815 267 8400

Sidemount

Scuba Dive Harnesses - Find harnesses and dive wings as well as lift bladders and more

Fill your sidemount needs here with full systems, harnessess, weight plates, bungees and more!

Set Ascending Direction

Items 1 to 32 of 39 total

per page
Page:
  1. 1
  2. 2
  • Now On Sale

    This product has Video Review.

    SMS100 Sidemount System

    Was: $724.95

    On Sale: $494.95

    Hollis

    SMS100 Sidemount System

    1 Review(s)

    Available in sizes shown. Single bladder option only. Dual bladder version not available. Our SMS 100 Sidemount system was designed not just with the sidemount cave divers in mind, but any diver. Whether you are a beginner, advanced or technical diver, this kit was designed for you. Suitable for sidemounting twin or single cylinders, but also for use with rebreathers or rear mounted singles. This "go anywhere" system can be used in any environment from open water to the overhead environment. Ready to dive out of the box. 360 Degree wing - 52 lbs LiftBulletproof ConstructionSingle or Dual wing options availableCentrally and uppermost located elbow to avoid overhead interferenceUpper/Lower cam band slots for rear mounted single tankFull visibility over your systemReduces additional gear: Doubles bands / Hardware / Manifold - Benefit when travelingAids in transporting gear to and from the beach or boat - one tank at a timeStreamlines profile which in turn reduces drag increasing your bottom time 1000 denier CorduraTM w/ PU lamination outer shell & 15mil urethane internal bladderStreamlined design for reduced drag and passing through confined spacesLower left pull relief valve on SMS100 wing + Lower right on SMS100D wingIncludes elastic bungee system (removable)

  • 2" Triglide - No teeth
    $0.75

    DRIS Dive Gear

    2" Triglide - No teeth

    5 Review(s)

    Heavy Duty 2" Stainless Steel Tri Glides keeps the weights on your weight belt secure and in place.

  • SMS100 Weight Plate
    $69.95

    Hollis

    SMS100 Weight Plate

    4 Review(s)

    Weight system designed for the SMS100 sidemount harness makes a perfect accessory for those with additional weight requirements. The weight plate mounts to the rear of the SMS100 single or dual via SS bookscrews included with each harness. Supports up to 18lbs of weight, 3lbs per pocket. Details: 3lbs per pocket / 6 pockets total Adjustable height via alternate grommet locations Nylon Cordura for durability and abrasion resistance For use with SMS100 single and dual only    

  • This product has Video Review.

    V - Weight Pouch
    $15.00

    Highland

    V - Weight Pouch

    18 Review(s)

    Add trim weight in the center groove of your backplate Attach with twin cylinder band bolts 11" center to center Sealed opening with double velcro closure Just pour in your leadshot of up to 5lbs

  • Velcro Weight Pocket
    $11.00

    XS Scuba

    Single Weight Pocket

    31 Review(s)

    • Designed to add up to 5 pounds of bagged shot or hard weight • Attaches by sliding over the end of 2” webbing • Easy addition to XS Scuba weight belt or other harness systems • Perfect for adjusting your trim

  • Ships FREE Worldwide!

    This product has Video Review.

    SMS75
    $699.95

    Hollis

    SMS75

    2 Review(s)

    The SMS75 is an evolution from years of sidemount development, which started with the SMS100. A product that has been copied, modified and a benchmark for technical sidemount for years. Even more popular has been the lightweight SMS50 line. These two have taken sidemount mainstream and the building blocks this new harness. While it will cater more to hardcore cave divers, SMS75 was created to handle all environments. Proper trim is key and the wing is designed to promote horizontal diving with increased lift towards the hips where it’s needed most, and without modification. The SMS75 will also support rear mounted tanks and reversible inflator positions.   Trapezoid shape to promote horizontal trim Adjustable and removable wing bungee Designed for cave or open water sidemount Cam slots for single tank and grommets at 11” for banded doubles Reversible Inflator & Dump assembly Rigging kit included: Tank bungees, SS Cam bands, SS Bolt snaps & nylon line Includes sternum strap & crotch strap Inner located elbow to avoid overhead interference   Specs: Rugged 1000D Cordura 40 lb. lift Three sizes: SM/MD, LG/XL and XXL System weight 7 pounds

  • Ships FREE Worldwide!

