripcord weight system 20-LB capacity rear trim weight pockets Adjustable Sternum Strap Four D-rings on shoulders,two adjustable 11" spaced grommets for mounting twin cylinder backplates Two zippered utility pockets Small Lumbar Pad   Six stainless steel D-rings on vest Integral lifting harness SOLAS reflective symbols on buckles Reflective 3M ScotchLite® trim on bladder Split Saddle Harness Two Hose Storage Pockets on Bladder Vest Measure waist size Shoulder Measure shoulder to waist XS* custom XS custom SM 25"-35" SM 14"-18" MD 33"-41" MD 18"-22" LG 37"-45" LG 22"-26" XL 42"-50" XL 26"29" *SAR and 911 XS size has a 20lb weight capacity Ripcord System, does not have cargo pockets over the weight pockets, and can use single tanks only.  

  • Ships FREE Worldwide!

    Ranger LTD
    $978.95

    Zeagle

    Ranger LTD

    5 Review(s)

    The Ranger adds even more advantages to a great BC system. The Ranger was the first BC to combine high quality heavy duty construction, weight integration, and rear flotation. It's introduction created a new category of buoyancy systems, and it is without doubt the most imitated BC in history! But it's the Ranger's incredible versatility that keeps knowledgeable divers recommending it year after year. Zeagle's modular construction allows the Ranger to transition between tropical travel diving, rugged cold water diving in wet or dry suits, single or twin cylinders, and even (with optional bladder assemblies having up to 2 X 85-LB lift and easily mounted backplates) technical diving! No other BC has such a loyal following and such a solid reputation for functionality, comfort, and durability. The Ranger Limited has all the features of the legendary Ranger BC, PLUS many innovative additions that make it even more functional and versatile! If you are a diver who wants a rugged recreational buoyancy system, but also want one that can adapt and change to meet different diving needs, the Ranger is a system you won't outgrow.   Vest Measure waist size Shoulder Measure shoulder to waist XS custom XS custom SM 25"-35" SM 14"-18" MD 33"-41" MD 18"-22" LG 37"-45" LG 22"-26" XL 42"-50" XL 26"29" Click here to view an instructional video on re-threading the ripcord

  • Ships FREE Worldwide!

    Ranger
    $789.95

    Zeagle

    Ranger

    10 Review(s)

    The Ranger has been at the "top of the charts" for nearly ten years– for some very good reasons: The Ranger was the first BC to combine high quality heavy duty construction, weight integration, and rear flotation. It's introduction created a new category of buoyancy systems, and it is without doubt the most imitated BC in history! But it's the Ranger's incredible versatility that keeps knowledgeable divers recommending it year after year. Zeagle's modular construction allows the Ranger to transition between tropical travel diving, rugged cold water diving in wet or dry suits, single or twin cylinders, and even (with optional bladder assemblies having up to 2 X 85-LB lift and easily mounted backplates) technical diving! Constructed of heavily reinforced 1050 denier ballistic nylon, the Ranger is compatible with a variety of options and accessories, including bladders, pockets, hard backplates, and custom gear attachment components. If you are a diver who wants a rugged recreational buoyancy system, but also want one that can adapt and change to meet different diving needs, the Ranger is a system you won't outgrow. Vest Measure waist size Shoulder Measure shoulder to waist XS custom XS custom SM 25"-35" SM 14"-18" MD 33"-41" MD 18"-22" LG 37"-45" LG 22"-26" XL 42"-50" XL 26"29" Click here to view an instructional video on re-threading the ripcord

  • Pullover Rubber Gloves for Dry Glove System
    $12.99

    DRIS Dive Gear

    Pullover Rubber Gloves for Dry Glove System

    53 Review(s)

    14" black rubber gloves that work with all dryglove systems.  This works great with our Rubber Pullover glove system Gloves come in 11, 10.5, 10, and 9.  You can select your sizing below.  

  • Pillow Lift Bags Various Sizes
    $0.00

    Carter Lift Bag

    Pillow Lift Bags Various Sizes

    2 Review(s)

    Enclosed Pillow Bags are totally enclosed, with over-pressure valves to vent expanding air as they ascend. The advantage of Pillow Bags over the Open Bottom Bags is that they can attain their maximum lift in much less water. For this reason, they are excellent for raising sunken boats, and for towing jobs. Like the Boulder Bags and the Ocean Salvage Tubes, all Pillow Bags come with brass quick-disconnect fittings attached to a short filler hose (connects to 1/4" pipe thread). Please see the table below for sizes and pricing.

  • This product has Video Review.

    Rubber Pullover Dry Glove Rings
    $74.99

    Si Tech

    Rubber Pullover Dry Glove Rings

    26 Review(s)

    These rubber rings quickly install on any suit.  Use almost any glove and pull it over the raised part.  Glove stays put.  With cheaper gloves that do not stay(due to design), you can use an o-ring to hold the glove.  When you want the gloves off, just stretch them back off.  This is one of the fastest and easiest ways to get drygloves!  Also known as the Viking Classic Cuff Rings You can also glue these into your suit, and use the inner ring as a way to replace your Wrist Seal in the field.  See below.  The rubber pullover gloves would still pullover and be in the system.  You would then still be able to change out your wrist at any time.

