Scuba Diving Analog Gauges: Replace Outdated Gauges or Add New Gauges today

A clean, black and white face means the Tech SPG is easy-to-read. This naked gauge has a 2-inch diameter with a 1.75-inch face (RG2762). A Bourdon tube gauge, the Tech SPG is calibrated to 5000-psi in 100-psi increments (360-Bar in 10-Bar increments) for the highest level of accuracy. A tempered glass face is impact and scratch resistant, while the luminescent dial makes it easier to read in low light situations. Comes standard as a naked SPG with a spool to attach a hose swivel to the gauge. The Tech SPG is suitable for oxygen service and is CE approved. Hose lengths are dependent on diver preference and application. Here are some standard hose lenths as a starting point: Single tank diving: 32" hose Backmount doubles: 24-26", depending on height of diver Sidemount tanks: 6-9" hose length, depending on diver preference  

Battery removal tool fits I200 and I300 computers.   

Solid and compact brass SPG. This rugged and easy to read gauge works great as a primary or even backup pressure gauge for the beginner to the most advanced technical diver. Luminescent Faceplate Standard with Air Spool & Viton O-rings Oxygen Clean Available in 0-5000 PSI or 0-360 BAR Chrome-plated brass housing w/ Bourdon tube Scratch resistant Tempered Glass 2 in./50.8mm size

Halcyon pressure gauges are as reliable as they are accurate. We start with an industrial-strength spring designed for pressures beyond 5,000psi (400bar), high-quality materials, and a highly visible, luminescent face make this a common favorite among divers in all environments. Pick from our Standard or Stage pressure gauges. The weight and size of our Standard SPG gauge make it well suited as a primary SPG. The large, clear display is easy to read in all diving conditions.   KEY FEATURES OF THE STAGE SPG   Slightly smaller than our standard SPG Light weight helps balance stage/deco bottles Two models calibrated either for bar (0-360) or psi (0-5000) Nickel-plated brass with acrylic lens  

2 Inch BRASS and Glass Submersible Pressure Gauge, with High Pressure Spool and Viton orings. Boudon Tube is pinned for increased reliability and durability. Chrome plated 2" gauge. Available in White Face only. Made in Italy.  Genuine Italian Design and Construction Oxygen Clean All White Gauge Face - Easy Readability Pinned Boudon Tube Nickle/Chrome Plated Tempered Glass Face *This SPG is not currently available in Black/BAR  

Pony style button gauge with 1" face available in PSI only.

So a SPG is a SPG right? Well mostly, provided you are getting one that is quality. Obviously HOG (and others) have a proven track record of high quality SPG's for Technical Diving.   You are all familiar with the HOG SPG, no fancy red zone, and one hundred PSI increment markings and super easy to read.   Allow me to introduce a new variation...   The face is black, the needle and markings are in luminescent. What you can do while diving is take your light and shine it  down on your spg on your hip, then "charge" the luminescence for a couple seconds, unclip it and bring it up to read. If you have a scooter, you know your right hand is busy with your scooter. When you bring it up, you read the gauge, and then clip it off back to your hip. In light conditions you can read a standard HOG gauge with the white face without even a thought, in cave or other really dark conditions it isn't so fast. The Black face Hog Black Face Luminescent BAR is MUCH easier to read in those conditions, the luminescent needle over the black face and luminescent numbers and hundred psi increment markings makes for an easy and quick read.  Your eye is faster at adjusting over a white faced SPG.   This SPG uses the same gun metal chrome color as you find on the HOG regs. It just looks hot.  Brass and glass with Viton O-rings and is available in BAR!!

 Integrated stainless steel attachment shackle bolt snap (HL911) 360 degree swivel of bolt snap Full-size and robust quality pressure hose Airspool with Viton o-rings included Luminescent gauge face Wide 270 degree sweep from 0 to 500 psi Easy reading high-contract black face Built-in over pressure relief for safety HP hose is not included Manufactured in Italy  

Modular flexibility. The SWIV Pressure Gauge is an accurate and reliable submersible pressure gauge rated to 5,000 psi. Available as a stand-alone gauge or in any Oceanic SWIV console. Nitrox compatible to 50% O2 OceanGlo® luminescent gauge face absorbs light and glows approximately 7 times faster and longer than other materials Shock resistant bourdon tube mechanism Integrated temperature gauge One-way safety valve 500 psi fluorescent caution zone Double Kevlar braid high pressure hose with triple chrome plated marine brass fittings

Modular flexibility. The SWIV Pressure Gauge is an accurate and reliable submersible pressure gauge rated to 5,000 psi. Available as a stand-alone gauge or in any Oceanic SWIV console. Nitrox compatible to 50% O2 OceanGlo® luminescent gauge face absorbs light and glows approximately 7 times faster and longer than other materials Shock resistant bourdon tube mechanism Integrated temperature gauge One-way safety valve 500 psi fluorescent caution zone

Purchase this HP Quick Disconnect to allow you to add another QD onto any other HP hose.  Enabling you to unhook your Computer from one reg set, and easily put it onto another reg set.

1.75" Pressure module with hose

Wrist boot used with the Oceanic Veo Dive computer for easy mounting and readability on from the wrist!

Because it is nearly impossible to properly O2 clean a submersible pressure gauge, Apeks offers a high quality O2 pressure gauge, made from O2 compatible materials, that has been properly O2 cleaned during the manufacturing process. Dive safely and dive with confidence with an Apeks O2 Pressure Gauge • Designated as ready for O2 service by bright green boot • Range is 0 – 5000 psi • Luminous background provides a long phosphorescent effect. • Case is made from nickel plated brass • Large loop area designed into the housing for ease of attachment.

This compass wrist boot fits the Oceanic compass.  Great for keeping your compass on your wrist so it is easy to view while diving.  This is for the wrist boot only, compass NOT included.  

Try this on for size. The miniature Pony Bottle Gauge is a fully functional submersible pressure gauge rated to 5,000 psi. Ideal for back-up air supplies or decompression tanks, the Pony Bottle Gauge is the perfect accessory for use with wireless PDC's, allowing you to quickly pressure check your cylinder without linking your receiver unit. Threads directly into any standard first stage high pressure port Nitrox compatible to 100% O2 Large numbers and green, yellow and read indicators for easy monitoring One-way safety valve Readings to 5,000 psi SPG