    SMS BCD and Regulator Sidemount Package

    As low as: $1,999.95

    Hollis

    SMS BCD and Regulator Sidemount Package

    Customize the package for your customer: Pick any of the SMSSystems: SMS75 or SMS100 or SMSKatana BCD   The SMS75 is an evolution from years of sidemount development, which started with the SMS100. A product that has been copied, modified and a benchmark for technical sidemount for years. Even more popular has been the lightweight SMS50 line. These two have taken sidemount mainstream and the building blocks this new harness. While it will cater more to hardcore cave divers, SMS75 was created to handle all environments. Proper trim is key and the wing is designed to promote horizontal diving with increased lift towards the hips where it’s needed most, and without modification. The SMS75 will also support rear mounted tanks and reversible inflator positions.  Trapezoid shape to promote horizontal trim Adjustable and removable wing bungee Designed for cave or open water sidemount Cam slots for single tank and grommets at 11” for banded doubles Reversible Inflator & Dump assembly Rigging kit included: Tank bungees, SS Cam bands, SS Bolt snaps & nylon line Includes sternum strap & crotch strap Inner located elbow to avoid overhead interference   Hollis continues to lead the sidemount revolution with the new SMS Katana - the latest innovation in our line of sidemount systems engineered to perform in the most extreme environments. Honed by extensive testing and refinement, the SMS Katana, designed by Nick Hollis in partnership with leading cave diving instructors, is a cutting edge cave penetration tool without equal. the SMS Katana design builds on the proven SMS100 and SMS75 sidemount systems but was further streamlined to reduce drag and allow for easier movement in confined spaces providing optimal performance in the warm water cenotes and caves of northern Florida and Mexico. Streamline and compact design Bulletproof Construction 8 strategically placed D-rings: 2 on each shoulder strap, 1 on each hip/shoulder strap connection point and 2 rear, one left and one right, for securing main tanks or other accessories. 35 lbs. of lift. The perfect wing size and weight for travel One size fits all harness 3 weight pockets: two 5 lb. (2.26 kg) and one 3 lb. (1.36 kg) “H” harness design for adjustability Reversible Inflator & Dump assembly Primary bungees integrated into the wing to pull tanks up and away from diver's torso Retainers located to avoid overhead interference Streamlined profile reduces drag and allows for easier movement in confined spaces   Included the package:   2 x DCX 1st Stage DIN 2 x 200LX 2nd Stage Hose, LP 36" Hose, LP 84" 2 x Gauge Metal No Boot 2 x Hose, HP 6" SMS 75, SMS100 Single or KatanaRegulator Necklace 

  • Weight Pocket with Outer Velcro
    $12.00

    XS Scuba

    Weight Pocket with Outer Velcro

    9 Review(s)

    • Same design as Single Weight Pocket above, except:    - Allows excess webbing from cam strap to attach to      Velcro loop on front of weight pocket    - Keeps cam strap webbing secure against cylinder • Designed to add up to 5 pounds of bagged shot or hard weight • Easy addition to XS Scuba weight belt or other harness systems • Perfect for adjusting your trim • Color: black

  • Ships FREE Worldwide!

    Nomad LS Sidemount System
    $549.00

    Dive Rite

    Nomad LS Sidemount System

    Dive Rite is proud to introduce the newest member to the Nomad family of sidemount rigs, the Nomad LS. The Nomad LS builds on its "L" series predecessors to be the most streamline and capable system in the family. Features include: 35 lbs (15.8 kg) of lift SuperFabric armored outer panel Deluxe-style webbing harness Inflator hose routed from the bottom of the wing 2 OPVs, one at the top of the wing and one on the bottom opposite the inflator Low profile buttplate  Optional 10 lb (4.5 kg) lift bailout bladder Optional spine weight plate, up to 12 lbs ( 5.4 kg) The main differences between the Nomad LS and the retired Nomad LTZ are:   Diamond shaped wing, to provide more lift to the hips and butt Zero lift baffle that prevents air from sitting at the top of the wing, but still allows air to travel to the pull dump Deluxe-style webbing harness is separate from the wing, and can be replaced if needed Includes the NEW Adjustable Bungee System: The Dive Rite Adjustable Bungee System (ABS) allows fast and easy customization to fit any sidemount diver. The bungee cord is weaved through a custom designed, laser cut Delrin plate providing an infinitely adjustable bungee.    The Adjustable Bungee System can also be quickly changed between Dive Rite's standard ring bungee system, loop bungees with a snap, or traditional loop bungees.