  • GRIPLOCK™ Tank Band Assembly
    $45.00

    Aqua Lung

    GRIPLOCK™ Tank Band Assembly

    2 Review(s)

    The GripLock™ tank band assembly is the easy and safe solution for securing a cylinder to a BC. • Modern design • Easy to rig and adjust • Durable metal buckle • Innovative “Finger-Saver” feature (pat. pending) eliminates pinched fingers • Macro-adjustment is set just once for each cylinder diameter • Three presets cover the various diameter cylinders in the field today • Micro-adjustment for fine tuning the fit after the band is on the cylinder • Rubber traction pad on the backside of the GripLock™ provides added security • Bands may be retrofitted to all BCs • 2 sizes available – select according to cylinder and BC typ GripLock Tank Band, Long, non-Wrapture™ harness version, for: PRO QD M, Black Diamond, and WTX Harness GripLock Tank Band, Standard Length, Wrapture™ harness version, for: WTX Back Plate w/ Deluxe One-Piece Webbed Harness NOTE:  Griplock Tank Bands are sold as single items.

  • Ships FREE Worldwide!

    Hazmat PS Drysuit (Public Safety Hazmat Diver)
    $2,295.00

    Aqua Lung Military

    Hazmat PS Drysuit (Public Safety Hazmat Diver)

    1 Review(s)

    The Hazmat Public Safety Drysuit is designed with the professional Public Safety diver in mind. Countless Fire Dept.’s, Sheriff’s Dept.’s and rescue teams have been using the Whites Hazmat for years. This suit has been designed with this diver in mind; the most popular features & options have become standard to meet the Public Safety diver’s needs. Using the latest in chemical and abrasion resistant materials as well as advanced construction techniques the Whites HazMat dry suit offers the user 2 layers of both water and chemical protection. All seams are reinforced, stitched, then heat sealed at over 600°c both inside and out making for an extremely durable and “dry” suit. This construction results in a smooth interior and exterior surface which allows for very easy decontamination of most chemicals.   Check out this CNN video on this suit being used in the Gulf Oil Cleanup efforts   Features Chemical resistant polyurethane inside and out allows dual protection and easy decontamination inside and out Available in Red with Black re-enforcements or all Black Anatomically-correct CAD designed pattern with pre-bent arms, legs and torso for a perfect fit. Available in 14 Standard Sizes and computer custom cut specific to the users exact measurements. Stronger and lighter, yet durable and pliable. Chemical resistant PolyTex pro wrist seals Extremely easy to repair Standard features & options include: Choose between the Heavy duty poly boots, comfort boots, or a dry soft sock with Evo III boots Permanently attached dry glove rings with replaceable seals SiTech Contaminated water dual exhaust valve & SiTech standard inlet inflation valve Polytex neckseal and Attached Polytex hood Includes hood liner, internal suspenders, inflator hose, repair kit, and a drysuit bag Please call about Sizing for your dive team.    

  • Ships FREE in the USA!

    Brotula BCD
    $495.00

    Aqua Lung Military

    Brotula BCD

    1 Review(s)

      The Aqua Lung Brotula BCD is an EZ to clean Jacket style BCD made from the same Armoguard material as the Apeks Wing donuts and is loaded with features.     Single bag , Armoguard material provides more abrasion protection than Cordura. Fast drying. Resists bacterial growth. Swivel buckle shoulder straps for comfort. Heavy duty breakaway carabiners. 6  bent stainless steel 2” D-rings Removable backpack pad. Easy to clean. WTX, K INFLTR, w/pull dump. Double pull zippered pockets on each side. Removable SureLock 1 weight system. Two non ditchable weight pockets located on the tank band. 3 pull dumps, 2 front and 1 rear.

  • Ships FREE Worldwide!

    Aqua Lung Rapid Diver PRO System

    Call For Price

    Aqua Lung Military

    Aqua Lung Rapid Diver PRO System

    The RAPID DIVER PRO System with 50 lbs of lift It is designed for professional use and is equipped to handle any emergency! Modular components and interchangeable accessories make the RAPID DIVER PRO the choice for a wide range of mission profiles. Also, the Rapid Diver PRO has the capability to float an unconcious diver in a face up position at the surface. Features include the award winning, Environmentally Sealed Aqualung Titan LX Supreme DIN Regulator w/ Auto Closure Device (prevents corrosive water from entering reg.),  gloss black Faber Steel 27 cu ft tank, integrated power/oral inflater with remote exhaust, 1000 denier ballistic nylon construction with MOLLE cross webbing, full size cylinder back mount system,  dual CO2 deploys, grab handle, three dump valves and more.This unit is being used in Maritime Security, Marine Patrol, Homeland Security, Public Safety , Fire Rescue and Law Enforcement applications.   Made In U.S.A.1000 Denier Black Ballistic Nylon BC w/ Molle Cross Webbing 50 lbs. lift capacity Rapid Diver PRO BC Float Unconcious Diver Face Up Capability Eight  2" Heavy Duty Carbon Reinforced Plastic Quick Disconnects(all replaceable) Gloss Black 27 cu. ft. Faber Steel Cylinder Aqualung Titan LX Supreme DIN Environmentally Sealed  Regulator w/44" Miflex hose Suunto Modular Submersible Pressure Gauge Over the shoulder hose with Easy Air Dump feature, Power Inflator, LP Hose 3 +1 Remote Air Dump Valves Advanced Load Bearing Back Pad w/ 2 Heavy Cam Straps-holds up to 80 cu. ft. rear mounted cylinder   2" Crotch Strap Dual C02 Deploy Mounts(for emergency surface deployment) Grab Handle Tank Mounted Easy Access Trauma Shears w/case 4 Grimlock Breakaway Webbing Clips Heavy Duty Carry Case Full Assembly-Yes  

  • Ships FREE Worldwide!