  • Ships FREE in the USA!

    Thermo Modular PRO Valve - Left Hand
    $79.95

    XS Scuba

    Thermo Modular PRO Valve - Left Hand

    2 Review(s)

    Standard yoke outlet with spin-out DIN insert converts to 230 bar DIN outlet Modular access  plug included 3/4"-14 NPSM standard inlet threads Threaded clip tube included Clean for pre-blended Nitrox up to 40% oxygen

  • Ships FREE Worldwide!

    This product has Video Review.

    Nomad XT Sidemount Rig
    $800.00

    Dive Rite

    Nomad XT Sidemount Rig

    3 Review(s)

      The Nomad XT is Dive Rite's expedition sidemount system. Built on a TransPac XT base, the Nomad XT is not only suited for sidemount but can handle backmounted doubles, singles, or CCR. The Nomad XT is built with the ultimate streamlining in mind. A properly balanced sidemount rig should not require additional weight on the shoulders. Divers who wear heavy tanks or those just getting started with sidemount will often opt this older solution to resolve trim issues. Seeing this makeshift solution in the field, we designed our expedition sidemount rig with a wing design to give it the best trim possible directly out of the box. Narrow at the neck and angled at the sides with more lift added to the bottom, the Nomad XT wing is designed to give lift where its most needed - at the hips. The inflator is at the top center of the wing, behind the neck.  Dual OPVs at the bottom of the wing allows for gas dumping from any angle. Also divers who wish to swap the position of their inflator to route from the bottom, can now do so and retain an OPV dump at the bottom of the wing for safe gas dumping when inverted. Made with a super-tough exterior and modular flexibility, the outer panels of the wing are engineered using SuperFabric® brand technology for optimum resistance to punctures and abrasions, while remaining very flexible. In addition to its rugged exterior, the Nomad XT has the added benefit of being a modular system: the harness, wing, buttplate and crotch strap are all separate elements. This allows the traveling explorer (or any diver wishing to modify their rig) the ability to trade out wings, remove the buttplate or make any fit adjustments necessary to meet the objective of the dive mission. A Gusset Control System (GCS) allows you to control lift when switching out various types of cylinders, such as going from steel to aluminum or twin tanks to single. Without the Gusset Control and without using the wing keepers on the waist belt, the Nomad XT delivers a full 50 lbs of lift. The Nomad XT includes Dive Rite's Adjustable Bungee System, which allows for easy length adjustment to fit any diver without needing to tie knots. The Adjustable Bungee System also allows a diver to use any bungee configuration they desire, including: ring bungee, loop bungee with snap, and loop bungee. A set of chokers are included for divers using Dive Rite's ring bungee and choker method. The butt plate, made of reinforced nylon to provide the proper amount of rigidity to hold tanks in position and eliminate sag along with two stainless steel rails, provides the lower attachment point for cylinders. The Nomad XT Sidemount Rig comes assembled and includes a TransPac XT harness, Nomad XT wing, buttplate and 2-inch crotch strap, adjustable bungees, and chokers. Diver needs to specify TransPac size (M-XXL) when ordering. Available in single or dual bladder.   Features:   TRANSPAC XT HARNESS available in sizes M, L, XL, XXL. WING is available as a single bladder or dual bladder Choice of 12-inch, 16-inch or 22-inch elbow corrugated hose along with either 15-inch, 22-inch or 27-inch low-pressure inflation hose. Common configuration is 16-inch corrugated hose with a 15-inch low-pressure inflation hose for an average 6-foot, 225lb man. Please adjust according to chest size, height and individual preference. BUNGEES: Adjustable Bungee System CHOKER (BC2720-CHOKER) comes standard with two, nylon tank neck chokers to attach the Nomad bungee clip to and secure the bottle easily under the arm. Nomad weight Med: 9.375lbs (4.25kg), Lg: 9.625lbs (4.36kg), XL: 10.06lbs (4.56kg)   Tips:   Multiple grommets on the plate allow the diver to move the rig in 2″ increments to adjust trim. Very handy when changing cylinder sizes. The chest strap should be fastened before the bungees are attached. The chest strap is used to ensure the shoulder straps come down across the shoulders and parallel to each other. This way they apply pressure to keep the bungees in place The 2″ crotch strap should be adjusted so it is snug and pulls the waist belt down slightly in the front. For cave diving we recommend butt mounting the canister light on the crotch strap below the tank mounting rings, you will need a longer light cord and the 70 degree angled canister light routes the light cord properly. For sidemount diving, run the light cord up under the waist belt so it doesn’t interfere with cylinder attachments.