    ENVIRO COM 10 DRYSUIT
    $1,595.00

    Aqua Lung Military

    ENVIRO COM 10 DRYSUIT

    1 Review(s)

    The Enviro Com 10 Drysuit is designed with the professional drysuit diver that needs to adequately and thoroughly clean their drysuit at an economical price. This suit has been used for divers diving in Farm Silo’s, fish farms, sewers etc. The Enviro Com 10 has no exposed neoprene and all exterior surfaces have a smooth surface for easy cleaning.   Features Lightweight and compact Excellent drysuit with outstanding value Same smooth polyurethane exterior and seams as the hazmat series. Anatomically-correct CAD designed pattern with pre-bent arms, legs and torso for a perfect fit. Easiest suit on the market to repair Standard features & options include: Choose between the Heavy duty poly boots, comfort boots, or a dry soft sock with Evo III boots Permanently attached dry glove rings with replaceable seals Standard SiTech exhaust inflation valves Polytex neckseal and Attached Polytex hood Includes hood liner, internal suspenders, inflator hose, repair kit, and a drysuit bag Please call about Sizing for your dive team.  

  • Ships FREE Worldwide!

    Enviro Hybrid Drysuit
    $1,895.00

    Aqua Lung Military

    Enviro Hybrid Drysuit

    Enviro Hybrid Drysuit •HazMat Multi-Laminate bottom for superior puncture and abrasion resistance. • Enviro Bi-Laminate top for superior mobility and flexibility. • Chemical resistant polyurethane outer surface. • Exterior tape welded seams. • Tear and puncture resistant nylon inner. • Comfort boots with 7mm liner. • Permanently attached dry glove rings with replaceable. Polytex wrist seals. • Standard Exhaust valve & standard inlet inflation valve. • Attached Polytex hood and neckseal. • Includes hood liner, internal suspenders, inflator hose, patches, adhesive strips and a drysuit bag. SIZES XS, S, SK, M, MT, MK, L, LT, LK, XL, XLK, 2XL, 3XL, 4XL

  • Ships FREE in the USA!

    This product has Video Review.

    WTX PSD Armorguard Wing
    $435.00

    Apeks

    WTX PSD Armorguard Wing

    Designed for Public Safety divers, these 30 and 40 lb single cylinder wings boast all of the same features as the 30 and 40 lb single cylinder wings listed above but have the following differences: Armoguard exterior provides added benefits More abrasion resistant than Cordura® Fast-drying When it doesn't get rinsed, it won't smell or pick up bacterial growth The airway uses an 18" round spiral hose and has a rapid exhaust dump valve aka a cable pull dump   Style Single Cylinder Wing - Donut Sizes 2 Inflator WTX "K" Style w/ brass buttons Airway 18" corrugated hose w/ rapid exhaust dump on top Dump valves 1 Flat Valve - lower left Harness Can be used w/ WTX or webbed harness Weight System Optional SureLock II Drains Central mesh panel + 2 grommet Retractor option Yes Tank Stabilizer Bars Yes Exterior Material Armoguard slick skin Inner bladder 22 mil (.022) thick black urethane Zipper Heavy Duty YKK #10 Lift Capacity (lbs/N) WTX-D30 PSD Wing - 30 lbs Warranty Limited Lifetime

  • Ships FREE Worldwide!

    SAR FUSION DRYSUIT (DIVE OR SURFACE)
    $1,750.00

    Aqua Lung

    SAR Fusion Drysuit (Dive or Surface)

    Whites innovative DryCORE technology offers the ultimate in mobility, warmth, and streamlining. Quite simply, there is no comparable dive suit, wet or dry, that can match the performance of this revolutionary new design.   How it works: First Layer (DryCORE) is a loose fit shell dry suit incorporating latex seals, dry zipper, air intake and exhaust valves to create the waterproof barrier. Second layer "over suit" made with a durable stretch fabrics is attached to the DryCORE at the wrists, ankles and dry zipper to form the streamline form fit of the inner dry suit. Features Patented Fusion DryCore Technology Oversized drycore with external tech skin Exterior skin is made of 1mm super stretch neoprene and reinforced in high wear areas. Red or Black bottom with Red Top Unmatched flexibility & streamlined design Pockets Available S.A.R. Armband included Please call about Sizing for your dive team.  

  • Ships FREE Worldwide!

    Guardian
    $729.00

    OTS

    Guardian

    9 Review(s)

    With over 60 years of diving experience and having sold almost every Full Face Mask (FFM) on the market, it was easy to see there was a need for something better. A common problem with most FFM, is the seal. The lack of a good seal causes the diver to use air quicker and can interfere with the divers ability to hear if using underwater communications.   The Guardian as a Better Mask The Guardian was designed with a double seal, allowing for the comfort of both small and large faces. Equalizing system which helps fit virtually all noses. Variety of Colors are offered Low profile (visibility is superb) Hose comes off the right side (most preferred by divers) Easily adjustable head straps & robust buckles. Ambient Breathing Valve (ABV) Easily removable 2nd stage regulator (great for storage and maintenance) Mask bag And more. . .Tattoo? click here to see more!  