  • Ships FREE in the USA!

    Thermo Modular PRO Valve - Right Hand
    $79.95

    XS Scuba

    Thermo Modular PRO Valve - Right Hand

    2 Review(s)

    Standard yoke outlet with spin-out DIN insert converts to 230 bar DIN outlet Modular access  plug included 3/4"-14 NPSM standard inlet threads Threaded clip tube included Clean for pre-blended Nitrox up to 40% oxygen Sold as left handed or Right handed, not as pair

  • Ships FREE Worldwide!

    This product has Video Review.

    Nomad Sidemount Regs w/SPG
    $849.00

    Dive Rite

    Nomad Sidemount Regs w/SPG

     The XT's ambidextrous orientation was made for sidemount. The XT left hand regulator provides the perfect hose routing for the left tank paired with our 60-inch Airflex hose and a 70 degree angle adapter. The hose no longer has to wrap around the neck where it can catch; instead the hose runs under the arm straight to the mouth using the angle adapter. The XT right hand regulator pairs with a 22-inch hose for the right hand bottle, again with a angle adapter to avoid pulling.   Our braided Airflex hoses makes hose management easy and come standard with the XT Nomad set up. The 2" SPGs come with a 6" HP hose and can be mounted up or down, depending on diver preference for viewing ease. Tech Specs   XT1 First Stage QTY:2 XT2 Second Stage, right-hand XT2 Second Stage, left-hand 60-inch braided Airflex LP hose 22-inch braided Airflex LP hose 70-degree second stage adapter QTY:2 Compact 2" SPG with 6" HP hoses QTY:2  Regulator necklace Small swivel bolt snap Hose clip retainer   Available configurations:   5' Left 22" Right w/ PSI SPG 5' Left 22" Right w/ BAR SPG 7' Right 22" Right w/ PSI SPG 7' Right 22" Right w/ BAR SPG

  • Ships FREE Worldwide!

    Nomad LS Sidemount Package
    $1,357.00

    Dive Rite

    Nomad LS Sidemount Package

    This ultimate sidemount package includes: Nomad LS BCD Nomad Regulator set Nomad LS weight plate Nomad LS BCD Dive Rite is proud to introduce the newest member to the Nomad family of sidemount rigs, the Nomad LS. The Nomad LS builds on its "L" series predecessors to be the most streamline and capable system in the family. Features include: 35 lbs (15.8 kg) of liftSuperFabric armored outer panelDeluxe-style webbing harnessInflator hose routed from the bottom of the wing2 OPVs, one at the top of the wing and one on the bottom opposite the inflatorLow profile buttplate Optional 10 lb (4.5 kg) lift bailout bladderOptional spine weight plate, up to 12 lbs ( 5.4 kg) The main differences between the Nomad LS and the retired Nomad LTZ are: Diamond shaped wing, to provide more lift to the hips and butt Zero lift baffle that prevents air from sitting at the top of the wing, but still allows air to travel to the pull dump Deluxe-style webbing harness is separate from the wing, and can be replaced if needed Includes the NEW Adjustable Bungee System: The Dive Rite Adjustable Bungee System (ABS) allows fast and easy customization to fit any sidemount diver. The bungee cord is weaved through a custom designed, laser cut Delrin plate providing an infinitely adjustable bungee. The Adjustable Bungee System can also be quickly changed between Dive Rite's standard ring bungee system, loop bungees with a snap, or traditional loop bungees. Weight Plate: Needing to add weight to your Nomad LS Sidemount Rig? Do so quickly and effectively with the Nomad LS Weight Plate. The Nomad LS Weight Plate has 3 pockets that can accommodate up to 4 pounds each (depending on the shape and type of weight). The weight plate attaches to the Nomad LS using the two metal 2" slides that come sewn onto the rig, allowing for easy installation or removal Made from ballistic nylon materialPockets close with a hook and loop fastener materialPlate length: 12 inches (30.5 cm)Webbing attachments: 6 inches (15.25 cm) each Nomad Sidemount Regulator Package: The XT's ambidextrous orientation was made for sidemount. The XT left hand regulator provides the perfect hose routing for the left tank paired with our 60-inch Airflex hose and a 70 degree angle adapter. The hose no longer has to wrap around the neck where it can catch; instead the hose runs under the arm straight to the mouth using the angle adapter. The XT right hand regulator pairs with a 22-inch hose for the right hand bottle, again with a angle adapter to avoid pulling. Our braided Airflex hoses makes hose management easy and come standard with the XT Nomad set up. The 2" SPGs come with a 6" HP hose and can be mounted up or down, depending on diver preference for viewing ease. Tech Specs XT1 First Stage QTY:2 XT2 Second Stage, right-hand XT2 Second Stage, left-hand 60-inch braided Airflex LP hose 22-inch braided Airflex LP hose 70-degree second stage adapter QTY:2 Compact 2" SPG with 6" HP hoses QTY:2 Regulator necklace Small swivel bolt snap Hose clip retainer Available configurations: 5' Left 22" Right w/ PSI SPG 5' Left 22" Right w/ BAR SPG 7' Right 22" Right w/ PSI SPG 7' Right 22" Right w/ BAR SPG