  • 5mm Thermocline Kevlar Glove
    $55.00

    Aqua Lung

    5mm Thermocline Kevlar Glove

    • Durable Kevlar on palms, fingers & back of fingertips for superior abrasion resistance • Standard neoprene with glued and blind-stitched seams • Ergonomically designed pre-curved fingers helps minimize hand fatigue • Adjustable cinch closure at wrist • Available in 3mm & 5mm • Packaged in a reusable mesh bag with hang tag ONLY AVAILABLE FOR PUBLIC SAFETY PURCHASES, NOT RECREATIONAL

  • Ships FREE Worldwide!

    Phantom 2 Drone
    $5,999.00

    DJI

    Phantom 2 Drone

    The new Phantom 2 have been released. What's new: New Remote ControlThe upgraded remote control comes with many new features. A gimbal control dial, trainer port, built-in rechargeable LiPo battery with a capacity of 2000mAh, battery level LED indicators and throttle locking feature that holds the throttle stick in place when descending are all included. Improved PowerNew motors, propellers, and ESCs combine to give you greater thrust and control than ever before. You can load more equipment on your Phantom, and achieve up to 200g/axis of extra thrust when using a 3S LiPo battery with this completely new system. New CompassA new, anti-static compass has been developed, with a protective shell to help shield it in any flight conditions.   The Phantom 2 Quadcopter is the second generation Phantom quad-rotor RC helicopter from DJI and features a larger battery and improved prop design, and flying time that lasts to up to 22 minutes, compared to around 14 minutes on the original DJI Phantom Quadcopter. This product will appeal to a variety of potential users, from RC aircraft hobbyists who want to record their flights to videographers and photographers looking to open up a whole new range of shooting possibilities. Included with this "ready-to-fly" version of the Phantom 2 Quadcopter is a 6-channel, 2.4GHz transmitter (TX) that comes pre-bound with the aircraft. It features an operational range extending up to 3,280' line-of-sight, depending on conditions. Because of the complexity associated with multi-rotor aircraft, the Naza-M V2 flight control system in the Phantom 2 relies on a GPS-based navigation as well as gimbal, compass, and other data to maintain flight stability and provide other assisted-flying features. While fully manual operation is possible, and can be unlocked using the Naza Assistant Software, most users, especially videographers hoping to get the smoothest possible shoots, will opt for GPS or GPS Attitude flight mode. In GPS Mode the Naza system keeps the Quadcopter stable and right-side-up when moving, and holds it in a fixed horizontal and vertical position whenever you release the sticks. New for this model, the Phantom 2 features a 5200 mAh battery system that has been simplified from the previous Phantom version. The battery now slots in without having to connect any DC leads, and features four LED indicators visible on the outside, tail-end of the aircraft helping you keep track of battery levels in flight. Charging is also simplified, with all of the charging circuitry now built into the battery itself, there is no more separate balance lead to worry about plugging in. Because of this design, the Phantom 2 battery cannot be charged with all-purpose balance chargers, only chargers made specifically for it.Note: An optional camera mount or Zenmuse gimbal is required to use a GoPro camera with the Phantom 2 Quadcopter.Warning: Never use the DJI Phantom 2 Quadcopter with your GoPro camera when both devices have their Wi-Fi systems turned on. The DJI Phantom's Wi-Fi and the GoPro camera's Wi-Fi run on the same frequency, so if you use them together when both Wi-Fi systems are engaged, the DJI Phantom's transmitter will lose the ability to communicate with the DJI Phantom Quadcopter. Whenever this happens, you will not be able to tell the Phantom where to fly. This may result in loss of property or damage to your equipment. Minimal Assembly RequiredThose used to other RC aircraft will note the Phantom 2 requires only basic assembly using a screw driver and supplied wrench. You will just need to attach the rotors, skids, and a few other small parts. Once assembled you will need to be sure to follow all of the calibration steps to ensure correct operation of the GPS autopilot system before flying.Includes Transmitter (TX)The Phantom 2 features a 6-channel, 2.4GHz WI-Fi transmitter, with dual joystick controls similar to the kind found on other multi-rotor RC aircraft transmitters. The sticks are configured in "Mode 2", the most popular mode in the U.S. The left stick controls throttle (up/down) and yaw (essentially rotation). And the right stick controls cyclic motion (side-to-side tilt pressing right/left and tilting the nose up or down pressing up/down). A switch on the top right lets you choose between Attitude and GPS flight modes and a similar switch on the left lets you select between IOC modes.Naza-M V2 Flight Control SystemThe brains of the aircraft, the Phantom 2 uses the same Naza-M V2 flight control system as several other DJI models, including the original Phantom. The software ships preconfigured with two available flight modes, GPS Mode and GPS Attitude Mode. Additional modes and other custom configurations can be enabled using the Naza Assistant software, a Windows-only application available for free download from the DJI website. In addition, the software can offload flight data for diagnostic and teaching purposes and well as perform firmware updates.Attitude and GPS Flight ModesThe Phantom 2 has two GPs-assisted flight modes for you to choose from. Of the two, GPS Mode is the most automatic. In GPS Mode the Quadcopter will stop as soon as you release the controls and stay hovering at a fixed horizontal and vertical position. This setting is the easiest to fly and is generally preferred for shooting video as the Quadcopter won't sway or drift because of light wind gusts.GPS Attitude Mode, or Attitude Mode, is a more manual flying mode in which the Phantom 2 does not try and maintain a fixed spatial position. When you release the controls it will continue to drift unless friction slows it down or you stop it. And in this mode it will be more likely to be blown around if there is any wind. This not a true manual mode, however, in that the GPS navigation system is still used to maintain flight stability and by the "return to home" feature in the event of signal loss.Return to Home FailsafeIf the Quadcopter loses the signal from the controller for any reason the "return to home" feature will initialize. The aircraft will ascend to 60 feet then make a straight-line course back to the "home position" you will have defined during the GPS calibration process. Once there, it will safely descend to the ground and power itself off.Intelligent Orientation Control (IOC)IOC is designed to help make flying more intuitive. Nominally, the yaw control will allow the Quadcopter to rotate continuously, which can quickly become confusing if you lose track of which way is "front". Suddenly your controls can get mixed up, where pressing right causes the craft to move left and pressing forward causes it move backward. Intelligent Orientation Control prevents this from happening, keeping the "tail" of the Quadcopter pointed roughly toward the pilot at all times. To enable this feature you will need to use the Naza Assistant Software.Slot-In Battery with LED Status IndicatorsA 5200 mAh battery slots into the "tail" of the Phantom 2 and enables up to 22 minutes of flying time. It features and on/off switch and four LED charge indicators that are visible while flying so you can keep track of remaining flight time. For recharging, balance and power regulation is handled internally within the battery itself. You simply plug it into a wall outlet with the supplied power cord and you are good to go.LED Status IndicatorLED status light on the rear struts of the Phantom 2 provide you with various feedback as well as warnings. Colors alternate between green, amber and red and can either be flashing or solid. These messages give you valuable information such as whether the GPS system is properly calibrated, warning you the battery is getting low or telling you the remote's signal is out of range.Self-Tightening RotorThe Phantom 2 features a rotor design that is new for this model. There is no longer a separate prop nut and the threading is designed to be self-tightening, so there is no danger of a loose prop coming off in flight.