  • Ships FREE Worldwide!

    This product has Video Review.

    500SE Side Exhaust Regulator
    $599.95

    Hollis

    500SE Side Exhaust Regulator

    1 Review(s)

    Old School. New Tech. The new 500SE utilizes a servo controlled valve to provide precision airflow and unparalleled performance for both air and trimix divers in a side exhaust configuration. To achieve this, we have perfected the original "lever-servo valve" we designed 35 years ago. Overbalanced diaphragm first stage also provides ideal hose routing for both backmount and sidemount users and optimum performance regardless of depth.   500SE Second Stage Pneumatically balanced servo valve system Patented Orthodontic Mouthpiece for comfort and reduced jaw fatigue Standard with 30" maxflex hose Easily disassembled without the use of tools and underwater if necessary Left or right positioning - no upside down Boltsnap tie point DC7 First Stage   High performance over-balanced first stage provides progressively greater intermediate pressure as depth and gas density increases for superior gas delivery under the most extreme conditions.   Fixed hose routing ideal for both backmount and sidemount configuration Environmental sealing prevents internal corrosion, contaminants, and icing of the first stage Designed to withstand the rigorous CE standard for coldwater performance Nitrox compatible to 40% 2 High Pressure and 4 Low Pressure ports DIN/300 bar The 500SE's pneumatically balanced servo-valve is actually a two-stage valve. Just a small sip through the mouthpiece opens the servo mechanism or control valve lever. Air flow from the servo valve creates a vacuum which immediately opens the main valve diaphragm allowing air to flow through the regulator to the mouthpiece. Instead of one small port to provide air flow from the first stage, the 500SE features porting around the entire main valve. With less restriction from the first dive stage, this allows maximum performance.

  • Ships FREE Worldwide!

    Hog D3 Sidemount Package
    $799.00

    HOG Gear

    Hog D3 Sidemount Package

    Setup your sidemount rig with 2 of these beautiful Zenith Second Stages, 2 of the New D3 First Stages, 2 Hog 1.5" SPGs,  2 90 Degree Adapters, 2 HP 6" SPG Hoses, 1 - LP 84”  Regulator Hose, 1 - LP 32” Regulator Hose, 1 - 15” BC Quick Disconnect Hose, 2 Din Caps, Includes 2 DIN Caps to protect your First Stages:

  • Ships FREE in the USA!

    SMS Katana
    $499.95

    Hollis

    SMS Katana

    Hollis continues to lead the sidemount revolution with the new SMS Katana - the latest innovation in our line of sidemount systems engineered to perform in the most extreme environments. Honed by extensive testing and refinement, the SMS Katana, designed by Nick Hollis in partnership with leading cave diving instructors, is a cutting edge cave penetration tool without equal. the SMS Katana design builds on the proven SMS100 and SMS75 sidemount systems but was further streamlined to reduce drag and allow for easier movement in confined spaces providing optimal performance in the warm water cenotes and caves of northern Florida and Mexico. Streamline and compact design Bulletproof Construction 8 strategically placed D-rings: 2 on each shoulder strap, 1 on each hip/shoulder strap connection point and 2 rear, one left and one right, for securing main tanks or other accessories. 35 lbs. of lift. The perfect wing size and weight for travel One size fits all harness 3 weight pockets: two 5 lb. (2.26 kg) and one 3 lb. (1.36 kg) “H” harness design for adjustability Reversible Inflator & Dump assembly Primary bungees integrated into the wing to pull tanks up and away from diver's torso Retainers located to avoid overhead interference Streamlined profile reduces drag and allows for easier movement in confined spaces

  • Ships FREE Worldwide!

    Sidemount Regulator Kit
    $1,550.00

    Apeks

    Sidemount Regulator Kit

    2 Review(s)

    As sidemount diving continues to grow, Apeks answers the need to deliver a kit that contains all of the necessary hardware and accessories, along with two of their award-winning XTX50 regulators, that will be convenient for the sidemount diver and save him money along the way. Everything a diver needs for a sidemount breathing system is found in this kit. Kit contents: • 2 ea. XTX50 DIN regulators with 5 port swivel turrets o One XTX50 has a 83” / 210cm hose o One XTX50 has a 24” / 60cm hose • 2 ea. custom length MP inflation hoses (one for buoyancy system, one for drysuit) • 2 ea. brass pressure gauges with 6 inch hoses (units in PSI) • 1 ea. 90° elbow fitting • 1 ea. bungee necklace • 1 ea. stainless steel clip • 2 sets of short exhaust ports • Regulator bag to hold all • Setup illustration, CD manual and quick start guide   * Set with BAR gauges will include both, BAR and PSI models (2 of each). 

  • Ships FREE in the USA!

    Thermo Modular DIN Valve - Left Handed
    $79.95

    XS Scuba

    Thermo Modular DIN Valve - Left Handed

    Dedicated 300 bar DIN outlet Attachment of DIN first stages only Modular access plug included 3/4"-14 NPSM standardd inlet threads Threaded dip tube included Air service only

  • Ships FREE Worldwide!

    Halcyon Sidemount Regulator Package
    $1,126.00

    Halcyon

    Halcyon Sidemount Regulator Package

    Now available: Halcyon Sidemount Regulator Package. Configure your own perfect regulator set.  *Your choice of First Stage:  H-50D or H-75P     *Your choice of Second Stage:   Aura or Halo *Your choice of gauges: Stage or Master Our Halcyon Sideomount Regulator Package Includes:   Two Halycon First Stages with DIN caps and two Halcyon Second Stages Choice of one 60 in or 84 in  Regulator Hose Choice of 22" or 24" Regulator Hose Two 6 in  HP hoses for the SPGs Two Halcyon SPG's Necklace Stainless Bolt Snaps with clip retainer Optional angled adapters for the second stages (2)  

  • Nomad Loop Bungee - No Hardware (each)
    $15.00

    Dive Rite

    Nomad Loop Bungee - No Hardware (each)

    3 Review(s)

    Take the guesswork out of bungee sizing with Nomad bungee loops. These are 5/16 bungee material that form a loop on one. Traditionalists can use these to go over cylinder valves. These bungee straps are the platform for the ring bungee system that allows hardware to be replaced or changed out for larger clips for coldwater divers. At 9.5-inches long the bungee is short enough for a petite person and adding extra hardware can lengthen them for a larger diver. We designed these to be independent of hardware so divers can pick the hardware that suits their diving style. Made in the USA. Tech Specs Nylon cord bungees A 9.5-inch loop only so you can add your own hardware Priced EACH   Click here to view the bungees with the hardware.

  • Stainless Steel Tri-Glides
    $1.50

    Scuba Max

    Stainless Steel Tri-Glides

    15 Review(s)

    Stainless Steel Tri-glides

  • Ships FREE Worldwide!