  • Now On Sale

    Phantom 2 Vision Plus

    Was: $6,999.00

    On Sale: $1,159.99

    DJI

    Phantom 2 Vision Plus

    1 Review(s)

    The Phantom 2 Vision+ Quadcopter with Gimbal-Stabilized 14MP, 1080p Camera from DJI is based on the same air frame as the Phantom 2 and Phantom 2 Vision. Unlike its siblings, however, it features a 14 MP camera that is stabilized and controlled with an integrated 3-axis gimbal. Gimbal stabilization makes the Phantom 2 Vision+ ideal for shooting aerial footage and photos. The camera can take 14 MP, Adobe DNG RAW photos, and can record video in 1080p Full HD at 30 fps or 720p at 60 fps for creating slow motion effects.The Phantom 2 Vision+ ships ready-to-fly, meaning that a radio controller--often referred to as a transmitter is included with it and is pre-bound to the aircraft and that only minimal assembly using common household tools is required. It features a 5,200 mAh battery that can sustain the quadcopter in the air for up to 25 minutes. The transmitter features a line-of-sight range of up to 2625', depending on conditions. The camera is controlled via 2.4 GHz Wi-Fi using an app available for iOS and Android devices. Using the supplied mount, you can attach your smartphone directly to the controller, giving you a "heads up" display directly from the camera's point-of-view. From the app you will also be able to start and stop video recording, take a snapshot and even tilt the camera up or down.Because of the complexity associated with multi-rotor aircraft the Phantom 2 Vision+ relies on a GPS-based navigation system to maintain flight stability and provide other features. While fully manual operation is possible, most users, especially videographers hoping to get the smoothest possible shoots, will opt for GPS attitude mode. GPS attitude mode is an autopilot system that keeps the Quadcopter stable and right-side-up when moving, and holds it in a fixed horizontal and vertical position whenever you release the controls. This is ideal for shooting video because you can compensate for light or moderate wind that might otherwise cause the aircraft to drift. As with the other Phantom 2 models, 5200 mAh battery system is simplified over the original version 1 Phantom. The battery now slots in, and provides LED indicators on outside, tail-end of the aircraft so they can be seen in flight. Charging is also simplified, with all of the charging circuitry built into the battery itself. You simply need to plug it into the wall with the supplied universal AC adapter. An DC car charger, available separable, can also be used.The Phantom 2 Vision+ includes a Wi-Fi Range extender that will increase the wireless range of the smartphone used for FPV camera operation up to nearly 2300' line-of-sight. The range extender mounts on the transmitter (radio controller) along with the smartphone.Finally, there is a 4GB MicroSD card included to help get you started filming and taking photos with the 14MP camera. Gimbal Stabilized 14 MP HD CameraThe Phantom 2 Vision+ features a 14 MP camera specially with integrated 3-axis gimbal designed specifically for use with the Quadcopter. In addition to photos, the camera can record 1920 x 1080 resolution video at 30 fps and 720 video at 60 fps. The camera is controlled wirelessly via WiFi using an app available for smartphones with Android or iOS. Internal recording is to a MicroSD memory cards. Additionally, once captured footage can be uploaded from your smartphone to social media websites such as FacebookAttitude and GPS Attitude Flight ModesThe Phantom 2 Vision+ flight control system has two computer-assisted flight modes for you to choose from. Of the two, GPS attitude mode is the most automatic. In GPS attitude mode the Quadcopter will stop as soon as you release the controls and stay hovering at a fixed horizontal and vertical position. This setting is the easiest to fly and is generally preferred for shooting video as the Quadcopter won't sway or drift because of light wind gustsThe second, attitude mode, is a more manual flying mode in which the Phantom Vision does not try and maintain a fixed spatial position. When you release the controls it will continue to drift unless friction slows it down or you stop it. And in this mode it will be more likely to be blown around if there is any wind. This not a true manual mode, however, in that the GPS navigation system is still used to maintain flight stability and by the "return to home" feature in the event of signal loss.Return to Home FailsafeIf the Quadcopter loses the signal from the controller for any reason the "return to home" feature will initialize. The aircraft will ascend to 60 feet then make a straight-line course back to the "home position" you will have defined during the GPS calibration process. Once there, it will safely descend to the ground and power itself offIntelligent Orientation Control (IOC)IOC is designed to help make flying more intuitive. Nominally, the yaw control will