    M1 Sidemount Regulator Package
    $1,540.00

    Atomic Aquatics

    M1 Sidemount Regulator Package

    1 Review(s)

    Our Atomic M1 Sidemount Regulator Package Includes:   Two Atomic M1 First Stages with DIN caps and two M1 Second Stages Choice of one 60 in or 84 in  Regulator Hose Two angled adapters for the second stages Two 6 in  HP hoses for the SPGs Two SPG's Necklace Stainness Bolt Snaps with clip retainer

  • Adjustable Bungee System
    $24.00

    Dive Rite

    Adjustable Bungee System

    The Dive Rite Adjustable Bungee System (ABS) allows fast and easy customization to fit any sidemount diver. The bungee cord is weaved through a custom designed, laser cut Delrin plate providing an infinitely adjustable bungee. The bungee will support even the heaviest of steel tanks without slipping thanks to the unique weaving pattern. There are no knots to tie and no tools are required--just loosen the weave at the plate, adjust to the correct length, and re-tighten. Make quick work of fine tuning your sidemount system and easily adjust for different sized tanks or varying thicknesses of exposure protection. They are also ideal for instructors and rental programs that need to quickly size the bungees for their customers. The Adjustable Bungee System can also be quickly changed between Dive Rite’s standard ring bungee system, loop bungees with a snap, or traditional loop bungees. Simply unweave the bungee, add or remove hardware as necessary, and re-weave. The bungees can be easily attached to any of Dive Rite’s sidemount harnesses using the daisy chain webbing attachment point. Alternatively they can be attached to any small D-ring or quick link attached to the side of a standard backplate or harness. The ABS uses high quality, tight weave ¼” bungee for long life and just the right amount of stretch. If the bungee does get damaged it is easily replaceable in the field. The system includes the bungee, weaving plate, and ring bungee hardware including a 2” stainless steel ring, medium quick link, and medium bolt snap. TECHNICAL DETAILS HW1026 Medium Stainless Bolt Snap HW1021SS 2″ Stainless Ring HW1014SS Medium Stainless Quick Link 30 inches (76.2 cm) of 1/4 inch (6.35 mm) Bungee Delrin bungee plate  

  • Ships FREE Worldwide!

    Recreational Regulator Package #1
    $1,165.50

    Halcyon

    Recreational Regulator Package #1

    Celebrating 20 years with Halcyon just got sweeter. We are excited to release the 20th Anniversary regulator packages which include everything that is needed to build a complete Halcyon regulator system in one convenient and easy-to-order package. Our Recreational Regulator Package #1 includes one H-75P first stage, one each of our Halo and Aura second stages, a master SPG, bungie necklace, two bolt snaps and a complimentary complete hose kit for the appropriate system AND a complimentary Traveler regulator bag.

  • Single Weight Pocket w/Velcro Front
    $13.00

    XS Scuba

    Single Weight Pocket w/Velcro Front

    21 Review(s)

    Here is the one that everyone has been asking for Velcro® release weight dump Designed to add up to 5 pounds of shot or hard weight Attaches by sliding over the end of any 2" webbing or 2" cummerbund Easy addition to XS Scuba ponypac or other harness systems Perfect for adjusting your trim

  • Ships FREE Worldwide!

    WSX 25 Sidemount Harness
    $795.00

    Apeks

    WSX 25 Sidemount Harness

    Apeks, the company that produces the premiere line of technical dive gear, offers you a top of the line sidemount harness system. The WSX-25 is a feature rich, complete sidemount harness system. The WSX comes with the bladder, harness with crotch strap, D-rings, bungee and accessory butt pack. The Apeks “SlideLock” sliding D-ring allows the diver to easily change the position of the cylinders as their buoyancy changes during the dive. The 2 piece plate system is adjustable to nearly any torso length, making this truly a one size fits all system.   Features:   Bladder: 25lbs lift Armoguard exterior Additional protective layer of Armoguard protects the bladder against abrasions in confined spaces Reversible inflator can be mounted on left or right side Grommets at lower corners allow for mounting bungee to keep the bladder streamlined to your body Harness: Solid 2” (5cm) webbing comes pre-assembled Removable crotch strap made of 2” (5cm) soft webbing 4 – two inch stainless steel D-rings (2 angled on shoulders, 1 angled and 1 flat on the crotch strap) 2 – “SlideLock” sliding stainless steel D-rings on waist strap allow for easy adjustment of cylinders throughout the dive 2 – Stainless steel drop D-rings along the lower back are for the included butt pack, marker buoys, reels or other accessories Heavy-duty waist buckle made of stainless steel 2 piece stainless steel plate allows the torso length to be adjusted to fit any diver   Zippered Butt Pack with stainless steel snap hooks included Weight pouch is mounted on the spine strap and holds over 18lbs (9kgs) of weight Comes complete with 2 sizes of bungee and 5 stainless steel snap hooks 2 grommet strips allow the diver to adjust the weight pouch and bladder based on their specific requirements   Bladder Material Armoguard Sizes One size fits all Plate System 2 piece stainless steel D-Rings Stainless steel / total of 6 Waist buckle Stainless steel Accessory butt pack Included Airway holddown Bungee with snap hook Crotch strap Yes, removable Bungee Yes, 2 sizes of bungee are included Weight pouch 3x 3kgs (18lbs) Grommet strip 2 included