allow the Quadcopter to rotate continuously, which can quickly become confusing if you lose track of which way is "front". Suddenly your controls can get mixed up, where pressing right causes the craft to move left and pressing forward causes it move backward. Intelligent Orientation Control prevents this from happening, keeping the "tail" of the Quadcopter pointed roughly toward the pilot at all timesDJI Vision iOS and Android AppThe DJI Vision App for iOS and Android smartphones provides many functions apart from just FPV monitoring, such as telemetry of vital flight stats including remaining battery and number of GPS satellites and a radar scope to help avoid collisions. It also features full camera control, letting you set parameters such as camera tilt, ISO, Shutter Speed, White balance as well as set video start/stop and take photos. Once recorded, photos and video footage can be downloaded directly to the phone allowing them to be shared on Facebook, Instagram or other social media networks, even while the Quadcopter is still in the airAssistant SoftwareWindows- and OSX-based software allows you to enable Intelligent Orientation Control (IOC), update firmware, and adjust other aircraft and transmitter parameters. In addition, the software allows you to unlock the manual flying mode. Manual Mode will override all autopilot redundancy and failsafes, therefore should only be engaged by experienced pilotsSlot-In Battery with LED Status IndicatorsA 5200 mAh battery slots into the "tail" of the Phantom 2 and enables up to 25 minutes of flying time. It features and on/off switch and four LED charge indicators that are visible while flying so you can keep track of remaining flight time. For recharging, balance and power regulation is handled internally within the battery itself. You simply plug it into a wall outlet with the supplied power cord and you are good to goIncluded 5.8 GHz TransmitterThe Phantom 2 Vision+ features an included 5.8 GHz RF remote transmitter, with dual toggle joystick controls similar to the kind found on other multi-rotor RC aircraft. The left stick controls throttle (up/down) and yaw (essentially rotation). And the right stick controls roll (side-to-side tilt) and pitch (tilting the nose up or down). A switch on the top right lets you choose between Attitude and GPS flight modes and a similar switch on the left lets you select between IOC modes. The control unit also features a detachable mount for holding your smartphoneLED Status IndicatorLED status light on the rear struts of the Phantom 2 Vision provide you with various feedback as well as warnings. Colors alternate between green, amber and red and can either be flashing or solid. These messages give you valuable information such as whether the GPS system is properly calibrated, warning you the battery is getting low or telling you the remote's signal is out of rangeSelf-Tightening RotorThe Phantom 2 features a rotor design that is new for this model. There is no longer a separate prop nut and the threading is designed to be self-tightening, so there is no danger of a loose prop coming off in flight

  • Ships FREE in the USA!

    DST First Stage

    Call For Price

    Apeks Military

    DST First Stage

    Apeks DST First Stage: DST first stage Balanced diaphragm designed first stage. Dry sealed system with swivel turret. 2500l/min. High quality hose. 4 LP 3/8" and 2 HP connections.   ONLY AVAILABLE FOR PUBLIC SAFETY PURCHASES, NOT RECREATIONAL

  • Shredder SAR
    $60.00

    Aqua Lung Military

    Shredder SAR

    • Special fin for water rescue, SAR swimming, and Helo OPS. • Compact and convenient for short distance travel • Ultra-light materials for optimum power and thrust • Provides exceptional maneuverability • One size - designed to fit over large boots • Adjustable buckles with padded heel and leash • Overall length: 16.5in / 42cm, Blade width: 10in / 25cm ONLY AVAILABLE FOR PUBLIC SAFETY PURCHASES, NOT RECREATIONAL

  • GRIPLOCK™ Tank Band Assembly

    Call For Price

    Aqua Lung Military

    GRIPLOCK™ Tank Band Assembly

    The GripLock™ tank band assembly is the easy and safe solution for securing a cylinder to a BC. • Modern design • Easy to rig and adjust • Durable metal buckle • Innovative “Finger-Saver” feature (pat. pending) eliminates pinched fingers • Macro-adjustment is set just once for each cylinder diameter • Three presets cover the various diameter cylinders in the field today • Micro-adjustment for fine tuning the fit after the band is on the cylinder • Rubber traction pad on the backside of the GripLock™ provides added security • Bands may be retrofitted to all BCs • 2 sizes available – select according to cylinder and BC typ GripLock Tank Band, Long, non-Wrapture™ harness version, for: PRO QD M, Black Diamond, and WTX Harness GripLock Tank Band, Standard Length, Wrapture™ harness version, for: WTX Back Plate w/ Deluxe One-Piece Webbed Harness NOTE:  Griplock Tank Bands are sold as single items.