  • This product has Video Review.

    Nomad LTZ & LS Weight Plate
    $59.00

    Dive Rite

    Nomad LTZ & LS Weight Plate

    Needing to add weight to your Nomad LTZ Sidemount Rig? Do so quickly and effectively with the Nomad LTZ Weight Plate. The Nomad LTZ Weight Plate has 3 pockets that can accommodate up to 4 pounds each (depending on the shape and type of weight). The weight plate attaches to the Nomad LTZ using the two metal 2" slides that come sewn onto the rig, allowing for easy installation or removal.   TECHNICAL DETAILS Made from ballistic nylon material Pockets close with a hook and loop fastener material Plate length: 12 inches (30.5 cm) Webbing attachments: 6 inches (15.25 cm) each

  • Ships FREE in the USA!

    Thermo Modular DIN Valve - Right Hand
    $79.95

    XS Scuba

    Thermo Modular DIN Valve - Right Hand

    2 Review(s)

    Dedicated 300 bar DIN outlet Attachment of DIN first stages only Modular access plug included 3/4"-14 NPSM standardd inlet threads Threaded dip tube included Air service only

  • Bent D-Ring
    $3.25

    H2Odyssey

    Bent D-Ring

    8 Review(s)

    Bent stainless steel D-ring for use with a harness for diving. 

  • Ships FREE Worldwide!

    WTX-60R Buoyancy Cell
    $650.00

    Apeks

    WTX-60R Buoyancy Cell

    The first of it’s kind. This clever, redundant buoyancy cell has both airways coming off the back top of the cell. This is the ideal location for a diver in the swimming position. • This redundant system contains two inner cells in one outer bag. Either cell is capable of generating 60 lbs of lift when it is full. Dive with peace of mind knowing that you’re carrying a redundant system • The WTX6R can mate directly to the WTX Harness or the Stainless Steel Back Plate using twin tank bands or using center bolts • Highly efficient drains allow water to empty quickly after a dive • Outer bag constructed out of Armorshield™ Cordura® to resist abraision and fading • Inner bags constructed from mil-spec welded fabric • A safety cable inside the elliptical hoses prevents hyperextension of the corrugated hoses • Features the Apeks technical inflator with brass buttons • The air cell closest to the diver has a pull dump on inside lower left with a capped-off port on the inside lower right for an optional right dump • The air cell furthest from the diver has a pull dump on outside lower right with a capped-off port on the outside lower left for an optional left dump • Accepts WTX Internal Retractor Kit part number: 388300 Check out the WTX Internal Retractor Kit that can be installed on this wing

  • Stainless Steel Tri-Glides With D-Ring
    $7.99

    XS Scuba

    Stainless Steel Tri-Glides With D-Ring

    3 Review(s)

    Stainless Steel Tri-glides with D-Ring

 
 

Set Ascending Direction

Items 1 to 32 of 39 total

per page
Page:
  1. 1
  2. 2
 

Free DRIS Regulator Bag

Get a Free DRIS Regulator bag with Regulator Purchases over $300

Free DRIS Regulator Bag

Get a Free DRIS Regulator bag with Regulator Purchases over $300

Free DRIS Regulator Bag

Get a Free DRIS Regulator bag with Regulator Purchases over $300

Free DRIS Regulator Bag

Get a Free DRIS Regulator bag with Regulator Purchases over $300

Free DRIS Regulator Bag

Get a Free DRIS Regulator bag with Regulator Purchases over $300