  • 490 PVC Insulated Dryglove
    $17.50

    DRIS Dive Gear

    490 PVC Insulated Dryglove

    1 Review(s)

    Atlas 490 Triple Dipped PVC Dryglovesr Gloves are strong yet extremely soft and flexible even at cold temperatures. They feature a soft seamless insulated built-in lining and maintain their suppleness even down to -20ºC (-4ºF) on surface. The rough textured coating ensures grip and increases the gloves abrasion resistance and durability. The gloves are also oil resistant and chemical resistant. Features Cold Water Dryglove Seamless Cotton Acrylic Insulated Lining Triple Dipped PVC Coating Durable 12 inch Glove

  • Ships FREE Worldwide!

    Hazmat Com Drysuit (Commercial Hazmat Diver)
    $2,495.00

    Aqua Lung

    Hazmat Com Drysuit (Commercial Hazmat Diver)

    The Hazmat Commercial Drysuit is designed with the professional commercial diver in mind. This suit is a contaminated water drysuit equipped with a yoke for use with a diving helmet. Using the latest in chemical and abrasion resistant materials as well as advanced construction techniques the Whites HazMat dry suit offers the user 2 layers of both water and chemical protection. All seams are reinforced, stitched, then heat sealed at over 600°c both inside and out making for an extremely durable and “dry” suit. This construction results in a smooth interior and exterior surface which allows for very easy decontamination of most chemicals.   Features Chemical resistant polyurethane inside and out allows dual protection and easy decontamination inside and out Available in Red with Black re-enforcements or all Black Anatomically-correct CAD designed pattern with pre-bent arms, legs and torso for a perfect fit. Available in 14 Standard Sizes and computer custom cut specific to the users exact measurements. Stronger and lighter, yet durable and pliable. Chemical resistant PolyTex pro wrist seals Extremely easy to repair Standard features & options include: Choose between the Heavy duty poly boots, comfort boots, or a dry soft sock with Evo III boots Permanently attached dry glove rings with replaceable seals SiTech Contaminated water dual exhaust valve & SiTech standard inlet inflation valve Polytex neckseal and your choice of the following yokes: • Desco Yoke • SL27 • SL17 (Additional fees apply on the SL17) Includes internal suspenders, inflator hose, repair kit, and a drysuit bag Please call about Sizing for your dive team.  

  • Ships FREE Worldwide!

    Fusion SARS Skin

    Call For Price

    Aqua Lung

    Fusion SARS Skin

    Whites Fusion SARS Skin.  Skin ONLY Please call about Sizing for your dive team.  

  • Ships FREE Worldwide!

    Guardian with Buddy Phone
    $1,299.00

    OTS

    Guardian with Buddy Phone

    With over 60 years of diving experience and having sold almost every Full Face Mask (FFM) on the market, it was easy to see there was a need for something better. A common problem with most FFM, is the seal. The lack of a good seal causes the diver to use air quicker and can interfere with the divers ability to hear if using underwater communications. The Guardian as a Better Mask The Guardian was designed with a double seal, allowing for the comfort of both small and large faces. Equalizing system which helps fit virtually all noses. Variety of Colors are offered Low profile (visibility is superb) Hose comes off the right side (most preferred by divers) Easily adjustable head straps & robust buckles. Ambient Breathing Valve (ABV) Easily removable 2nd stage regulator (great for storage and maintenance) Mask bag And more. . .Tattoo?click here to see more! Buddy Phone Easy to install on any OTS Guardian Full Face Mask, this acoustic underwater telephone was originally designed for professional Search & Rescue Teams. Push to Talk System Squelch unit to descrease bubble and marine biological noise Uses ultrasonic upper single sideband for transmission Provides moderate range and clear diver-to-diver voice communication. RANGE: 150 to 1500 feet DEPTH: 130 Feet BATTERY TYPE: 9 volt(Not included) BATTERY LIFE: 8 to 10 hours

  • Ships FREE in the USA!

    This product has Video Review.

    Gas Switch Block
    $364.99

    Omni Swivel

    Gas Switch Block

    Solid brass construction for maximum durability. Oxygen Compatible Materials and O- Rings. Inlet adapters can be removed to expose 3/8"-24 female ports.   Allowing for flexibility of hose attachments, quick disconnects attach directly to the inlet port alleviating the need for more adapters. The OmniSwivel Gas Switch Block allows a diver to change between two separate air tanks without having to remove their full face mask.   The knob turns a full 180 degrees ensuring that there is no accidental switching during the dive. The knob pointing to the first position signifies that the air source closest to the outlet is in use. In case of a second stage failure, a diver can turn the flow off to mask and switch to an alternative regulator. This shut-off position also prevents a cross blending of gases during a switch over.   Solid brass construction for maximum durability. Oxygen Compatible Materials and O-Rings. Inlet adapters can be removed to expose 3/8"-24 female ports.  Allowing for flexibility of hose attachments. Quick Disconnects attach directly to the inlet port alleviating the need for more adapters.  

  • Ships FREE Worldwide!

    Surface Supply Air System
    $4,999.00

    DRIS Dive Gear

    Surface Supply Air System

    WOW, the days of overpaying for a surface supply system for your dive team are OVER! We have assembled a proven system that will ensure your dive team always has enough air! This system comes with the surface system plus the inwater system. This is a turnkey Surface Air Supply system. Most teams already have Full Face masks and communications, so we did NOT include them in the package. Your existing equipment will work with this system! Comes stock with 100ft of air hose, and can be upgraded to 200ft. This system can also be adapted with your current dive teams gear at a much lower price. We can see what you have, what additional items you would need, and create a custom system for you! Most of the time, at a greatly reduced price. Feel free to email us at info@diverightinscuba.com for details about your custom surface supply system.

  • Ships FREE in the USA!

    Pro QD M Hi Viz
    $460.00

    Aqua Lung Military

    Pro QD M

    Jacket style buoyancy compensator designed for open circuit use. Time proven, and used by many military and professional units worldwide. • Single bag construction, made of extra durable 1000 Denier Cordura • Now all black for clandestine operations • Comes in 5 different sizes • Buoyancy from 13L (30lbs) to 24L (54lbs) • 6 stainless steel 2” D-rings • 2 large zipper pockets with pull cord • SureLock I mechanical weight release system (safe, dependable and reliable) • Knife grommets and instrument retractor attachment point on left pocket • 2 overpressure relief/dump valves • CE approved (EN1809) ONLY AVAILABLE FOR PUBLIC SAFETY PURCHASES, NOT RECREATIONAL

  • Squeeze lock Blunt Tip
    $49.95

    Aqua Lung

    Squeeze lock Blunt Tip

    • 3” blade, overall length 6.5” • 304 series stainless steel or high grade Beta Alloy Titanium • Patented locking mechanism securely locks knife in sheath, but releases easily with a squeeze of the handle (Patent #5,926,959) • Variable mounting options: • Stainless Steel “barnacle nuts” & bolts are included for mounting through fabric or for installation on Buoyancy Compensators with knife grommets • Hose mounting straps are included for mounting to the BC inflator hose • Locking belt clip is integrated into sheath for attaching knife to webbing • Sheath has molded strap slots for use with optional rubber leg straps  

  • Ships FREE in the USA!

    FSR First Stage

    Call For Price

    Apeks Military

    FSR First Stage

    The Apeks XTX200 First Stage (aka FSR first stage) is the top performer in the Apeks range, and thanks to its innovative internal gas flow design it offers excellent air delivery and ease of breathing. It is a fully balanced diaphragm design, and thus offers continued and stable performance almost completely regardless of remaining cylinder pressures. Compatible with all mainline XTX second stages, the XTX200 First Stage is a definite winner amongst regs ! ONLY AVAILABLE FOR PUBLIC SAFETY PURCHASES, NOT RECREATIONAL

  • Ships FREE Worldwide!

    SAR MOSS DRYSUIT (DIVE OR SURFACE)
    $1,600.00

    Aqua Lung

    Sar Moss Drysuit (Dive or Surface)

    Maximize your mobility, dive the SAR MOS Swimmer   Featuring our Captive Suspension Flex panels, the SAR Moss Surface is all about maximum mobility and comfort! Perfect for SAR teams that require surface or diving drysuits that fit a wide range of divers with optimal mobility. The SAR MOSS is available as a diving drysuit or a Surface swimmer suit. Features Featuring Captive Suspension flex panels around the back of the waist. This double-layered stretch gusset offers insane flexibility and a form fit for more comfort while in the water. Comes with two Pocket Matrix plates pre-installed, one on each thigh, and one Compak pocket. Moulded air control kneepads with adjustable ankle straps to minimize air transfer to the boots. Self-Entry Front Chest dry zipper design allows high mobility and easy self-entry. Bell-shaped, heavy-duty and UV-resistant polytex wrists and neck seals can be trimmed to fit your size. Reflective SAR arm-bands make you more visible, enhancing your security (please specify “S.A.R.” or “RESCUE”) Whites heavy-duty moulded valve pads create an excellent seal and provide suit reinforcement. Si Tech low-profile automatic/adjustable exhaust valve with ratchet face plate (diving version) Si Tech swivel inflate valve allows you to connect the LP hose from any angle. (diving version) Si Tech LP hose with easy disconnect. (diving version) Moulded Back Pad suspenders ensure a snug fit while offering additional warmth to the kidneys. Reflective piping on the upper body for high visibility. Anatomically correct CAD-designed pattern with pre-bent arms, legs and torso gives a perfect fit. The suit comes with Multi-Laminate Shell Socks and Internal 3mm Neoprene SoftBoots, that match perfectly with Evo III boots. Attached 7mm moulded Rubber Boots with tough vulcanized sole covering and fin keeper are available on order (extra charges apply). Suit comes with Traveler Backpack, LP Hose, Zip Wax & Instruction Manual as applicable. Please call about Sizing for your dive team.  

  • Ships FREE in the USA!

    DS4 First Stage

    Call For Price

    Apeks Military

    DS4 First Stage

    Environmentally dry sealed version of the US4 1st stage with 4 medium pressure ports and one high pressure port. Adjustable intermediate pressure. Finished in highly polished chrome. 1st stage ports: 4 x 3/8 UNF and 1 x 7/16 UNF. A work horse with years of tested and proven experience now preferred by the most demanding dive teams. ONLY AVAILABLE FOR PUBLIC SAFETY PURCHASES, NOT RECREATIONAL

 
 

Set Ascending Direction

Items 1 to 32 of 60 total

per page
Page:
  1. 1
  2. 2